• 소성∙가공
• /
• 제15권4호
• /
• pp.311-318
• /
• 2006

One of the most important quality problems in flat plate leveled from hot rolled coils in cut-to-Iength lines is bowing and cambering when they are cut in small width parts. It is verified analytically and experimentally that residual stress remained in plate is th ε source of the problem. In order to produce low residual stress flat plate from hot rolled coils, the proper conditions of leveling are studied and two things are implemented. One is proper plastic deformation area ratio to reduce residual stress within customer requirement by applying suitable plastic deformation and maintain leveling load within structural strength limit of leveler. The other is maintaining uniform plastic deformation along the width of the plate during leveling. Customer requirement for residual stress is met by applying above 70% of plastic deformation area ratio and uniform deformation along width of coil by adjusting back up rolls according to deformation analysis of work roll and back up roll assembly and leveling tests.

• 한국광학회지
• /
• 제11권4호
• /
• pp.265-270
• /
• 2000

이득 스위칭 $1.55\mu\textrm{m}$ UFB 반도체 레이저에서 외부 주입광의 전력과 파장이 시간 지터와 펄스 폭에 미치는 영향을 전송선로 레이저 모델에 기초한 모의 실험을 통하여 분석하였다. 주입 광 전력이 증가함에 따라 시간지터는 감소하고 펄스폭은 증가했으며, 최소 시간 지터는 주입 광의 파장이 첩된 스펙트럼의 중시과 일치할 때에 나타났다. 이에 따라, 외부 광 주입에 의해 펄스 폭의 증가 없이도 시간 지터를 대략 1/2.7배로 감소시킬 수 있었다. 모의 실험 결과는 본 실험결과와는 물론이고 이미 발표된 실험결과와 비교적 잘 일치함을 확인하였으며, 이는 본 모델이 반도체 레이저에 기초한 시스템 분석에 유용함을 입증한다.

• 한국의상디자인학회지
• /
• 제14권2호
• /
• pp.89-100
• /
• 2012

The purpose of this research is to compare the body proportion of the Mongolian and Korean men and women in their 20' s by comparing the characteristics of the body type that uses the body indexes, in order to provide the base data for the increased fit of the apparels. The results are as follows. 1) Histogram of the Rohrer' s Index for the Mongolian men and women in their 20s was examined. the Mongolian men, normal body type took up 48.0% while small body type comprised 50.0% and obese body type comprised 2.0%. the Mongolian women, normal body type comprised 61.5%, small body type comprised 22.1% and obese body type comprised 16.4%. 2) The body proportion of Korean men has 1:1.62 with upper body and low body part on a waist basis, and Mongolian men has 1:1.65. Thus Mongolian men has longer pan of lower body than Korean men. 3) Mongolian women has longer part of lower body and has higher rates of hip height, crotch height, knee height than Korean women. Mongolian women has high rate of hip line and calf length. 4) As a result comparison using the body index of Mongolian and Korean women (bust thickness/ bust width, waist thickness / waist width, hip thickness / hip width, when regarding the height as 100 ), it was found that Mongolian women are flatter than korean women.

• 대한가정학회지
• /
• 제49권9호
• /
• pp.25-33
• /
• 2011

The number of Ryu Ji Kyung's costumes that have been discovered is small but includes various kinds of coat. These coats have become important clues when trying to determine styles of coat that were present in the mid-17he composition of the costumes found were various, including unlined, lined, padded and quilted variations. Unlined clothes were sewed using broad-stitching, hemming, half backstitching, and backstitching. The unique sewing style of the 17th century was shown in Ryu Ji Kyung's costumes. Seams on the back of one coat were not connected but rather sewed as a whole because of the width of the cloth. There was a more elaborate sewing style on lined clothes than on unlined clothes, alongside the use of selvage on the reverse of the costumes, marking the face not by using other clothes, but by the sewing line. Because of their to kit types, the width of the sleeves, the presence of a Cheolrik string, the ratio of the upper jacket to the bottom skirt, and the width between the armpits and bottom hems in Jungchimak, Ryu Ji Kyung's clothes can be used as exemplary models of mid-17th century clothing.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1244-1255
• /
• 2017

The space vector pulse width modulation (SVPWM) technique is a popular PWM method for medium voltage drive applications. Conventional SVPWM (CSVPWM) and bus clamped SVPWM (BCSVPWM) are the most common SVPWM techniques. This paper evaluates the performance of various advanced BCSVPWM strategies in terms of their harmonic distortion and switching loss based on a uniform frame work. A uniform frame work, pulse number captures the performance parameter variations of different SVPWM strategies for various number of samples with heterogeneous pulse numbers. This work compares different advanced BCSVPWM techniques based on the modulation index and location of the clamping position (zero vector changing angle ) of a phase in a line cycle. The frame work provides a fixed fundamental frequency of 50Hz. The different BCSVPWM switching strategies are implemented and compared experimentally on a 415V, 2.2kW, 50Hz, 3-phase induction motor drive which is fed from an IGBT based 2 KVA voltage source inverter (VSI) with a DC bus voltage of 400 V. A low cost PIC microcontroller (PIC18F452) is used as the controller platform.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.7-8
• /
• 2009

