• Journal of the Korean Society of Safety
• /
• v.37 no.4
• /
• pp.20-27
• /
• 2022

This article aims to develop an algorithm that detects fire pump defects by analyzing the current signals of an induction motor, which are triggered by changes in the flow rate and pressure of multistage volute pumps that are used for fire services. The operational status of the pumps was categorized into three: first, normal operation; second, a defect that is caused by a change in the current value; and third, a defect occasioned by a change in current, pressure, and flow rate. When a fire pump was in normal operation, the motor's operating current was measured between 5.06 A and 6.9 A, the flow rate was estimated at 0-0.27 m³/min, and the pressure ranged from 0 to 0.47 MPa. In the event that a defect was caused by an abnormal current value in the motor, it was attributed to the pump's adherence. Furthermore, if there was no source of water, the defect was considered to have been induced by phase-loss operation, no-load operation, or run-stop operation, with the current value of each scenario being measured at > 52.8 A, < 4.13 A, > 45.15 A, and < 3.8 A, respectively, placing its overall range between 0 and 50 A. The sources of defects were detected based on an analysis of the flow rate, pressure, and current, which represent the following causes: air inflow into the casing, inadequate suction of water, and reverse-phase operation, respectively. Each cause entailed the following values: when air seeped into the casing, the pressure was measured at 0.24 MPa irrespective of changes in the flow rate; when there was inadequate suction of water, the pressure was recorded between 0 and 0.05 MPa despite changes in the flow rate; and when the power line's reverse-phase loss was the cause of the defect, the pressure was measured at 0.33 MPa for a flow rate of 0 L/min, and a higher flow rate decreased the pressure to nearly 0 MPa. The results of this study will enable engineers to develop a pump defect detection algorithm that is based on an analysis of current, and this algorithm will facilitate the execution of a program that will control a fire pump defect detection system.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.21 no.1
• /
• pp.11-23
• /
• 2022

The purpose of this study is to develop the Korean New Deal policy in the post-corona era, and furthermore, to provide basic data to discover and present a desirable future educational facility environment-related agenda that will help the successful realization of the policy. In order to achieve the above research purpose, we explored the new paradigm shift for the education new deal in the post-COVID-19 era and the future educational facility environment through Korean and overseas related policies, reports, and source books. And a Delphi survey was conducted on panels of experts in the front-line education field, academia, and industry. As a result, 5 areas were derived as key domains of the educational facility environment in the post-COVID-19 era, and a total of 33 agendas [8 in green, 9 in smart, 9 in spatial innovation, 4 in school facilities complexation, and 3 in others (safety)] were derived. The study findings confirmed that the demand for the smart area and spatial innovation area as the educational facility environment agenda in the post-COVID-19 era was relatively high compared to the green area or school facilities complexation area. Therefore, when establishing educational facility policies in the future, it is necessary to establish customized policies that reflect the demands and needs for the smart area and spatial innovation area, whereas it is necessary to focus more on establishing policies that improve awareness and interest about the green area and school facilities complexation area.

• Animal Bioscience
• /
• v.36 no.4
• /
• pp.619-628
• /
• 2023

Objective: This study aimed to determine and compare the apparent ileal digestibility (AID) and the standardized ileal digestibility (SID) of amino acids (AA) in soybean meal (SBM), cottonseed meal (CSM), and low-gossypol cottonseed meal (LCSM) fed to broiler chickens and laying hens. Methods: Three semi-purified diets containing the identical crude protein concentration at 20% were formulated to contain SBM, CSM, or LCSM as the sole source of N. A N-free diet was also formulated to estimate the basal ileal endogenous losses of AA for broilers and hens. A total of 300 male Ross 308 chicks at one-day-old and 144 Hy-Line Brown laying hens at 30-week-old with initial egg production rate of 88.3%±1.0% were randomly allocated into 1 of 4 dietary treatments, respectively. Results: CSM and LCSM showed more Arg and Cys+Met while less Lys, Ile, Leu, and Thr relative to SBM. Significant interactions existed between species and experimental diets for AID (except for Arg, Asp, Glu, Gly, and Pro) and SID (except for Arg, His, and Phe) of most AA. Most AA in diets showed higher AID (except for Lys) and SID (except for Lys, Met, and Ser) in broilers relative to laying hens. The AID and SID of all AA were significantly different between the three diets. In broilers, the AID and SID of most indispensable AA except for Arg in SBM and LCSM was higher than CSM. In laying hens, the AID and SID of most indispensable AA except for Arg, Met+Cys, and Phe in SBM was higher than CSM and LCSM. Conclusion: The accurate determination of AID and SID of AA in CSM and LCSM for broilers and layers benefits the application of CSM and LCSM in chicken diets. The cottonseed by-products CSM or LCSM showed the species-specific AA digestibility values for broilers and layers.

