• Tunnel and Underground Space
• /
• v.15 no.3 s.56
• /
• pp.223-227
• /
• 2005

The physical and mechanical properties of volcanic glass, which is distributed in the Samho area, South Korea were studied. Laboratory rock tests were carried out in order to obtain the various properties of rocks. Specific gravity, water content, absorption, porosity and wave velocity were measured for the physical properties. Uniaxial and triaxial compressive tests, Brazilian test and point load test were also performed for the mechanical properties. The tests of volcanic glass revealed that the apparent specific gravity, water content and absorption were 2.28, $1.67\%$ and $1.72\%$, respectively. Porosity $(3.87\%)$ was lower, whereas P-wave velocity (5330m/s) and S-wave velocity (2980 m/s) were relatively higher. Brazilian tensile strength ot 7.2MPa, and point load strength of 2.6MPa were among the mechanical properties of the rock. Uniaxial compressive strength (62.4MPa) estimated ken point load strength was very closed to the value (66.0MPa) from the uniaxial compressive test. Young's modulus and Poisson's ratio were E=43.2 GPa and v=0.28, respectively. Drawing the tangent line to Mohr-Coulomb failure criterion showed the cohesion of 20.1MPa and internal fraction angle of $28.6^{\circ}$.

• Korean Journal of Remote Sensing
• /
• v.38 no.2
• /
• pp.139-151
• /
• 2022

SAGD (Steam-Assisted Gravity Drainage) method is widely used for oil recovery in oil sands regions. The SAGD operation causes surface displacement, which can affect the stability of oil recovery plants and trigger various geological disasters. Therefore, it isimportant to monitor the surface displacement due to SAGD in the oil sands region. In this study, the surface displacement due to SAGD operations of the Athabasca oil sands region in Alberta, Canada, was observed by applying Permanent Scatterer Interferometric Synthetic Aperture Radar (PSInSAR) technique to the Sentinel-1 time series SAR data acquired from 2016 to 2021. We also investigated the construction and expansion of SAGD facilitiesfrom Landsat-7/8 time seriesimages, from which the characteristics of the surface displacement according to the oil production activity of SAGD were analyzed. Uplift rates of 0.3-2.5 cm/yr in the direction of line of sight were observed over the SAGDs and their vicinity, whereas subsidence rates of -0.3--0.6 cm/yr were observed in areas more than several kilometers away from the SAGDs and not affected by oil recovery activities. Through the analysis of Landsat-7/8 images, we could confirm that the SAGDs operating after 2012 and showing high oil production activity caused uplift rates greater than 1.6 cm/yr due to the subsurface steam injection. Meanwhile, very small uplift rates of several mm per year occurred over SAGDs which have been operated for a longer period of time and show relatively low oil production activity. This was probably due to the compression of reservoir sandstone due to continuous oil recovery. The subsidence observed in areas except for the SAGDs and their vicinity estimated to be a gradual land subsidence caused by melting of the permafrost. Considering the subsidence, it was expected that the uplift due to SAGD operation would be greater than that observed by the PSInSAR. The results of this study confirm that the PSInSAR can be used as an effective means for evaluating productivity and stability of SAGD in the extreme cold regions.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.3
• /
• pp.160-173
• /
• 2012

Roofing tile research conducted in Korea so far is mostly related to studies on roofing tile patterns excavation report on the roof tile klin site in the aspects of archeology architecture and history of art. There have been continuous studies on kiln ground and manufacture techniques of roofing tiles. However it is difficult to find roofing tiles research based on scientific experiments. The research on this paper performs physical and chemical experimental study to understand order, manufacturing techniques and other characteristics of Chosun Dynasty roofing tiles excavated in Dongdaemun stadium. As for physical experimental study water absorption, specific gravity, whole-rock Magnetic susceptibility rate and Differential Thermal Analysis are conducted. As for chemical experimental study, neutron activation analysis(NAA), microstructure observation, X-ray diffractometry(XRD) analysis are conducted. Result of neutron activation analysis and statistical analysis on piece of roof tile 22 samples clearly show that the roofing tile samples are from different time line and places. It also shows different composition when compare average value of rare earth resources per findspots. It means roofing tiles were manufactured from clay mineral from several places. Close inspection using XRD and polarization microscope reveals that main components of roofing tiles are quartz and felspar. Mica and Illite are found partially. XRD analysis shows mullite mineral composition which occurs when roofing tile is calcined around $1000^{\circ}C$. Differential thermal analysis shows gradual exothermic peak near $900^{\circ}C$. Based on these results, it is assumed that roofing tile is made at $900{\sim}1000^{\circ}C$. result of XRD analysis shows mullite were made near $1000^{\circ}C$. in Differential Thermal Analysis shows gradual exothermic peak near $900^{\circ}C$. this results shows that roof tiles were made near 900~1000 near $1000^{\circ}C$ mean value of whole-rock Magnetic susceptibility rate. When performed comparative analysis using whole-rock Magnetic susceptibility rate average value, findspots provided no certain classification to arrange. Nonetheless low whole-rock Magnetic susceptibility rate 0.2~0.78(${\times}103$ SI unit) is found when roofing tile patterns are Pasangmun, Taesangmun, Eosangmun, Kyukjamun, Heongsunmun. Overall absorptivity is 14~21%. It is similar to 14~18% of roofing tile from Chosun Dynasty. There is only 1.4~2.5g/cm3 of roof tile sample specific gravity. The analysis finds no difference in specific gravity by findspots.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.68.1-68.1
• /
• 2019