Non-contact critical current measurement apparatus was developed using hall probe which measures the magnetic field distribution across the width of superconducting tape. The hall probe consists of 7 independent hall sensors which lie in a line 600 ${\mu}m$. The difference between maximum and minimum magnetic field in the magnetic filed distribution is a main parameter to determine the critical current. As preliminary research, we calculated the magnetic field intensity at the middle sensor, which is a minimum magnetic field and generated by the circular shielding current modeled by Bean model. We confirmed that there are some parameters that affect on the minimum magnetic field; the distance between superconducting layer and hall sensor, the width of superconducting tape, and the critical current distribution across the width of superconducting tape. Among these parameters, the distance between superconducting layer and hall sensor highly influences on the minimum magnetic field.

• ETRI Journal
• /
• 제33권3호
• /
• pp.335-343
• /
• 2011

The pad pitch of modern radio frequency integrated circuits is in the order of few tens of micrometers. Connecting a large number of high-speed I/Os to the outside world with good signal fidelity at low cost is an extremely challenging task. To cope with this requirement, we need reflection-free transmission lines from an on-chip pad to on-board SMA connectors. Such a transmission line is very hard to design due to the difference in on-chip and on-board feature size and the requirement for extremely large bandwidth. In this paper, we propose the use of narrow tracks close to chip and wide tracks away from the chip. This narrow-to-wide transition in width results in impedance discontinuity. A step change in substrate thickness is utilized to cancel the effect of the width discontinuity, thus achieving a reflection-free microstrip. To verify the concept, several microstrips were designed on multilayer FR4 PCB without any additional manufacturing steps. The TDR measurements reveal that the impedance variation is less than 3 ${\Omega}$ for a 50 ${\Omega}$ microstrip and S11 better than -9 dB for the frequency range 1 GHz to 6 GHz when the width changes from 165 ${\mu}m$ to 940 ${\mu}m$, and substrate thickness changes from 100 ${\mu}m$ to 500 ${\mu}m$.

• 한국작물학회지
• /
• 제42권6호
• /
• pp.810-813
• /
• 1997

대두 종자크기에 대한 간접적인 선발형질로써 잎크기에 대한 이용 가능성을 알기 위하여 종자크기에 있어서 큰 차이를 보이는 12개의 line을 선발하여 2년간 포장시험을 실시하였다. 종자크기와 잎크기의 차이에 있어서 고도의 유의성을 나타내었고 개화전 종자크기에 대한 간접선발로써 잎크기의 이용성이 가능할 것으로 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.97-103
• /
• 2002

This study was carried out to obtain basic information on racking resistance of shear walls and the factors affecting racking resistance of shear walls. Shear walls constructed by larch lumber nominal 50 mm × 100 mm framing and various sheathing materials were tested by applying monotonic and cyclic load functions. Shear walls with various stud spacing such as 305 mm, 406 mm, and 610 mm were tested under both of monotonic and cyclic loads and shear walls with various aspect (height-width) ratios were tested under cyclic load functions. The effect of hold-down connectors in shear walls was also tested under cyclic load functions. Racking resistance of shear walls has very close linear relation with stud spacing and width of shear walls. The ultimate racking strength of shear walls was reached at around or before the displacement of 20 mm. It was proposed in this study that the minimum racking strength and minimum width for shear wall be 500 kgf and 900 mm, respectively. Load-displacement curves obtained by racking tests under monotonic load functions can be represented by three straight line segments. Under cyclic load functions, envelope curves can be divided into three sections that can be represented by straight lines and the third section showed almost constant or decreasing slope.

• 한국재료학회지
• /
• 제14권1호
• /
• pp.1-8
• /
• 2004

Laser weldability of aluminized steels for deep drawing application has been investigated. Test coupons for Nd:YAG laser welding and $CO_2$ laser welding were prepared trom the commercial steels. According to the test results, total penetration and back bead width of aluminized steels were sensitive to the welding conditions. Bead width at the half thickness of the overlap joint, however, was rather constant. Laser weldability of aluminized steels was superior to that of zinc coated steel. Weld microstructure revealed that overlap zone adjacent to the fusion line was filled with coated materials, which was thought to be desirable to protect weld from crevice corrosion. The aluminum coated materials was also found in the weld metal. Practically no spattering was observed in the laser welding of aluminized steels even when the welding was performed without joint gap. In the welding of zinc coated steel, however, spattering was so severe that it was difficult to get the acceptable weld. Bead quality of aluminized steel laser weld was smooth and stable.