• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.165-170
• /
• 1998

The paper describes developed method of feedforward digital modulation of line-to-line voltage of 3-phase inverter for drive application. It is based on representation of parameters of output voltage of inverter in function of operating frequency of drive system. Pure algebraic control laws and big computational simplicity characterize this scheme of modulation. It has been presented results of simulation of adjustable drive systems with the method of pulse-width modulation described.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.154-161
• /
• 2003

The effects of specimen geometry, and loading conditions on the J-integral fur CCT (center cracked tension) specimens are investigated by using FEM. It is found that the J-integral tends to decrease according to the parallel tensile loading to crack line. Furthermore, it is verified that the compressive parallel loading to crack line is likely to increase the J-integral. A stress ratio of length to width of the center CCT specimen is confirmed to affect the J-integral significantly.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.16-16
• /
• 2014

본 논문에서는 polymer 기판 위에 direct inkjet patterning을 효율적으로 수행하기 위하여 기판 표면의 chemical bonding과 morphology를 in-line system 적용이 가능한 near atmospheric pressure plasma (N-APP)를 이용 하여 기판을 modifying 시켰다. modified substrate 위에 inkjet printing을 이용하여 metal interconnection을 하였다. 그 결과 기존 기판에서의 line width 보다 얇은 선폭을 획득 하였고 adhesion이 향상 되었다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.141-143
• /
• 2015

본 연구는 해변의 양측에서 퇴적되고 해변 중앙에서 침식이 일어나고 있는 광안리 해수욕장에 최소 해빈폭을 최대로 하는 최적의 양빈 설계를 하고자 실시하였다. 광안리 해수욕장에 3가지 case의 양빈안을 수치 모의 시나리오로 구성하여 OneLine Shoreline Model을 적용하여 해빈폭의 시간적 변화를 모의하였으며, Cross-shore Profile Model을 적용하여 연평균 파고에 따른 전진폭과 최고 파고에 따른 침식폭을 추정하였다.

• Journal of the Korean earth science society
• /
• v.31 no.4
• /
• pp.348-353
• /
• 2010

The scattered light of solar radiance near the infrared ray area was observed to measure $H_2O$ and $O_2$ absorption lines. The changes of $H_2O$ and $O_2$ equivalent width were calculated on the basis of the measurement. $O_2$ equivalent width showed negative correlation with the amount of solar radiance; $O_2$ equivalent width had a tendency to diminish as the amount of the solar radiance increased and to increase as the amount of the solar radiance decreased. On the other hand, $H_2O$ equivalent width showed the positive correlation with the amount of solar radiance. Especially it was noted that the sum of equivalent width of absorption lines created by $H_2O$ and $O_2$ in a day was fairly constant. It is implied that the constant equivalent width is caused by the complementary development of photodissociation and recombination in $O_2$ and $H_2O$.

• Tribology and Lubricants
• /
• v.11 no.2
• /
• pp.15-23
• /
• 1995

A zero-load slider is composed of two outside rails which produce a lift force pushing up the slider from the disk surface and a wide reverse step region which produces a suction force attracting the slider to the disk surface. In this paper, the flying characteristics of zero-load sliders are obtained by using an optimization technique. In the pressure calculation module, the FIFD scheme is used to solve the modified Reynolds equation. The BFGS method and a line search algorithm is employed to predict the static flying attitude. To investigate the effect of the geometric- parameters of zero-load sliders on the flying characteristics, recess depth, front step width, rail width, and taper height are varied and the corresponding flying attitudes are obtained. Simulation results demonstrate that recess depth and rail width have significant influences on the flying characteristics.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.369-372
• /
• 2002

This paper presents a family of continuous conduction mode with constant-switching pulse width modulator controllers. Unified implementation of quasi steady state approach for various DC-DC converters topoiogies is illustrated. The property and control low for quasi-state approach will be discussed in this paper. The different procedures will be discussed in details with different results for five commonly used DC-DC converters. Both trailing and leading edge pulse width modulation are used. Leading edge modulation can some times lead to simpler control circuitry as will be demonstrated in some circuits. These controllers do not require the multiplier in the voltage feed back loop, error amplifier in the current loop and rectified line voltage sensor, which are needed by traditional control methods. Controller examples and design arc analyzed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1089-1092
• /
• 2001

In the stereolithography process, build parameters are laser power, scan velocity, scan width, bean diameter, layer thickness and so on. These values are determined according to product accuracy and build time. Build time can be reduced by improving of scan velocity, laser power, layer thickness, hatching space and so on. But variation of these parameters influence part accuracy, surface roughness, strength. This paper observed cure properties in various beam diameter. In order to examine these, relationships of scan velocity and cure depth, scan velocity and cure width according to various beam diameter in one scan line are measured. And cure thickness is measured according to beam diameter and scan velocity in scan surface of one layer. For reduction of build time, beam diameter and scan velocity is proposed in stereolithography process.

• The Journal of the Korean dental association
• /
• v.53 no.7
• /
• pp.450-456
• /
• 2015

Even the adult cleft lip and palate patient who has not had timely treatment during the growth period, can be treated with orthodontic treatment without the necessity of orthognathic surgery if only the patient is treated under correct diagnosis and fitting appliances. Initially, maxillary arch form is established by constructing trifocal circles. Posterior region can be expanded and derotated laterally with pentahelix and anterior teeth are aligned with Tiggle brackets and "ㄷ"-shaped spring. Thereafter, anterior and posterior regions are consolidated. Mandibular intercanine width should be adjusted to maxillary intercanine width which was unavoidably reduced. Mandibular anterior tooth extraction will be helpful to attain proper mandibular intercanine width and better anterior dental showing.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.1
• /
• pp.19-24
• /
• 1984

This study was carried out to find out the variations in Burley 21 variety of Surely tobacco. Jeonjul and nine other selected lines of Burley 21 were evaluated. Plant height and several other characteristics were significantly different among tested lines. Especially, Jangsu-1, the earliest flowered line, flowered 5 to 7 days earlier than other lines and had the smallest length width ratio of the largest leaf. Narrow-leaved type, whose length/width ratio of the largest leaf was above 2, 16, was significantly different in number of leaves and weight per unit leaf area from broad-leaved type whose length/width ratio of the largest leaf being below 1.97. Among tested lines, Jeonju (2) - 2 was the best in major agronomic characteristics, yield and physical properties.