• Advances in concrete construction
• /
• 제5권5호
• /
• pp.451-468
• /
• 2017

The problem of reducing the self-weight of reinforced concrete structures is very important issue. There are two approaches which may be used to reduced member weight. The first is tackled through reducing the cross sectional area by using voids and the second through using light weight materials. Reducing the weight of slabs is very important as it constitutes the effective portion of dead loads in the structural building. Eleven slab specimens was casted in this research. The slabs are made one way though using two simple supports. The tested specimens comprised three reference solid slabs and eight styropor block slabs having (23% and 29%) reduction in weight. The voids in slabs were made using styropor at the ineffective concrete zones in resisting the tensile stresses. All slab specimens have the dimensions ($1100{\times}600{\times}120mm$) except one solid specimens has depth 85 mm (to give reduction in weight of 29% which is equal to the styropor block slab reduction). Two loading positions or cases (A and B) (as two-line monotonic loads) with shear span to effective depth ratio of (a/d=3, 2) respectively, were used to trace the structural behavior of styropor block slab. The best results are obtained for styropor block slab strengthened by minimum shear reinforcement with weight reduction of (29%). The increase in the strength capacity was (8.6% and 5.7%) compared to the solid slabs under loading cases A and B respectively. Despite the appearance of cracks in styropor block slab with loads lesser than those in the solid slab, the development and width of cracks in styropor block slab is significantly restricted as a result of presence a mesh of reinforcement in upper concrete portion.

• 대한물리의학회지
• /
• 제16권2호
• /
• pp.45-52
• /
• 2021

PURPOSE: This study examined the imaging procedure of pectoralis minor muscle thickness and assessed the intra- and inter-rater reliability of the muscle thickness measured by two raters using rehabilitative ultrasound imaging (RUSI) in healthy individuals. METHODS: Fifteen participants (aged 21 - 28, seven females, and eight males) were involved in the study. The primary rater palpated the coracoid process and the fourth rib, defined as the width of the index finger lateral to the sternum to avoid breast tissues, and lined the two landmarks. The second examiner checked 1 / 3 (1st point) and 1 / 2 (2nd point) of the line length as measurement points. The two raters obtained right side muscle images of the participants at a standardized sitting position using RUSI with a 7.5 MHz linear transducer at 40mm depth. For intra-rater reliability, the principal rater took three images per point and tried to take one more with an interval. For the inter-rater reliability, the other rater performed the same tasks as the principal rater on the same day. The reliability was analyzed using the intra-class correlation coefficient (ICC), the standard error of the measurement (SEM), and Bland and Altman plots. RESULTS: The reliability at all points was excellent for the same rater (ICC_3,1 = .973 - .978, SEM = .042 - .046), and between raters (ICC_2,1 = .939 - .959, SEM = .059 - .097). CONCLUSION: These findings show that the RUSI could be reliable for examining the pectoralis minor muscle thickness in healthy individuals at all measurement sites.

• 한국산업보건학회지
• /
• 제31권4호
• /
• pp.521-530
• /
• 2021

Objectives: This was to examine and explore the elements of Size Korea 6th 3D head anthropometric database and to provide basic information for the selection of respirators in Korea. Methods: This was a pilot study for the first year of work in a two-year-project initiated at KOSHA in 2021. 3D head dimensions data were obtained from the Size Korea Center managing the Size Korea 6th 3D national anthropometry survey databases. The 3D head dimensions data, including 45 dimensions, were used in line with ISO standards (e.g., ISO/TS 16976-2) for examinations, comparisons, statistical analyses, etc. Results: A total of 3,088 subjects were finally determined in this study. The main features were: Male subjects were 52.5%; the highest age group was 15-29 at 36.7%; unhealthy weight group based on BMI was 31.7%; and survey area was the capital region. For the 6th 3D head dimensions data with 45 items, the means and standard deviations for 'Face length' were 115.9±7.5 cm for males and 107.3±6.9 cm for females respectively while those for 'Face width' item were not available since there was no such item in the data. Numerous findings were discussed accordingly. Conclusions: This study showed that there were likely requirements for improvements in the 6th 3D head anthropometric data as follows: Standardization of Korean and English terms; addition of head dimensions items missed in the Size Korea survey; and reliability of generalizability for subjects, suggesting that the study results can be used for further studies or improvement of respirator selection in Korea.

