• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1271-1278
• /
• 2010

High-speed traction has voltage source variation because the electric power of tractions is supplied by difference traction power system according to operating section. This paper proposes the robust control maintaining constant output performance against voltage source variation for PWM converters of the high speed traction. The proposed scheme consists of feed-forward compensation for current controller by on-line calculating the rms voltage of voltage source. Total dynamic performance of high speed traction can be improved by the reduction of the output voltage ripple which is resulted from voltage source sag and variation. The superior performance and validity of the proposed scheme is proved through the simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 추계학술대회 논문집
• /
• pp.64-69
• /
• 2004

This paper deals with an algorithm for controlling ac output voltage of Z-source inverter using Modified SVPWM (abbreviated as MSVPWM). Unlike the conventional space vector pulse width modulation, MSVPWM has one extra shoot-through zero time $T_{sh}$. During shoot-through zero time, both switches in a leg are conducted simultaneously in order to boost inverter output voltage to any desirable value regardless the line voltage. The algorithm to control linearly the capacitor voltage is suggested to improve the performance of Z-source inverter system. The performance of Z-source inverter using above algorithms is demonstrated in simulation results using PSIM. Index terms-Z-source inverter (ZSI), shoot-through time, three-phase carrier-based PWM, space vector PWM (SVPWM), modified space vector PWM (MSVPWM).

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1182-1184
• /
• 2018

The combination of angular spin momentum with electronics is a promising successor to charge-based electronics. The conduction bands in GaAs may become spin-polarized via optical spin pumping, doping with magnetic ions, or induction of a moment with an external magnetic field. We investigated the spin populations in GaAs with x-ray magnetic circular dichroism for each of these three cases. We find strong anti-symmetric lineshapes at the Ga $L_3$ edge indicating conduction band spin splitting, with differences in line width and amplitude depending on the source of spin polarization.

• 한국음향학회지
• /
• 제22권6호
• /
• pp.482-488
• /
• 2003

선 배열을 이용한 빔 형성시 특정 지향 방향을 기준으로 반대 방향에 동일한 이득을 갖게 되어 수신단에서는 좌/우측 방위구분에 있어 모호성을 갖는다 이에 본 논문에서는 선 배열에 카디오이드 빔을 적용하여 좌/우측 방위 구분의 모호성을 해결하고, 아울러 어레이 합성 처리 기법을 사용하여 음원에 대한 공간적 데이터 수를 증가시키고 음원으로부터 얻은 정보를 코히어런트 합성 처리함으로써 배열 센서가 갖는 공간적인 분해능의 한계를 극복하였다. 시뮬레이션 결과에서는 좌/우측 방위 구분에 대한 성능을 어레이 합성 횟수에 따라 나타내었다.

• Journal of Astronomy and Space Sciences
• /
• 제9권2호
• /
• pp.165-170
• /
• 1992

$\zeta$ Aur형의 쌍성계인 32 Cyg 에 대해 복사 전달 방정식을 수치적분하여 이론적인 선 윤곽을 구하였다. 원천함수를 구하기 위해 2 준위 원자와 완전 재분배를 가정 하고 Sobolev 근사를 이용하였다. 선 윤곽을 궤도위상에 따라 구한 결과, 공전궤도 위상 0.99에서는 선 윤곽이 적색편이를 보였으며, 공전궤도 위상 0.70에서는 파장이 짧은 쪽으로 약간 치우쳤다. 또한 궤도면 기울기에 따른 효과를 보기 위해 같은 위상에서 각기 다른 기울기를 주고 계산하였는데, 기울기가 작은 경우에 빛의 세기가 증가하였다.

• Journal of Welding and Joining
• /
• 제29권2호
• /
• pp.40-45
• /
• 2011

The purpose of this study is to establish the optimum line heating condition to straighten the excessive bending distortion of a thin plate welded structure. For it, the extensive FEA and experiments were performed to evaluate the effect of heat source, heating speed and position on the straightening of a thin plate welded structure. In accordance with the results obtained by FEA and experiments, the straightening effect of line heating was strongly depends on the variables used in this study. With the results, the optimum line heating condition was established by using the response surface method and verified through comparing it with the numerical analysis result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.731-734
• /
• 2003

In present, most of metallic structures(gas pipeline, oil pipeline, water pipeline, etc) are running parallel with subway and power line in seoul. Moreover subway system and power line make a stray current due to electrical corrosion on metallic structures. The owner of metallic structures has a burden of responsibility for the protection of corrosion and the prevention against big accident such as gas explosion or soil pollution and so on. So, they have to measure and analyze the data about P/S(Pipe to Soil) potential, amplitude of stray current, point of source of stray current and so. In this paper, results of development about data logger apparatus for measurement stray current of subway and power line are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1033-1036
• /
• 2002

This paper introduces a control method of series active power filter that compensate harmonic currents and eliminate a neutral line current in 3 phase 3 wire and 3 phase 4 wire power system with harmonic voltage source. These harmonic currents and neutral line current are caused by a nonlinear loads such as diode rectifiers and thyristor converters. Proposed methode extracts a voltage reference directly from performance function without phase transformation. Therefore, the control method is simpler than any other conventional methods. Experimental results for 3-phase 3-wire and 3-phase 4-wire series active power filter system were shown to verify the effectiveness of this control method.

• ETRI Journal
• /
• 제34권6호
• /
• pp.978-981
• /
• 2012

We present an analytic solution to the projector pose estimation problem for the pinhole projection model in which the source image is a centered rectangle with an unknown aspect ratio. From a single quadrilateral given as a target image, our solution gives the position and orientation of a projector as well as the aspect ratio of a source image. The proposed method decomposes the problem into two pose estimation problems of coupled line projectors aligned at each diagonal of the given quadrilateral and then computes the common solution that satisfies the relevant geometric constraints. The solution is formulated as simple analytic equations. We also provide a determinant of projectability of an arbitrary quadrilateral.

• 제어로봇시스템학회논문지
• /
• 제10권3호
• /
• pp.239-248
• /
• 2004

Optical coherence tomography(OCT) is high resolution imaging system which can see the cross section of microscopic organs in the living tissue. In this paper, we analyze the relation between the light source and the resolution of modulated signal in Michelson interferometer. We construct 1-D OCT signal processing hardware such as amplifiers, filters, and demodulate electronic signals from the photo detector. In order to get 2-D OCT image, the synchronization among optical delay line, sample stage and A/D converter is dealt with. In experiments, we verify analog and digital signal processing blocks which apply to the stacks of glasses. Finally we aquire high resolution 2-D OCT image with respect to the onion tissue. We expect that this result can be applied to the medical instrument through performance improvement.