Turbulence plays a crucial role in controlling star formation as it produces density fluctuation as well as non-thermal pressure against gravity. Therefore, turbulence controls the mode and tempo of star formation. However, despite a plenty of previous studies, the properties of turbulence remain poorly understood. As part of the Taeduk Radio Astronomy Observatory (TRAO) Key Science Program (KSP), "mapping Turbulent properties In star-forming MolEcular clouds down to the Sonic scale (TIMES; PI: Jeong-Eun Lee)", we mapped the Orion A and the Ophiuchus clouds, in three sets of lines (13CO 1-0/C18O 1-0, HCN 1-0/HCO+ 1-0, and CS 2-1/N2H+ 1-0) with a high-velocity resolution (~0.1 km/s) using the TRAO 14-m telescope. The mean Trms for the observed maps are less than 0.25 K, and all these maps show uniform Trms values throughout the observed area. These homogeneous and high signal-to-noise ratio data provide the best chance to probe the nature of turbulence in two different star-forming clouds, the Orion A and Ophiuchus clouds. We present comparisons between the line intensities of different molecular tracers as well as the results of a Principal Component Analysis (PCA).

• Ocean Systems Engineering
• /
• v.12 no.2
• /
• pp.225-245
• /
• 2022

More and more shipping containers are falling into the sea due to bad weather. Containers lost at sea negatively affect the shipping line, the trader and the consumer, and the environment. The question of locating and recovering dropped containers is a challenging engineering problem. Model-testing of small-scaled container models is proposed as an efficient way to investigate their falling trajectories to salvage them. In this study, we first build a standard 20-ft container model in SOLIDWORKS. Then, a three-dimensional (3D) geometric model in the STL (Standard Tessellation Language) format is exported to a Stratasys F170 Fused Deposition Modeling (FDM) printer. In total, six models were made of acrylonitrile styrene acrylate (ASA) and printed for the purpose of testing. They represent three different loading conditions with different densities and center of gravity (COG). Two samples for each condition were tested. The physical models were dropped into the towing tank of University of New Orleans (UNO). From the experimental tests, it is found that the impact of the initial position after sinking can cause a certain initial rolling velocity, which may have a great impact on the lateral displacement, and subsequently affect the final landing position. This series of model tests not only provide experimental data for the study of the trajectory of box-shape objects but also provide a valuable reference for maritime salvage operations and for the pipeline layout design.

• Applied Microscopy
• /
• v.25 no.3
• /
• pp.99-107
• /
• 1995

The morphological changes of primary solid particles as a function of process time on hypereutectic Al-15.5wt%Si alloy during semi-solid state processing with a shear rate of $200s^{-1}$ are studied. In this alloy, it was observed that primary Si crystals are fragmented at the early stage of stirring and morphologies of primary Si crystals change from faceted to spherical during isothermal shearing for 60 minutes. To understand the role of Al dissolved in the primary Si crystal by shear stress at high temperature, lattice parameters of the primary Si crystals are determined as a variation of high order Laue zone(HOLZ) line positions measured from convergent beam electron diffraction(CBED) pattern. The lattice parameter of the primary Si crystal in the rheocast Al-15.5wt%Si alloy shows tensile strain of about 5 times greater than that of the gravity casting. Increase of the lattice parameter by rheocasting is due to the increased amount of Al dissolved in the primary Si crystal accelerated by shear stress at high temperature. The amounts of solute Al in the primary Si crystal are measured quantitatively by EPMA method to confirm the CBED analysis.

• Journal of Environmental Health Sciences
• /
• v.41 no.6
• /
• pp.438-448
• /
• 2015