• 한국육종학회지
• /
• 제42권4호
• /
• pp.357-364
• /
• 2010

In a previous study, we mapped 12 QTLs for 1,000 grain weight (TGW) in the 172 $BC_2F_2$ lines derived from a cross between Oryza sativa ssp. Japonica cv. Hwaseongbyeo and O. rufipogon. These QTLs explained 5.4 - 11.4% of the phenotypic variance for TGW. Marker-aided selection combined with backcrosses was employed to develop QTL-NILs for each QTL. $BC_2F_2$ lines with each target QTL were backcrossed to Hwaseongbyeo twice and then allowed to self to produce $BC_4F_5$ populations. SSR markers linked to TGW were employed to select QTL-NILs with the respective target QTL. Six QTL-NILs with the recurrent parent, Hwaseongbyeo were evaluated for nine traits for three years from 2007 and 2009. Differences were observed between each of the 6 QTL-NILs and Hwaseongbyeo in TGW. In addition to TGW, these QTL-NILs displayed differences in other agronomic traits possibly indicating a tight linkage of genes controlling these traits. The direction of the QTL for TGW in 6 QTL-NILs was consistent as in the $BC_2F_2$ lines from the same cross. Difference in TGW between each of the QTL-NILs and Hwaseongbyeo was associated with the difference in one or two grain shape traits; grain length, grain width, and grain thickness. SSR markers linked to the QTL for TGW will facilitate selection of the grain shape character in a breeding program to diversify grain shape and provide the foundation for map-based gene isolation. Also, the QTL-NILs developed in this report and the progenies from crosses between the QTL-NILs will be useful in clarifying epistatic interactions among QTLs for TGW.

• 한국육종학회지
• /
• 제42권6호
• /
• pp.717-720
• /
• 2010

경기도농업기술원 선인장연구소에서는 다육식물 내수시장 확대를 위하여 1998년부터 국내의 재배농가와 종묘업체로부터 유전자원을 수집한 후 2001년부터 2009년에 걸쳐 교배 및 계통선발을 하고 3회의 특성검정을 거쳐서 꽃기린 신품종 '파노라마'를 육성하였다. 기존 꽃기린 품종은 포화엽색이 적색, 분홍색 등 단색인 품종이었으나 새로 육성된 '파노라마' 품종은 포화엽색이 녹색과 분홍색(RHS color chart 135B+54C)이 어우러진 복색이면서 고급스런 색체의 이미지를 준다. 측지수는 4.3개 발생하며 포화엽폭은 2.0 cm로 대륜성 품종이다. 줄기에 꽃차례 분지단수가 2~3개로 많이 발생하는 다화성으로 관상가치가 우수한 품종이다.

• Journal of electromagnetic engineering and science
• /
• 제19권1호
• /
• pp.64-70
• /
• 2019

In this study, a compact series-fed center-fed open-stub (SFCFOS) linear array antenna for K-band applications is presented. The antenna is composed of a single-line 10-element linear array. A symmetrical Chebyshev amplitude distribution (CAD) is used to obtain a low sidelobe characteristic against a uniform amplitude distribution (UAD). The amplitude is controlled by varying the width of the microstrip patch elements, and open-ended stubs are arranged next to the last antenna element to use the energy of the radiating signal more effectively. We insert a series-fed stub between two patches and obtain a low mutual coupling for a 4.28-mm center-to-center spacing ($0.7{\lambda}$ at 21 GHz). A prototype of the antenna is fabricated and tested. The overall size of the uniform linear array is $7.04{\times}1.05{\times}0.0563{\lambda}_g^3$ and that of the Chebyshev linear array is $9.92{\times}1.48{\times}0.0793{\lambda}_g^3$. The UAD array yields a ${\mid}S_{11}{\mid}$ < -10 dB bandwidth of 1.33% (20.912-21.192 GHz) and 1.45% (20.89-21.196 GHz) for the CAD. The uniform array design gives a -23 dB return loss, and the Chebyshev array achieves a -30.68 dB return loss at the center frequency with gains of 15.3 dBi and 17 dBi, respectively. The simulated and measured results are in good agreement.

• 디지털융복합연구
• /
• 제17권3호
• /
• pp.161-168
• /
• 2019

전자펜의 소비자 활용도 및 제품 개선점 분석을 위해 Davies(1989)의 TAM 모형을 적용하여 전자펜 사용자들의 지각된 유용성, 이용용이성 및 기대가치를 통한 기술수용의도를 분석하였다. 연구방법으로 기업 설문내용에 기반 한 내용분석법과 고객들의 참여도인 Activity 분석을 통해 전자펜 제품의 기술수용정도와 제품 전략의 개선점을 도출하였다. 연구결과 전자펜의 활용도를 보인 고객들은 30~49세의 남성과 사무직과 연구원으로 나타났으며, 개선사항에 대한 키워드 중심의 내용분석법의 분석결과 전원동작의 개선, App 연계 펜 기능의 확장성, 전자펜의 수정기능, 펜의 데이터인식 기능, 전자펜이 펜으로서의 필기감, 그립감, 펜 굵기 선택 등 세분화 기능의 개선, 타 스마트 기기와의 동기화 개선과 충전기능의 개선 필요성이 추출되었다. 본 연구는 전자펜에 TAM을 적용하여 전자펜이 초기시장에서 주류시장으로 확산되기 위한 제품속성 개선점을 제시하였고 향후 스마트폰이나 아이패드 등 스마트 디바이스와 연계된 전자펜 제품 확산과의 차이점 규명 통해 차별화 된 시사점을 제공할 수 있을 것이다.

