• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.8
• /
• pp.39-47
• /
• 1999

This paper describes on-line retrainable RBF network in order to control the coiling temperature for a hot coil strip at Pohang Iron & Steel Company(POSCO). The proposed neural network can be used for improving conventional rule-based lookup table, which generates a heat transmission coefficient. To cope with time-varying characteristics of hot coil process, additional synaptic weights for on-line retraining purposes are introduced to hidden-to-output weights of conventional RBF network. Those weights are locally adjusted to newly incoming test data while preserving old information trained with off-line past data. Hence the effect of catastrophic interference can be greatly alleviated with the proposed network. In addition, rejection scheme is introduced for reliability concerns. From the experimental results applied to the actual process, it is noticed that overall control performance represents about 2.2% increase compared to the conventional one.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.931-939
• /
• 2013

In this paper, we try to find the lifting-line method which is applicable to the conceptual design of aircraft wings, and analyze the accuracy and coverage of the method. Two methods that are extended from the lifting-line theory of Prandtl are selected. One of the methods is Weissinger's method which imposes the velocity boundary condition at the control points located at the quarter chord, and the other is Phillips's method which combines the three-dimensional vortex lifting law. Calculations are performed for an elliptic wing, a swept back wing, and a tapered unswept wing with dihedral angle and geometric twist. The aerodynamic data of the potential flow such as spanwise distributions of circulation and downwash, lift and induced drag are obtained through calculations, and these data are compared with theoretical results and wind tunnel test data. As a result, Weissinger's method showed good accuracy and reliability regardless of wing shapes, but Phillips's method revealed inaccurate results for a swept back wing.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.73.2-73.2
• /
• 2011

We present a new database of absorption and emission-line measurements based on the entire spectral atlas from the Sloan Digital Sky Survey (SDSS) 7th data release of galaxies within a redshift of 0.2. Our work makes use of the publicly available penalized pixel-fitting(pPXF) and gas and absorption line fitting (gandalf) IDL codes, aiming to improve the existing measurements for stellar kinematics, the strength of various absorption-line features, and the flux and width of the emissions from different species of ionized gas. Our fit to the stellar continuum uses both standard stellar population models and empirical templates obtained by combining a large number of stellar spectra in order to fit a subsample of high-quality SDSS spectra for quiescent galaxies. Furthermore, our fit to the nebular spectrum includes an exhaustive list of both recombination and forbidden lines. Foreground Galactic extinction is implicitly treated in our models, whereas reddening in the SDSS galaxies is included in the form of a simple dust screen component affecting the entire spectrum that is accompanied by a second reddening component affecting only the ionised gas emission. Most notable of our work is that, we provide quality of the fit to assess reliability of the measurements. The quality assessment can be highly effective for finding new classes of objects. For example, based on the quality assessment around the Ha and [NII] nebular lines, we found approximately 1% of the SDSS spectra which classified as "galaxies" by the SDSS pipeline are in fact type I Seyfert AGN.

• Korean Parent-Child Health Journal
• /
• v.5 no.1
• /
• pp.38-49
• /
• 2002

The purpose of this study was to investigate the needs of a mother when getting the information from the child care web sites. The subjects of this study were collected through on-line and off-line and constituted of 157 mothers who had neonates and infancy. All the mothers could use the internet. On-line subjects were 135 mothers who were the members of "Child Rearing" circle of internet portal site, Daum (www.daum.net) and off-line subjects were 22 mothers who visited the pediatric outpatient department. The instrument had 15 items about needs for information of the child care web sites. 12 items were multiple choice-questions and 3 items were open questions. In data analysis, SPSSWIN 10.0 program was utilized for descriptive statistics. The results were as follows. 1. The most useful web content that mothers represented was food and nutrition(24.4%) and the other rated as following order; growth and development(21.1%), supports among parents(16.8%). 2. The most great web problem that mothers represented was depth of content(43 people) and the other rated as following order; objectivity, specialty and reliability of content(29 people), no problems (23 people), too much advertisements(17 people), obligation on member(4 people). 3. Mothers represented the highest information needs about play and education(65 people) and the other rated as following order; nutrition(44 people), managements of common health problems(39 people), experiences of other parents(10 people), child caring methods (38 people), exchanges of things(7 people). 4. Mothers represented the highest consultation needs about common health problem (62 people) and the other rated as following order; growth and activity(60 people), play and education(30 people), nutrition(22 people), child caring methods(9 people).

