• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.489-492
• /
• 2005

As a former level of MSC(Multi Spectral Camera) telescope of the KOMPSA T2satellite, the several performance tests of EOS(Electro Optical Subsystem) were performed in the EOS level. By these tests, not only the design requirement of payload can be verified but also the test result can be the important criterion to estimate the performance of payload in the launch and space orbit environment. The EOS Geometric Mapping test is to verify the accuracy of the alignment & assembly on the Subsystem of the MSC by measurement like these; LOS(Line of Sight), LOD(Line of Detector), Band to Band Registration, Optical Distortion and Reference Cube. This paper describes the test results and the analysis for the EOS Geometric Mapping.

• Journal of the Korean Home Economics Association
• /
• v.35 no.1
• /
• pp.307-318
• /
• 1997

The purpose of this study is to survey differences of visual effects for location the york line. According to three types of body shapes(average, small & thin small & fat)for location of the york line We investigated the visual effects and optical illusion by slider and the results of data which analized by anova and duncan's multiple rannge are as follows. 1. In the A.V (average) body shapes design D1 was showed D1 was showed to be most remarkable in terms of optical illusion and design D2 was showed to be prefer in terms of visual sight. 2. In the S.T(small& thin) body shapes design D1 was showed to be most remarkable in terms of optical illusion but from the side view of looking thinness design D4 was showed to be nogative and from preference of visual sight design D4 was showed to be most negative. 3. In the S.F(small& fot) body shapes design D1 was showed to be most remarkable in terms of optical illusion and design D3 gained the bettle of superiority from the side view of looking tallness and design D3 was showed to be most negative in terms of the preference of visual sight.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2073-2082
• /
• 2010

The 4-th generation of mobile communication aims to realize global, fast and mobile communication service. The satellite communication charges a key role in this field. In this study, an OTM(On-The-Move) antenna which is mounted on ground vehicles and is used for mobile communication between vehicle and satellite was addressed. Since vehicles move during communication, active antenna line-of-sight stabilization is a core technology to guarantee high satellite communication quality. Stabilization of a satellite tracking antenna which consists of 2-DOF gimbals, an elevation gimbal over an azimuth gimbal, was considered in this study. Various disturbance torques such as static and dynamic mass imbalance torques, variation of moment of inertia according to elevation angle, friction torque related to vehicle motion, equivalent disturbance torque due to antenna roll motion, etc. were analyzed. As a robust stabilization control, rate feedback with sliding mode control and position feedback with proportional+integral control was suggested. To compensate antenna roll motion, a supplementary roll rate feed forward control was included beside of the feedback control loop. The feasibility of the analysis and the proposed control design were verified along with some simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.614-619
• /
• 2004

The line-of-sight (LOS) stabilization system is a precision electro-mechanical gimbals assembly for rejecting vibration to isolate the load from its environment and point toward the target in a desired direction. This paper describes the design of gimbals system to reject the disturbance and to improve stabilization. To generate movement commands for the actuators in the stabilization system, the control system uses a sensor of angular rotation. The controller is a DSP with transducer and actuator interfaces. Unknown parameters of the gimbals are estimated using the signal compression method. The cross-correlation coefficient between the impulse response from the assumed model and the one from model of the gimbals is used to obtain the better estimation. And SMCPE (sliding mode control with perturbation estimation) is used to control the gimbals. SMCPE provides robustness of the control against the modeling deficiencies and unknown disturbances. In order to compare the performance of SMCPE with the classical SMC, a sample test result is presented.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.65-69
• /
• 2005

The theoretical propagation modes of radio waves in the area of Line of Sight(LOS) within Fresnel zone are searched for the available detection ranges in a Marine RFID (Radio Frequency Identification). The structural LOS model to Earth's curvature is proposed and, the calculation method of horizontal distance in a specific radio frequency is also considered in this work As studying results, it is found that the height of antenna to cover the detection ranges and the influences of detection ranges by weather environments can be analyse with the theoretical methods.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.3
• /
• pp.323-330
• /
• 2016