• 패션비즈니스
• /
• 제23권1호
• /
• pp.25-36
• /
• 2019

The purpose of this study is to offer a base line data to facilitate entrance of a Korean fashion company into the Uzbekistan market by conducting a survey of the Uzbekistan students in Korea. This is done in order to gather data on their clothes wearing condition and factors affecting the purchase intention for Korean fashion products. In this study, a survey was conducted to 260 Uzbekistan students in Korea. The results of the study were as follows: 1) Uzbekistan students bought clothes mainly from road shops and the Internet. They bought a lot of pants, shirts, jackets, jumpers, and preferred to wear black, white, blue, and red color. The dissatisfactory parts were shown in order of the width of trousers, the length of the sleeve, and the shoulder. The most unsatisfying products were the pants and T-shirt. 2) They considered the aesthetics of the fashion products evaluation criteria, the human source and the internet advertisement of the fashion information source, and the customer service of the store selection criteria. These students showed very favorable attitude towards Hallyu and Korea. In addition, their preference and purchase intention for KFP were high. 3) The level of satisfaction on 'quality', 'color', and 'care' of KFP were very high, but lowest on the 'size' and 'price' of the clothes. 4) It was revealed that the attitude toward Hallyu and Korea, the satisfaction and preference of KFP, and demographics have a significant impact on the intention toward purchasing fashion products.

• 패션비즈니스
• /
• 제22권5호
• /
• pp.96-112
• /
• 2018

This study developed the pants pattern, that improved appearance and gesture functions in clothes to resolve inconveniences in case of activities with being adequate in fitness of slim-fit pants for obese adolescents. The slim-fit pants pattern was developed through the fitting test after designing and making the pattern of the experimental clothing A(c/pu; 99/1%) with the primary commercial clothing as basic prototype, through the fitting test and implementation of the experimental clothing, modified and supplemented secondarily, and through the fitting test of the second experimental clothing, modified and supplemented tertiary. In terms of findings, first, as a result of analyzing the commercial slim-fit pants, it is interpreted to have projected an optical illusion, that appears to be slim due to being narrow in width of the front panel when observed from the front of the pants. Second, in the fitting test of the first experimental clothing, the prototype of commercial clothing was understood to have improved butt, crotch, waist and femoral regions. Third, pattern design of the second experimental clothing was allowed to decline abdominal pressure, in case of the sitting position, by making the crotch line in the front panel short and by handling it with a yoke belt, and was processed a difference between waist and hip circumference in the back panel, with a rubber band in the whole waist part. Fourth, in the gesture function test of the third experimental clothing, high evaluation was received in every item excluding the knee region.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.253-264
• /
• 2019

This study characterized the chemical compounds in tannin from mangium (Acacia mangium) bark extract and determined the physical-mechanical properties of glued laminated timber (glulam) made from sengon (Falcataria moluccana), jabon (Anthocephalus cadamba), and mangium wood. The adhesives used to prepare the glulam were based on mangium tannin and phenol resorcinol formaldehyde resin. Five-layer glulam beams measuring $5cm{\times}6cm{\times}120cm$ in thickness, width, and length, respectively, were made with a glue spread of $280g/m^2$ for each glue line, cold pressing at $10.5kgf/cm^2$ for 4 h and clamping for 20 h. Condensed mangium tannin consisted of 49.08% phenolic compounds with an average molecular weight of 4745. The degree of crystallinity was 14.8%. The Stiasny number was 47.22%. The density and the moisture content of the glulams differed from those of the corresponding solid woods with mangium having the lowest moisture content (9.58%) and the highest density ($0.66g/cm^3$). The modulus of rupture for all glulam beams met the JAS 234-2003 standard but the modulus of elasticity and the shear strength values did not. Glulam beams made with tannin had high delamination under dry and wet conditions, but glulam made from sengon and jabon wood met the standard's requirements. All glulam beams had low formaldehyde emissions and were classified as $F^{****}$ for formaldehyde emissions according to the JAS 234 (2003) standard.