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.467-470
• /
• 2006

Superconducting fault current(SFCLs) are expected to improve not only reliability but also stability of real power systems. The analysis on the single line-to-ground fault current of the integrated three phase flux-lock type SFCL, which consists of three flux-lock reactor wound on an iron core in each single phase and three YBCO thin films, was investigated in current limiting operating characteristics. We compared additive polarity winding with the subtractive one in the flux lock reactor. Its turns ratio each phase between the primary and the secondary coils is 63:42. When a single line-to-ground fault occurred in any phase, the peak value of line current in the fault phase of the additive polarity winding increased up to 31.44[A] during first-half cycle. On the other hand, the peak value in the subtractive polarity winding increased up to 81.77[A] under the same conditions. This is because the current flow between the primary and the secondary windings becomes to be additive or subtractive in each winding direction. We confirmed that the current limiting behavior in the additive polarity winding was more effective for a single-line-to ground fault.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.809-812
• /
• 2006

This paper describes about the vision system, which was developed for the recognition of material management characters in the slab processing line. The material management characters, which are marked at the surface of a slab, are recognized by real time processing before slab moves to the next hot strip line. The vision system for the character recognition include that CCD camera system which acquire slab image, image transmission system which transmit captured image to the long distance, I/O devices for the interface with peripheral control system. We have installed vision system to the slab processing line and tested. Through the testing, we have checked durability, reliability and recognition rate of our system. In the results, we have confirmed that our system have good performance and higher recognition ability.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.9-17
• /
• 2021

In this paper, we propose a reversely using the "Man In The Middle Attack" attack technique as a way to introduce network security without changing the physical structure and configuration of the existing network, a Virtual Network Overlay is formed with only a single Ethernet Interface. Implementing In-line mode to protect the network from external attacks, we propose an integrated control method through a micro network security sensor and cloud service. As a result of the experiment, it was possible to implement a logical In-line mode by forming a Virtual Network Overlay with only a single Ethernet Interface, and to implement Network IDS/IPS, Anti-Virus, Network Access Control, Firewall, etc.,. It was possible to perform integrated monitor and control in the service. The proposed system in this paper is helpful for small and medium-sized enterprises that expect high-performance network security at low cost, and can provide a network security environment with safety and reliability in the field of IoT and embedded systems.

• The Research Journal of the Costume Culture
• /
• v.31 no.5
• /
• pp.640-650
• /
• 2023

This study aimed to suggest a suitable collar pattern by visually evaluating the appearance of the amount of collar drape by the starting position of the lapel line of a double-breasted tailored jacket using a 3d virtual fitting program. It created an avatar based on the mean size of women in their 20s (the 8th Size Korea) using clo network (double fastening: 10cm, collar width: 4.5cm, collar stand: 3cm, and lapel width: 8.5cm). The starting of the lapel twist line was waistline level, the 1/2 level of bustline and waistline, or bustline level, and collar laying amount was 4.5, 5.5, 6.5, or 7.5cm. It was evaluated by garment construction experts using 5, 6, and 4 items on the front, sides, and back, respectively. Descriptive statistics, F-test, Duncan-test, and reliability analysis were conducted using SPSS 22. When collar laying amount was 6.5cm, it was best rated regardless of the starting point. Under waist line, when collar laying amount was 6.5cm, it was best rated regardless of the starting point. When collar laying amount was large, the collar's outline length increased, resulting in unnecessary wrinkles from the neckline to the lapel, affecting the overall collar appearance. When collar laying amount was the smallest, the collar was lifted and the width was narrowed, exposing the seam connecting the collar and neckline. The length of the collar's outline varied depending on collar laying amount, which was important to make the outline sit comfortably on the body.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.269-269
• /
• 2001

Maintainability refers to the ease with which maintenance work can be done. It involves the process of ensuring that products can be easily and safely maintained and that the maintenance support requirement is minimized. When a product has a reasonably long life, the cost of operation and support during that life can greatly exceed the initial capital cost. The value to the customer of optimizing maintainability should be evident. Some effort and expense applied to achieving a product which can be easily and cheaply maintained will make very significant savings in the life cycle costs. In this paper, the International Standard IEC 60300-3-10, which is the application guide for maintainability, is considered. This standard can be used to implement a maintainability program covering the initiation, development and in-service phases of a product. It provides guidance on how the maintenance aspects of the tasks should be considered in order to achieve optimum maintainability. The elements of a maintainability program, which are maintenance policy and concept, maintainability studies, project management, design for maintainability, analysis and prediction methods, maintenance verification and validation, analysis of life cycle cost, maintenance support planning, and collection and analysis of maintenance data, are fully discussed in this paper.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.17-19
• /
• 2017

The first version of the AKARI far-infrared All-Sky Bright Source Catalogue (BSC ver.1) was released to public in March 2010. It has been widely used for various astrophysical researches. We are continuing efforts to produce the next edition. The new version is expected to be improved in accuracy and reliability, as well as its volume. Many improvements to the next version are in progress. The time-line signal is being re-examined throughout the entire data processing. Correction processes for signal linearity and detector responsivity, and procedure for masking signal anomaly are revised. The source extraction process is further tuned and operating parameters will be optimized. These bring better reliability of the source detection and possibly an increase of source numbers. The position accuracy is expected to be improved. Systematic position error seen around the Galactic plane will also be corrected. We also plan to deliver the Faint Source Catalogue version 1.