• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2271-2273
• /
• 2003

Control Rod Control System(CRCS) is to control nuclear reaction of reactor by moving Control Rod Drive Mechanism(CRDM) with speed and direction signal from Reactor Regulating System(RRS). CRCS is made up of two parts : control cabinet and power cabinet. And this paper presents mainly power cabinet design for system reliability. To increase reliability of power cabinet, controller, power supply and communication line arc doubly designed and supervision and diagnosis function are applied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3714-3721
• /
• 2015

Although sheath-type heating line is generally used for susceptor heater, performance deterioration problems in temperature uniformity occurs in the case of large scale and high temperature condition. We developed new design and prototype of the susceptor using sheet metal to provide performance improvement in temperature uniformity. Temperature uniformity below 1.4% in the surface temperature condition of $450^{\circ}C$ was verified in the susceptor prototype. Also we developed Kernel regression algorithm to estimate measured temperature using temperature learning data. The reliability of the measured temperature uniformity was confirmed by comparative analysis between predicted data and measured data.

• Journal of Fashion Business
• /
• v.23 no.5
• /
• pp.111-123
• /
• 2019

The objective of this study is to provide basic marketing data that is useful for domestic cosmetics companies by investigating purchase decision factors in cosmetics shopping. To this end, a mobile survey was conducted with a total of 300 men and women, aged 20-30, residing in Seoul and the surrounding Gyeonggi province. The collected data was analyzed by using SPSSWIN 21.0. Next, frequency analysis, factor analysis, reliability analysis, descriptive statistical analysis, correlation analysis and multiple regression analysis were performed. The results outlined consumer's purchase decision factors and suggest retailers should focus on services, such as additional events and samples, convenience of the shop itself, training salespeople to be kind and informative, promotion and services by carefully choosing models and celebrities to advertise and encourage impulse purchases, increasing product quality, improving their reputation in SNS, improve the perceived reliability of the shop by stocking famous brands prominently, advertisement, promotion and being reliably trendy and being reliably trendy. However, product loyalty was not an important factor consumers aged 20-30, these people are using SNS a lot so buy a wide variety of products. In this way, the cosmetics companies should establish marketing strategies in line with consumer habits.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.343-353
• /
• 2020

Based on the Precise Transfer Matrix Method (PTMM), the dynamic model is constructed to observe the vibration behaviour of cylindrical shells with variable thickness by solving a set of first-order differential equations. The free vibration of stiffened cylindrical shells with variable thickness can be obtained to compare with the exact solution and FEM results. The reliability of the present method of free vibration is well proved. Furthermore, the effect of thickness on the vibration responses of the cylindrical shell is also discussed. The acoustic response of immersed cylindrical shells is analyzed by a Pluralized Wave Superposition Method (PWSM). The sound pressure coefficient can be gained by collocating points along the meridian line to satisfy the Neumann boundary condition. The mode convergence analysis of the cylindrical shell is carried out to guarantee calculation precision. Also, the reliability of the present method on sound radiation is verified by comparing with experimental results and numerical results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2359-2368
• /
• 2013

In this paper, an IRD (internal read data) circuit preventing the reentry into the read mode while keeping the read-out DOUT datum at power-up even if noise such as glitches occurs at signal ports such as an input signal port RD (read) when a power IC is on, is proposed. Also, a pulsed WL (word line) driving method is used to prevent a DC current of several tens of micro amperes from flowing into the read transistor of a differential paired eFuse OTP cell. Thus, reliability is secured by preventing non-blown eFuse links from being blown by the EM (electro-migration). Furthermore, a compared output between a programmed datum and a read-out datum is outputted to the PFb (pass fail bar) pin while performing a sensing margin test with a variable pull-up load in consideration of resistance variation of a programmed eFuse in the program-verify-read mode. The layout size of the 8-bit eFuse OTP IP with a $0.18{\mu}m$ process is $189.625{\mu}m{\times}138.850{\mu}m(=0.0263mm^2)$.

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.3-20
• /
• 1995

Development of Real-Time Quality Evaluation of Friction Welding by Acousitc Emission : Report 1 ABSTRACT : According as the friction welding has been increasingly applied in manufacturing various machine components because of its significant economic and technical advantages, one of the important concerns is the reliable quality monitoring method for a good weld quality with both joint strength and toughness in the process of its production. However no reliable nondestructive test method is available at present to determine the weld quality particularly in process of production. So this paper presents an experimental examination and quantitative analysis for the real-time evaluation of friction weld quality by acoustic emission, as a new approach which attempts finally to develop an on-line quality monitoring system design for friction welds using AE techniques. As one of the important results, it was confirmed, through this study, that AE techniques can be reliably applied to evaluating the friction weld qualify with 100% joint strength, as the cumulative AE counts occurring during welding period were quantitatively correlated with reliability at 95% confidence level to the joint strength of welds. Real-Time Evaluation of Automatic Production Quality Control for Friction Welding Machine : Report 2 Abstract : Both in-process quality control and high reliability of the weld is one of the major concerns in applying friction welding to the economical and qualified mass-production. No reliable nondestructive monitoring method is available at present to determine the real-time evaluation of automatic production quality control for friction welding machine. This paper, so that, presents the experimental examinations and statistical quantitative analysis of the correlation between the initial cumulative counts of acoustic emission(AE) occurring during plastic deformation period of the welding and the tensile strength of the welded joints as well as the various welding variables, as a new approach which attempts finally to develop an on-line (or real-time) quality monitoring system and a program for the process of real-time friction welding quality evaluation by initial AE cumulative counts. As one of the important results, it was well confirmed that the initial AE cumulative counts were quantitatively and cubically correlated with reliability of 95% confidence level to the joint strength of the welds, bar-to-bar (SCM4 to SUM31, SCM4 to SUM24L) and that an AE technique using initial AE counts can be reliably applied to real-time strength evaluation of the welded joints, and that such a program of the system was well developed resulting in practical possibility of real-time quality control more than 100% joint efficiency showing good weld with no micro-structural defects.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.620-627
• /
• 2004

