• Progress in Superconductivity and Cryogenics
• /
• v.6 no.3
• /
• pp.16-20
• /
• 2004

YB $a_2$C $u_3$$O_{7-x}$ (YBCO) films were deposited on (100) SrTi $O_3$ single crystal substrates by a metal organic chemical vapor deposition (MOCVD) system of hot-wall type using single liquid source. Under the condition of the mole ratio of Y(tmhd)$_3$:Ba(tmhd)$_2$:Cu(tmhd)$_2$= 1:2.1:2.9. the deposition pressure of 10 Torr. the MO source line speed of 15 cm/min. the Ar/ $O_2$ flow rate of 800/800 sccm. YBCO films were prepared at the deposition temperatures of 780∼89$0^{\circ}C$. In case of the YBCO films with 2.2 ${\mu}{\textrm}{m}$ thickness deposited for 6 minutes at 86$0^{\circ}C$. XRD pattern showed complete c-axis growth and SEM morphology showed dense and crack-free surface. The atomic ratios of Ba/Y and Cu/Ba in the film were 1.92 and 1.56. respectively. The deposition rate of the film was as high as 0.37 ${\mu}{\textrm}{m}$/min. The critical temperature ( $T_{c.zero}$) of the film was 87K. The critical current of the film was 104 A/cm-width. and the critical current density was 0.47 MA/$\textrm{cm}^2$. For the thinner film of 1.3 ${\mu}{\textrm}{m}$ thickness. the critical current density of 0.62 MA/$\textrm{cm}^2$ was obtained.d.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.1
• /
• pp.129-143
• /
• 1997

This study is about'The Costumes of Ch'oyong dance. (namely Ch'oyong-mu-bok; 처용무복)': emphasis on its structure and change. 1 studied Akhakguebum (the book of music and dance; 낙학궤범), Eui-Gue-Do (a collection of a series of paintings showing the whole processes of the royal courtesies and ceremonies; 의궤도) and some genre painting (풍증화). 'The costumes of Ch'oyong-Dance'were composed of robe(의), pants-skirt(대) , outer-skirt (상) , scarf-string(천의·길경) , shirt(한삼) , hat with mask (사교·가면) , belt(대) and shoes (혜) . According to the position, the colours of robe(의) and pants-skirt(군) were different. What is called, it is'the Colour of Five-Position (오방색) .'The Costumes of choyong-Dance' can be divided three factors by its symbolic means; i. e. shamanism, buddhism and bureaucratism. The pants-skirt(군), outer-skirts(상), scarf · string(천의·길경) and mask are considered as shamanic factor. However, the scarf(천의) , string(길경) and patterns(만화)which are decorated with many lotus patterns enclosed with vine are considered as buddhistic factor. And the hat (사모) , robe(의) , outer-skirt(상) , belt(대) and shoes(잔) are considered as bureaucratic factor. Ch'oyong is endowed with some power by these factors, and its symbolic means became stronger and enlarged by 'the Colour of five-position'. As time goes, the forms and details of robe had been changed noticeable; sleeve-width, neck-line and patterns. The shamanic, buddhistic and bureaucratic factors are reduced. These changes were derived from the changes of Ch'oyong·Dance. On the ground of the shape of mask and round-neckline robe(단영) , someone has an opinion that Ch'oyong is an aribian. However, according to this study, Ch'oyonh is Korean traditional thing; round-neckline robe already existed and settled in Silla dynasty and Ch'oyong-mask symbolized shamanic power.

• Archives of Reconstructive Microsurgery
• /
• v.9 no.2
• /
• pp.147-153
• /
• 2000

Soft tissue defects of the dorsum of foot and ankle can be covered from skin graft to free tissue transfer. The extent of injury which may be complex including the exposure of paratenons or bones requires free flap reconstruction. Some of the precautions for reconstruction are providing minimal bulkiness and well conforming to irregular contour thus making normal footwear possible. Though the muscle flap having its advantages and versatility, the fascial flap such as temporoparietal fascial flap has been considered the choice for reconstruction of the dorsum of foot and ankle. The purpose of our study is to utilize the advantages and versatility of the muscle flap as a first choice for reconstruction for the defects involving the dorsum of foot and ankle. The gracilis muscle with its anatomic and donor characteristics, it can be utilized to maximal effect by expanding its slim muscle width removing the epimysium and reducing its bulk by muscle atrophy through denervation. We present our experience with ten cases of reconstruction for the dorsum of foot and ankle using the gracilis muscle free flap. Results were satisfactory without flap loss, skin loss and infection. The contour and aesthetic aspect of the foot was satisfactory. Gait analysis showed near normal gait without limitations from everyday activities. Normal footwear was tolerable in all the cases. The keys to consider in the reconstruction of the dorsum of foot and ankle are appropriate bulkiness, conforming to its contour and able to apply normal footwear. With minimal donor morbidity and satisfying results, the extended gracilis muscle should be considered as the first line for reconstruction of the ankle and dorsum of foot.