This paper describes real-time unbalance moment compensation method for line of sight(LOS) stabilization control systems. The factors of system inertia, frictions and unbalance moment affect the control accuracy of drive systems that are equipped to on the move(OTM) platforms requiring LOS stabilization function. In case of the unbalance moment among those factors is continuously changed as variation of relative angle between gravity vector and drive torque vector. Then, consideration of the effect in real-time is very complicate. Therefore, its effect should be designed to be minimized, however, designing it almost zero is impossible in real condition. In other words, it is hard to achieve target performance overcoming stability issue of highly unbalanced systems. To solve these problems, this paper proposes calculation method of unbalance moment by using measured sensor data for LOS stabilization control and its use for control compensation. Also, kinematical converting process and control structure for compensation are explained. The effectiveness of the proposed method as variation of unbalance moment is verified under simulation circumstance modeled by assuming LOS control system with 2-axis gimbal structure.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.4
• /
• pp.446-456
• /
• 2024

This paper addresses a novel approach to performance enhancement of the naval gun fire control system(FCS) by using the projectile tracking filter without any distortion of radar measurements. Under the assumption that the maneuvering between the projectile and the ship equipped with the radar is not quite large, this method is based on the concept of polar-coordinate target tracking, which separates the range estimation filter and the direction cosine estimation filter. Note that using polar-coordinates allows tracking to be performed in the same coordinate system from which the radar line-of-sight(LOS) measurements are obtained, unlike the conventional tracking process in Cartesian. Also, it is easy to implement in real-time and guarantees consistent estimates due to its linear filter structure. With the help of the above method, therefore, the proposed filter is able to improve the overall performance of FCS which requires stability of projectile estimates within a short engagement time. The effectiveness of the presented scheme is validated through computer simulations.

• Journal of Korea Multimedia Society
• /
• v.21 no.5
• /
• pp.583-591
• /
• 2018

With the development of ICT(Information and Communication Technology), the number of smart devices is rapidly increasing. LBS(Location Based Service) applications that provide user's location based service are used in various fields. There is also a growing demand for indoor precision positioning technology to provide seamless services. In this paper, we propose an indoor positioning system that estimates the location of a smartphone user. The proposed algorithm determines whether the received signal is LOS(Line-of-Sight) or NLOS(Non-Line of-Sight) in order to decrease multipath effect by the indoor environment. The proposed positioning algorithm is very simple and requires only the AP(Access Point) coordinates. In addition, it requires only two APs for estimating the location of a smartphone user. The proposed algorithm is a practically applicable technology without any additional hardware and kernel modification in the smartphone. In the experiment results, the reliability of the positioning system was found to be within 0.83 m.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.10
• /
• pp.951-959
• /
• 2011

In this study, an OTM(on-the-move) antenna which is mounted on ground vehicles and is used for mobile communication between vehicle and satellite while moving was addressed. Since LOS(line-of-sight) of antenna should direct satellite consistently while vehicle moving to guarantee high satellite communication quality, active antenna LOS stabilization is a core technology for OTM antenna. Stabilization of a satellite tracking antenna which consists of 2-DOF gimbals, an elevation gimbal over an azimuth gimbal, was considered in this study. In consideration of driving mechanism which consists of gear train and flexible driving shafts, a two-mass-system dynamic model coupled with vehicle motion was presented. An internal PI-control loop + outer PI-control loop structure has been suggested in order to damp the torsional vibration and stabilize control system. The classical pole-placement method was applied to design control gains. In addition, a vehicle motion compensation control beside of the feedback control loop has been suggested to improve LOS stabilization performances. The feasibility of the proposed control design was verified along with some experimental results.

• Korean Journal of Optics and Photonics
• /
• v.30 no.6
• /
• pp.230-236
• /
• 2019

We propose and demonstrate a searching and autoalignment method for indoor optical wireless communication, using a cost-effective retroreflective sheet and a microelectromechanical system (MEMS) mirror. We use an extremum-seeking method for a single axis and beam steering with a MEMS mirror to maintain a line of sight (LOS) with the optical link. This autoalignment method shows a receiver sensitivity of -31.87 dBm for a bit rate of 2.5 Gb/s over a 7 m communication link.