As h-bridge multilevel inverter is connected with series of single phase power cell, so it obtain high voltage using low voltage power semi-conductor and output voltage similar to sine wave. In this topology, the number of power cell increases in proportion to the output voltage level. Therefore, there are drawbacks that are responsibility against operating ability of main controller and signal wire increase. However, we can overcome this problems by the substitution of serial communication for the PWM signal in power cell control. Additionally, it has merits of reliability and maintenance. This paper deals with the synchronization and phase-shift method of power cell PWM using CAN(Controller Area Network) communication interrupt in H-bridge multilevel inverter. The advantages of proposed method are signal-line simplification using serial communication between main controller and cell controller, burden reduction in main controller, modularization of power cell, easy protection of each power cell, expandability improvement and reliability increase of control signal and power cell. This paper establishes propriety and reliability of proposed method through experiment of 13-level H-bridge multilevel inverter.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.21 no.4
• /
• pp.278-288
• /
• 2018

Purpose: Dehydration is a paediatric medical emergency but there is no single standard parameter to evaluate it at the emergency department. Our aim was to evaluate the reliability and validity of capillary refilling time as a triage parameter to assess dehydration in children. Methods: This was a prospective pilot cohort study of children who presented to two paediatric emergency departments in Italy, with symptoms of dehydration. Reliability was assessed by comparing the triage nurse's measurements with those obtained by the physician. Validity was demonstrated by using 6 parameters suggestive of dehydration. Comparison between refilling time (RT) and a validated Clinical Dehydration Score (CDS) was also considered. The scale's discriminative ability was evaluated for the outcome of starting intravenous rehydration therapy by using a receiver operating characteristic (ROC) curve. Results: Participants were 242 children. All nurses found easy to elicit the RT after being trained. Interobserver reliability was fair, with a Cohen's kappa of 0.56 (95% confidence interval [CI], 0.41 to 0.70). There was a significant correlation between RT and weight loss percentage (r-squared=-0.27; 95% CI, -0.47 to -0.04). The scale's discriminative ability yielded an area under the ROC curve (AUC) of 0.65 (95% CI, 0.57 to 0.73). We found a similarity between RT AUC and CDS-scale AUC matching the two ROC curves. Conclusion: The study showed that RT represents a fast and handy tool to recognize dehydrated children who need a prompt rehydration and may be introduced in the triage line-up.

• Journal of Digital Convergence
• /
• v.18 no.4
• /
• pp.237-242
• /
• 2020

Online e-commerce management systems are gradually increasing, and transactions are made in various items. However, the reliability between sellers and buyers is very important in high-priced transactions such as automobiles when used transactions online. Nevertheless, in the existing used trading system, a device that prevents fraud or trusts the seller is insufficient. This paper developed a blockchain-based used transaction management system to improve the reliability that occurs during used transactions. We have improved the safety trading system by developing a trading management system for used cars with the highest amount of used cars in various fields. This system uses Ethereum-based smart contract to guarantee reliability without third party intervention. By designing the contracts required for used car trading by utilizing smart contracts, it was possible to reduce the effort and time of trading participants in the existing used car transactions, while enabling safe transactions. In addition, this system mitigated information asymmetry between buyers and sellers, and reduced and prevented brokerage fees in the distribution process without third parties.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.143-148
• /
• 2013

When the fault occurs in power system, the fault-current exceeds breaking capacity of the circuit breaker. So, reliablity of the power system is decreased sharply. Superconducting fault-current limiter (SFCL) is operated without impedance in normal state. The fault-current is limited by its impedance during the fault condition. However, the SFCL has several weak points such as huge size, high-price, liquid-nitrogen operation for the real power system. In this paper, We suggested the high-speed interrupter to limit the fault-current in case of the single line-to-ground fault. In addition, we compared the high-speed interrupter with the SFCL to ensure the operation reliability. The proposed interrupter detected the fault-current through the CT, and the power was supplied by operation of the SCR control system. In this experiment, the power of high-speed interrupter was applied after the 4.8[msec] from fault instant. The on-off operation of the interrupter was started after half-cycle from the fault. The fault-current was flowed into the impedance element by the switching operation of the high-speed interrupter. So, the fault current was limited within one cycle, and then it didnt exceed the capacity of a circuit breaker. We confirmed that there was slight difference between the SFCL with high-speed interrupter in terms of limiting-time of the fault-current and switching speed of the SCR. The high-speed interrupter was considered to be more efficient than the SFCL in size, cost or reliability.