• Journal of Fashion Business
• /
• v.7 no.2
• /
• pp.1-14
• /
• 2003

This study were to grasp the present situation of the pet wear market and the problem of pet wear, and to develop the pet wear pattern which agrees well to dog's shape and movements. We carried out survey research to analyze the actual pet wear market condition for a dog-lover, and movement analysis and sensory test to develop a pattern for Maltese which was the favorite dog among Korean. For data analysis, ANOVA with duncan test, T-test were conducted using SPSS statistic program(ver. 10.0). The results are as follows: 1. The results of the survey research, 75% of dog-lover had a pet wear and favorite was T-shirts. The problems of wearing T-shirts were 'too tight seam sleeve and bodice(front legs hole)', 'the clothes easily hang down' and 'easily taken off due to large neck size'. 2. The ease amount of the developed pattern was given according to the results of dog's shape and movement analysis, and the results of sensory test, there is a significant difference in the following items: depth of front neck line, front chest${\to}$abdomen curve, ease amount of sleeve, comfort level of leg parts. 3. The size of each parts of the developed pattern in this study were as follows : neck girth 27.0cm, body girth 40.0cm, back length 26.0cm, front leg girth 23.0cm, sleeve length 20.7cm, sleeve width 14.4cm. But, there exists some limits to generalize these results since dog's body size and shapes are various according to dog species. Therefore, further studies are needed to develop each pet wear pattern for each dog species.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3917-3922
• /
• 2010

In this paper, 3 stage amplifier MMIC was designed and fabricated with U-band optimized epitaxal pHEMT that produced by large signal characterization and modeling for 60 GHz band. The pHEMT used in this paper, the gate $0.12\;{\mu}m$ length and total gate width of $100\;{\mu}m$, $200\;{\mu}m$ has been modeled using the large signal designed with negative feedback and MCLF instead of MIM capacitor for improving stability. Fabricated MMIC $2.5{\times}1.5mm^2$ size, current about 40 mA, operating frequency 59.5~60.5 GHz, gain 19.9~18.6 dB, input matching characteristics -14.6~-14.7 dB, output matching characteristics -11.9~-16.3 dB and output -5 dBm characteristics were obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.5
• /
• pp.149-158
• /
• 2002

Recently, the minimum line width shows a tendency to decrease and the multi-level increases in semiconductor. Therefore, a planarization technique is needed and chemical mechanical polishing(CMP) is considered as one of the most suitable process. CMP accomplishes a high polishing performance and a global planarization of high quality. However there are several defects in CMF, such as micro-scratches, abrasive contaminations and non-uniformity of polished wafer edges. Wet etching process including spin-etching can eliminate the defects of CMP. It uses abrasive-free chemical solution instead of slurry. On this study, ILD(Interlayer-Dielectric) was removed by CMP and wet etching process using DHF(Diluted HF) in order to investigate the possibility of planrization by wet etching mechanism. In the thin film wafer, the results were evaluated from the viewpoint of material removal rate(MRR) and within wafer non-uniformity(WIWNU). And the pattern step heights were also compared for the purpose of planarity characterization of the patterned wafer. Moreover, Chemical polishing process which is the wet etching process with mechanical energy was introduced and evaluated for examining the characteristics of planarization.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.2
• /
• pp.53-57
• /
• 2008

This paper designed and fabricated the printed dual monopole antenna with CPW feeder for PCS and UWB(Ultra-Wide Band) band. In this paper, modified dual monopole antenna is proposed transform conventional monopole antenna to get dual band frequency. The dual monopole antennas have dual band, broad bandwidth and omni-directional radiation patterns, as it is the conventional monopole antenna. As one monopole operated a stub to match feed line with antenna, we are obtained easy an ideal impedance matching. It is increased band width of impedance. The antenna bandwidth is about 1350MHz (1.69~2.04[GHz]z]) at 1st resonance frequency, 2,670MHz (4.33~6[GHz]) at 2nd, resonance frequency, and, 3,980MHz (6.1~10.08[GHz]) at 3th resonance frequency on VSWR$$\leq_-$$2, and then we can be got not only 1.75~1.87 [GHz] PCS band but also, UWB band.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.5
• /
• pp.355-359
• /
• 2020

In this study, image analysis and surface roughness measurements using an optical microscope are presented as a method to quantitatively evaluate the results of screen printing. Using this method, the squeegee speed, which is the printing process condition, and the printability of the electrode according to the screen mesh were evaluated. Increasing the squeegee speed in the printing process acts as a process element that increases the line width precision of the printed electrode and lowers the surface roughness of the printed surface. Furthermore, the edge roughness, which indicates the clarity of printing, was not significantly affected by the speed of the squeegee during printing. The print thickness increases in proportion to the squeegee speed, but is largely dependent on the screen thickness.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.105-112
• /
• 2003

Diode rectifier which can't be controlled output voltage and phase control converter as AC/DC converter have low power factor and harmonics of lower order in the line current. In this paper, three phase PWM(Pulse Width Modulation) AC/DC boost converter is studied to solve these problems. The characteristics of a proposed converter are to control the phase of current without current sensor as a very simple control algorithm using circuit parameters only and to apply sinusoidal PWM method with fixed switching frequency due to a difficult design of input filter and switching device. We simulate for the proposed algorithm that high power factor is achieved and DC link voltage has fast dynamic response without ripple in rectifying and regenerating operation. As a result of experiment with circuit parameter(inductor, capacitor) decided in simulation, the proposed converter had high power factor and reduction of low order harmonics as against diode rectifier.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.58-64
• /
• 2016

In this paper presents Robust k-means clustering-based high-speed bar code decoding method to blur and lighting. for fast operation speed and robust decoding to blur, proposed method uses adaptive local threshold binarization methods that calculate threshold value by dividing blur region and a non-blurred region. Also, in order to prevent decoding fail from the noise, decoder based on k-means clustering algorithm is implemented using area data summed pixel width line of the same number of element. Results of simulation using samples taken at various worst case environment, the average success rate of proposed method is 98.47%. it showed the highest decoding success rate among the three comparison programs.