Objectives: This study was performed to examine the effects of storage time and temperature and their interaction on the hygienic quality parameters of shell eggs. Methods: Eggs from 40-week-old Hy-Line Brown hens were sampled immediately after being laid and subjected to storage periods of four weeks at a refrigerated temperature ($4-5^{\circ}C$) or room temperature ($13.0-19.7^{\circ}C$). Interior/exterior qualities were examined every one week. Results: Weight loss was 2.4-3.1%. The initial specific gravity of the eggs was maintained until one week at both temperatures. Air cell size exceeded 4 mm when stored for one week at room temperature, and two weeks at refrigerated temperature. Albumen index and Haugh unit were significantly decreased at both temperatures after one week (p<0.001). Rapidly increased pH of the albumen with one week of storage was observed, regardless of temperature (p<0.001). Extension of the storage for up to four weeks at room temperature resulted in remarkable deterioration of eggshell quality and instrumental color as redness (a). Air cell size, albumen and yolk indices, Haugh unit, pH of albumen and yolk were found to be influenced by storage time and temperature (p<0.001). Interaction effects between storage time and temperature were also significant for air cell size, pH of albumen and yolk (p<0.001). Conclusion: The results suggest that air cell size and pH of albumen and yolk were important parameters influenced by storage time and temperature in shell eggs. Storage time was more influential for air cell size, and temperature for the pH of yolk. Both variables almost equally influenced the pH of albumen.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.155-171
• /
• 2003

The purpose of this study was to analyze the kinematic variables of over head kick(OHK) in soccer with three dimensional analysis technique and show the kinematic characteristics of it. The 7 subjects were university football player who have been playing football more than 7 years. The OHK was filmed on 16mm video camera(30frame/sec.) kinematic variables were temporal, postures, and COG(center of gravity). The mean values and the standard deviation for each variables were obtained and used as basic factors for examining characteristics of OHK. The results of this analysis were as follows : Temporal variables : The total time elapsed(TE) of OHK was $0.95{\sim}1.14sec$, the 1st phase was 0.35sec., 2nd phase was 0.46sec., and 3rd phase was 0.22sec.. Posture variables : When subjects performed OHK at the impact event, the ankle and knee angle of kicking foot were more extend than supporting foot. but the hip angle of supporting foot were more extend than kirking foot. Moving distance of the center of mass of the both foot. When subject performed OHK at the impact event, the range of distance on mediolateral direction aspect into right left shoulder line, anteroposterior direction aspect was $20.9{\pm}10.5cm$, vertical direction aspect was $92.3{\pm}19.9cm$. Angular velocity : the faster angular velocity of knee ankle on the kicking foot pew form jump position to landing position, the faster velocity of ball became. C. O. G. variables. When subject performed OHK at the impact event, upper part of the body was getting lower, lower part of the body was getting higher.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.327-332
• /
• 2006

In airborne gravimetry, there are two data streams. One is the specific force measured by an air/sea gravimeter or accelerometers, the other is kinematic acceleration measured by DGPS. And the difference of them provides the gravity disturbance information. To satisfy the requirement of most applications, an accuracy of 1mGal $(1mCal=10^{-5}m/s^{2})$ with a spatial resolution of 1km is the aim of current airborne gravimetry. There are two different methods to derive the kinematic acceleration. The generally used method is to differentiate the position twice, and the position can be calculated by commercial DGPS software. The main defect of this method is that integer ambiguities need to be fixed to get the precise position solution, but it's not a trivial thing for long base line. And to fix integer ambiguities, the noisier iono-free measurement is used. When differentiation is applied, noise is amplified and will influence the accuracy of acceleration. The other method is to get carrier phase acceleration by differentiate the carrier phase first, and then using the acceleration of GPS satellite to derive the vehicle acceleration. The main advantages include that fixing integer ambiguities is not needed anymore, position can be relaxed to about 10 meters, and smoother acceleration can be got since iono-free measurement is not needed. In some literatures, it's considered that the dynamic performance of the second method is inferior to that of the first. Through analysis, it is found that the performance degradation in dynamic environment results from the simplification of the GPS carrier phase observable model. And an iterative algorithm is presented to compensate the model error. Using a dynamic GPS data from an aeromagnetic survey, the importance of this compensation is showed at last.

• Korean Institute of Interior Design Journal
• /
• no.26
• /
• pp.26-34
• /
• 2001

The problems with the small exhibition buildings such a small gallery and art center recently constructed did not make the characteristics of the place specifying and did not form a big flow in the line of urban connection. Also it was deficient in the image like a cultural space because of the commercial aspects of the individual buildings. According to this view, this study is to evaluate the exteriors of the small exhibition buildings that the public prefers on the psychological side as a design theory and then, it is to present the direction of desirable form constitution hereafter. In the design of the small exhibition buildings exterior that the public must prefers, the principles and techniques of constitution that operate are the most initiative as follows. As for the principles of unity in the constitution of the small exhibition buildings exterior that the public prefers, Eigen Value is 7.573 and the explanatory force takes 21.637% at the top and it plays a leading role. In the comparison of the appearance, it shows that it is a factor with the largest specific gravity. The next factors were grouped in good order: the balance, ornamental technique, change, shipping technique, rhythm, harmony, symbolic technique, area technique and adding technique. As a result, in the design of the small exhibition buildings exterior, the architects have to constitute the principles of balance, change, rhythm and harmony by most of the unity and the symbolic technique and form technique by most of the ornamental techniques harmoniously and have to give Identity like exhibition buildings.