• Restorative Dentistry and Endodontics
• /
• v.40 no.2
• /
• pp.113-122
• /
• 2015

Objectives: The aim of this paper was evaluating the ratios of electrical impedance measurements reported in previous studies through a correlation analysis in order to explicit it as the contributing factor to the accuracy of electronic apex locator (EAL). Materials and Methods: The literature regarding electrical property measurements of EALs was screened using Medline and Embase. All data acquired were plotted to identify correlations between impedance and log-scaled frequency. The accuracy of the impedance ratio method used to detect the apical constriction (APC) in most EALs was evaluated using linear ramp function fitting. Changes of impedance ratios for various frequencies were evaluated for a variety of file positions. Results: Among the ten papers selected in the search process, the first-order equations between log-scaled frequency and impedance were in the negative direction. When the model for the ratios was assumed to be a linear ramp function, the ratio values decreased if the file went deeper and the average ratio values of the left and right horizontal zones were significantly different in 8 out of 9 studies. The APC was located within the interval of linear relation between the left and right horizontal zones of the linear ramp model. Conclusions: Using the ratio method, the APC was located within a linear interval. Therefore, using the impedance ratio between electrical impedance measurements at different frequencies was a robust method for detection of the APC.

• Investigative Magnetic Resonance Imaging
• /
• v.9 no.1
• /
• pp.36-42
• /
• 2005

Purpose : To develop a novel approach to calculate the sensitivity profiles of the phased array coil for use in non-uniform intensity correction. Materials and Methods : The proposed intensity correction method estimates the sensitivity profile of the coil to extract intensity variations that represent the scanned image. The sensitivity profile is estimated by fitting a non-linear curve to various angles of projections through the imaged object in order to eliminate the high-frequency image content. Filtered back projection is then used to compute the estimates of the sensitivity profile of each coil. The method was applied both to phantom and brain images from 8-channel phased-array coil and 4-channel phased-array coil, respectively. Results : Intensity-corrected images from the proposed method have more uniform intensity than those from the commonly used 'sum-of-squares' approach. By using the proposed correction method, the intensity variation was reduced to $6.1\%$ from $13.1\%$, acquired from the 'sum-of-squares'. Conclusion : The proposed method is more effective at correcting the intensity non-uniformity of the phased-array surface-coil images than the conventional 'sum-of-squares' method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.2
• /
• pp.135-143
• /
• 2008

In this study, it was investigated for dynamic nonlinear characteristics using dynamic data obtained by shaking table test. The design of Tuned Liquid Damper(TLD) has limitation to plan based on Tuned Mass Damper(TMD) analogy and linear wave theory. Also, while there are many studies regarding properties of TLD under harmonic load, there are not estimated for dynamic non-linear characteristics of TLD under the load that is not governed by particular frequency like a white noise. This paper investigated dynamic non-linear characteristics of TLD varied with load amplitude using a white noise and suggested equations that can estimate damping ratio, natural frequency ratio and effective mass ratio of TLD.

• Journal of the Korean Magnetics Society
• /
• v.14 no.6
• /
• pp.232-235
• /
• 2004

Linear GMR isolator which is profitable for transmitting analog signal was modeled and the output voltage and current in relation to the input current were investigated. GMR isolator modeling was divided into two parts, namely magnetic and electric parts. The flow chart of the modeling was drawn in which the MR curve of the spin valves were incorporated to obtain the electrical voltage output. For magnetic modeling, 3-dimensional model of planar coil was analyzed by FEM method to obtain the magnetic field strength corresponding to the input current. Coil efficiency of the planar coil having magnetic core layer was shown to have about 1.5 times larger than that of the coil without the magnetic core layer. The feedback coil current(output current) corresponding to the input coil current was calculated to be within ${\pm}$0.25 mA of the linear fitting function of I$\_$out/= I$\_$in/-5 mA. Also, the response time and output waveforms were obtained when the coil current was a rectangular waveform. The rise time and fall time was 6 ${\mu}\textrm{s}$, respectively when the slew rate of the op-amp was 0.3 V/${\mu}\textrm{s}$.

• The Korean Journal of Applied Statistics
• /
• v.33 no.6
• /
• pp.813-821
• /
• 2020

Recently, research using unstructured data such as images and videos has been actively conducted in various fields. Edge detection is one of the most useful image enhancement techniques to improve the quality of the image process. However, it is very difficult to perform edge detection in noise images because the edges and noise having high frequency components. This paper uses a linear model and standard deviation as an effective edge detection method for noise images. The edge is detected by the difference between the standard deviation of the pixels included in the pixel block and the standard deviation of the residual obtained by fitting the linear model. The results of edge detection are compared with the results of the Sobel edge detector. In the original image, the Sobel edge detection result and the proposed edge detection result are similar. Proposed method was confirmed that the edge with reduced noise was detected in the various levels of noise images.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.4
• /
• pp.50-56
• /
• 2012