• Journal of Environmental Health Sciences
• /
• v.49 no.3
• /
• pp.134-148
• /
• 2023

Background: The conducting of health effect surveys (HESs) in environmentally contaminated vulnerable areas (ECVAs) by the central and local governments has been increasing apace with the increase in demand for HESs since the Environmental Health Act was enacted in South Korea in 2008. Objectives: This study aimed to review the HESs of residents in ECVAs conducted in South Korea. Methods: An analysis was performed on 125 reports obtained from the Environment Digital Library, PRISM, and local government websites after selecting from 803 projects obtained as ECVAs from the Korea ON-Line E-Procurement System (1997~2021), National Institute Environment Research (2000~2021), and Korea Environmental Industry and Technology Institute (2009~2021). The reports were classified by background (residents' demand, HES, and more), research design (cross-sectional study, cohort, ecological study, and panel), pollution source (abandoned metal mine (AMM), industrial complex (IC), and more), and assessment method of exposure and health effects. The survey area was converted into administrative district codes for geographical mapping. Results: There were 37, 34, 18, and 10 cases associated with AMM, IC, waste incinerators, and coal-fired power plants, respectively. Most of the studies conducted were cross-sectional studies and ecological studies. The proportion of epidemiological investigations by residents' demand showed an increase from 0.0% to 8.9% for the central government while decreasing from 16.7% to 14.3% for local governments after 2008 compared to before 2008. HESs increased at both the central and local government levels since 2014. For the evaluation method, 365 environmental hazards, 319 health outcomes, and 302 biological markers were investigated, with the most commonly investigated items being metals, cancer, and blood metals. Conclusions: HESs of residents in ECVAs in South Korea have been continuously developed both quantitatively and qualitatively. Future improvements are expected, and systematic review and classification of the HESs is warranted.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3C
• /
• pp.143-155
• /
• 2006

SPT-Uphole tomography method was introduced for the evaluation of near subsurface shear wave velocity (Vs) distribution map. In SPT-Uphole method, SPT (Standard Penetration Test) which is common in geotechnical site investigation was used as a source and several surface geophones in line were used as receivers. Vs distribution map which is the triangular shape around the boring point can be developed by tomography inversion. To obtain the exact travel time information of shear wave component, a procedure using the magnitude summation of vertical and horizontal components was used based on the evaluation of particle motion at the surface. It was verified that proposed method could give reliable Vs distribution map through the numerical study using the FEM (Finite Element Method) model. Finally, SPT-Uphole tomography method was performed at the weathered soil site where several boring data with SPT-N values are available, and the feasibility of proposed method was verified in the field.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.212-215
• /
• 2022

In the era of so-called digital transformation today, the need for the construction and utilization of big data in various fields has increased. Today, a lot of data is produced and stored in a digital device and media-friendly manner, but the production and storage of data for a long time in the past has been dominated by print books. Therefore, the need for Optical Character Recognition (OCR) technology to utilize the vast amount of print books accumulated for a long time as big data was also required in line with the need for big data. In this study, a system for digitizing the structure and content of a document object inside a scanned book image is proposed. The proposal system largely consists of the following three steps. 1) Recognition of area information by document objects (table, equation, picture, text body) in scanned book image. 2) OCR processing for each area of the text body-table-formula module according to recognized document object areas. 3) The processed document informations gather up and returned to the JSON format. The model proposed in this study uses an open-source project that additional learning and improvement. Intelligent OCR proposed as a system in this study showed commercial OCR software-level performance in processing four types of document objects(table, equation, image, text body).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.430-432
• /
• 2022

With the recent increase in interest in the open science movement in science and technology fields such as open access, open data, and open source, the movement to share and utilize publicly funded research products is materializing and revitalizing. In line with this trend, many efforts are being made to establish and revitalize a system for sharing and utilizing research data, which is a key resource for research in Korea. These efforts are mainly focused on collecting research data by field and institution, and linking it with DataON, a national research data platform, to search and utilize it. However, developed countries are building a system that can share and utilize not only such research data but also various types of R&D-related computing resources such as IaaS, PaaS, SaaS, and MLaaS. EOSC (European Open Science Cloud), ARDC (Australian Research Data Commons), and CSTCloud (China S&T Cloud) are representative examples. In Korea, the Korea Research Data Commons (KRDC) is designed and a core framework is being developed to facilitate the sharing of these computing resources. In this study, the necessity, concept, composition, and future plans of KRDC are introduced.