Rotor system is a very important part which produce lift, thrust and control force in helicopter. Component of rotor system must have structural integrity for applied load. The estimation of structural integrity is regarded greatly as important in aerospace field. In this study, the process of structural analysis performed for bearingless main rotor system of helicopter. The composite flexbeam and torque tube of bearingless main rotor are very thick, so 3D layered soild elements of MSC.PATRAN were used to get the finite element analysis results. To estimate structural integrity, non-linear static analysis considering geometric non-linearity is performed. In addition, detailed finete element analysis and non-linear static analysis are performed to consider the stress concentration for fitting effect and contact surface. The estimation process of structural integrity for bearingless main rotor system of helicopter may help the design.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.109-117
• /
• 2015

In this paper, we proposed error-reducing method to source or measure a current or voltage for LED in the I-V characteristic analysis system using a digital signal processor (DSP). this method has the advantage of reducing a non-linear circuit error and random error. random error can be reduced using recursive averaging technique and non-linear circuit error can be reduced using 2rd polynomial regression calibration parameters fitting with measured sample data. it corrects measured error of IR, VR, VF1, VF2, VF3 of LED using calibration parameters. experimental results show that can be performed with about 0.017~0.043% accuracy.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.481-481
• /
• 2000

We investigated the structure-activity relationships on use of multi-layer neural networks. The relationships are techniques required in developments of medicines. Since many kinds of observations might be adopted on the techniques, we discussed some points between the observations and the properties of multi-layer neural networks. In the structure-activity relationships, an important property is not that standard deviations are nearly equal to zero for observed physiological activity, but prediction ability for unknown medicines. Since we adopted non-linear approximation, the function to represent the activity can be defined by observations; therefore, we believe that the standard deviations have not significance. The function was examined by "leave-one-out" method, which was originally introduced for the multi-regression analysis. In the linear approximation, the examination is significance, however, we believe that the method is inappropriate in case of nonlinear fitting as neural networks; therefore, we derived a new index fer the relationships from the differential of information propagation in the neural network. By using the index, we discussed physiological activity of an anti-cancer medicine, Mitomycine derivatives. The neuro-computing suggests that there is no direction to extend the anti-cancer activity of Mitomycine, which is close to the trend of anticancer developing.

• Journal of Biomedical Engineering Research
• /
• v.37 no.2
• /
• pp.84-89
• /
• 2016

In this study, we proposed ameliorated method for region of interest (ROI) study to improve its accuracy using partial volume effect (PVE). PVE which arose in volumetric images when more than one tissue type occur in a voxel, could be used to reduce an amount of gray matter and cerebrospinal fluid within ROI of diffusion tensor image (DTI). In order to define ROIs, individual b0 image was spatially aligned to the JHU DTI-based atlas using linear and non-linear registration (http://cmrm.med.jhmi.edu/). Fractional anisotropy (FA) and mean diffusivity (MD) maps were estimated by fitting diffusion tensor model to each image voxel, and their mean values were computed within each ROI with PVE threshold. Participants of this study consisted of 20 healthy controls, 27 Alzheimer's disease and 27 normal-pressure hydrocephalus patients. The result showed that the mean FA and MD of each ROI were increased and decreased respectively, but standard deviation was significantly decreased when PVE was applied. In conclusion, the proposed method suggested that PVE was indispensable to improve an accuracy of DTI ROI study.

• The Korean Journal of Rheology
• /
• v.7 no.3
• /
• pp.211-224
• /
• 1995

묽은 고분자 용액의선형 점탄성과 완화시간 스펙트럼에 대하여 비드수, 유체역학적 상호작용, 배제 부피와 비선형 스프링들의 영향을 비드-스프링 모델을 통하여 연구하였다. Fixman의 모델을 개량하였고, 비선형 스프링개념을 도입한후 선형점탄성에 관한 식들을 유 도하였다. 그중에서 주로 복고 점도의 크기와 위상차에 대한 BSM 파라미터들의 영향을 살 펴보았다. 실험데이터에서 진동수에 따른 위상차의 평평한 부분의 길이로부터 비드수를 Mark-Houwink 식의 지수 값으로부터 유체역학적 상호작용 파라미터를 그리고 fitting 파라 미터로써 배제 부피 파라미터와 비선형 스프링 파라미터의 함수형태로 표현되는 동적 확장 파라미터를 결정할수 있었다. 또한 광산란 실험등으로부터 배제 부피 파라미터를 결정하게 된다면 이로부터 비선형 스프링 파라미터도 결정할수 있음을 알수 있었다. 한편 불연속적인 현태인 BSM의 완화시간 스펙트럼에 미치는 BSM 파라미터들의 영향을 분석함으로써 각 파람터의 효과와 차이점을 분명히 알수 있었다. 본논문에서는 BSM에 비드수, 유체역학적 상호작용 배제 부피 그리고 비선형 스프링 효과를 동시에 적용하는 방법을 제시하였으며 이 방법을 통하여 묽은 고분자 용액의 선형 점탄성 실험 데이터를 정량적으로 설명할 수 있었다.