• Korean Journal of Environmental Biology
• /
• v.41 no.3
• /
• pp.247-255
• /
• 2023

The occurrence of sudden strike pest events in urban areas is increasing as global warming intensifies, consequently, re causing harmful impacts. Studies on these incidents are fewer in number and insufficient compared to research on other nuisances such as mosquitoes and flies. Therefore, we conducted a study on the development of a selective collection method, using a filter layer to establish a monitoring system for Ephemera orientalis (Ephemeroptera: Ephemeridae), a species frequently identified as a sudden strike pest. Three sampling points were selected along the Hangang River in Namyangju, where E. orientalis outbreaks occur. Prototypes, consisting of four layers and with a light source attached to attract insects, were installed at each sampling point. Sampling was performed every 30 minutes between 19:00 and 22:30 in the month of June. The filter interval of each layer was adjusted so that the collected mayflies were distributed into specific layers. To evaluate the collection efficiency in line with the materials and the filter intervals, the optimal collection efficiency was investigated by combining two types of layer materials (stainless and acrylic) and filter intervals (1-5 mm). The optimal conditions were as follows: The selective collection efficiency was found to be highest at 96.5% when the interval of the selective target filter was 2.0 mm and there was one upper filter.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.361-365
• /
• 2007

Aero-pulsation noise, generally caused by geometric asymmetry of a rotating device, is one of considerable sources of annoyance in passenger cars using the turbocharged diesel engine. Main source of this noise is the compressor wheel in the turbocharger system, and can be reduced by after-treatment devices such as silencers, but which may increase the manufacturing cost. More effective solution is to improve the geometric symmetry over all, or to control the quality of components by sorting out inferior ones. The latter is more simple and reasonable than the former in view of manufacturing. Thus, an appropriate discrimination method should be needed to evaluate aero-pulsation noise level at the production line. In this paper, we introduce the accurate method which can measure the noise level of aero-pulsation and also present its evaluation criteria. Besides verifying the reliability of a measurement system - a rig test system-, we analyze the correlation between the results from rig tests and those from vehicle tests. The gage R&R method is carried out to check the repeatability of measurements over 25 samples. From the result, we propose the standard specification which can discriminate inferior products from superior ones on the basis of aero-pulsation noise level.

• The Korean Journal of Petroleum Geology
• /
• v.5 no.1_2 s.6
• /
• pp.1-8
• /
• 1997

Seismic stratigraphic analysis of the high resolution profiles obtained from the southeastern shelf of Korea divided the deposits into 4 sequences; 1) sequence D, 2) sequence C, 3) sequence B and 4) sequence A (Holocene sediments). Sequence D was deposited in shallow-water environment at west of the Yangsan Fault as the basin subsided. On the other hand, the eastern part was formed at the slope front. Landward part of the slope-front fill sediments were eroded and redeposited nearby slope due to the syndepositional tilting of the basin. This tilting probably resulted from the continuous closing of the Ulleung Basin. Sequence C is made of stacked successions of the lowstand fluvial sediments, transgressive sediments and marine highstand sediments derived from the paleo-river in the western part of the Yangsan Fault. Sequence C in the eastern part of the Yanshan Fault was formed at the shelf break. Progradation of the lowstand sediments resulted in broadening of the shelf. Sequence C in the eastern part was also tilted but the tilting was weaker than in Sequence D. During the formation of sequence B the tilting stopped and the point source instead of the line source started in both sides of the Yangsan Fault. Sequence B was composed of the highstand systems tract partially preserved around the Yokji island, lowstand systems tract mainly preserved in the Korea Trough and transgressive systems tract. After the stop of the tilting, the force of compression due to the closing of the Ulleung Basin may be released by the strike-slip faults instead of tilting.