• Korean Journal of Computational Design and Engineering
• /
• v.20 no.3
• /
• pp.238-245
• /
• 2015

Vulnerability assessment is a process to calculate the damage degree of a combat vehicle when the combat vehicle is attacked by an enemy. When the vehicle is hit, it is necessary to analyze the shot line to calculate which components are damaged and judge whether the armor of the vehicle is penetrated by enemy's warhead. To analyze the shot line efficiently, this paper presents the target modeling and the shot line analysis system to assess vulnerability of the ground combat vehicle. This system is easily able to do several functions: 1) the program reads STL files converted from CAD model which is designed by commercial CAD software. 2) It calculates the intersection between triangle of STL mesh and the shot line, and check if the components of the model are penetrated. 3) This program can visualize the results using OpenGL. The vulnerability assessment using the shot line analysis can be used to model the armor of the combat vehicle and arrange the inner components effectively in the early stage of development of the combat vehicle.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.7
• /
• pp.956-962
• /
• 2003

The Lippmann-Young equation has been widely used in electrowetting to predict the contact-angle change of a droplet on a insulating substrate with respect to the externally-applied electrical voltage. The Lippmann-Young equation is derived by assuming a droplet as a perfect conductor, so that the effect of the electrical double layer and the line tension are not taken into account. The validity of the assumption has never been checked before, systematically. In the present investigation, a modified Lippmann-Young equation is derived taking into account of the effect of the electrical double layer and the line tension. To assess their influence on contact-angle change in electrowetting, the electrostatic field around the three-phase contact line is analyzed by solving the Poisson-Boltzmann equation numerically. The validity of the numerical methods is verified by using the past theoretical results on the electrostatic field around a wedge-shaped geometry, which shows fairly good agreement. The results of the present investigation clearly indicate that the effect of the electrical double layer and the line tension is negligible for a millimeter-sized droplet. On the other hand, for a micron-sized droplet, the effect of the line tension can become a dominating factor which controls the contact-angle change in electrowetting.

• Journal of the Korean School Mathematics Society
• /
• v.24 no.2
• /
• pp.173-190
• /
• 2021

This study analyzed the proof of the inverse square law, which is said to be the core of Newton's , in relation to the geometric limit. Newton, conscious of the debate over infinitely small, solved the dynamics problem with the traditional Euclid geometry. Newton reduced mechanics to a problem of geometry by expressing force, time, and the degree of inertia orbital deviation as a geometric line segment. Newton was able to take Euclid's geometry to a new level encompassing dynamics, especially by introducing geometric limits such as parabolic approximation, polygon approximation, and the limit of the ratio of the line segments. Based on this analysis, we proposed to use Newton's geometric limit as a tool to show the usefulness of mathematics, and to use it as a means to break the conventional notion that the area of the curve can only be obtained using the definite integral. In addition, to help the desirable use of geometric limits in school mathematics, we suggested the following efforts are required. It is necessary to emphasize the expansion of equivalence in the micro-world, use some questions that lead to use as heuristics, and help to recognize that the approach of ratio is useful for grasping the equivalence of line segments in the micro-world.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.10 no.2
• /
• pp.63-71
• /
• 1992

The digital map database is often produced for multiple purposes, including mapping at multiple scales; it is increasingly rare that a base map is digitized for mapping at a single scale. The most important problems in process of line simplification in map generalization and multiple representation is that tolerance value selected for simplifying base map information must be modified as feature geometry varies within the digital file to ensure both accuracy and recognizability of graphic details on a generalized map. In this study, we explored various algorithms regarding to line simplication at many scales from a single digital file, and presents a rule by which to determine those scale at which line feature geometry might be expected to change in map representation. By applying two measured of displacement between a digitized line and its simplification, five algorithms have been evaluated. The results indicate that, of the five, the Douglas-Peucker routine produced less displacement between a line and its simplification. The research has proved to automating map simplification, incorporating numeric guidelines into digital environment about what magnitude and variation in geometric detail should be preserved as the digital data is simplified for representation at reduced map scales.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.5
• /
• pp.375-381
• /
• 2001

As the device geometry continuously shrink down less than sub-quarter micrometer, DRAM makers are going to replace conventional tungsten-polycide bit-line with tungsten bit-line structure in order to reduce the chip size and use it as a local interconnection. In this paper we showed low resistance tungsten bit-line fabrication process with various RTP(Rapid Thermal Process) temperature and additional ion implantation. As a result we obtained that major parameters impact on tungsten bit-line process are RTP Anneal temperature and BF$_2$ ion implantation dopant. These tungsten bit-line process are promising to fabricate high density chip technology.

• Journal of Educational Research in Mathematics
• /
• v.15 no.3
• /
• pp.273-286
• /
• 2005

We teach students to explore geometric figures by its properties and establish relationships between some basic figures. The concept of parallel line play very im-portant roles in such geometry learning process. In this study, 1 investigate the con-cept of parallel line we teaching in elementary school. Students have wrong concept images for parallel line, which is the result of the elementary school mathematics text books, where only typical cases for parallel line Is presented and there is no method to find if two lines is parallel or not. Therefore, we should teach explicitly students to find if two lines is parallel or not. The depth study on it is needed to develope students' geometric thought level.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.27-37
• /
• 2005

Direct writing technology on the silicon wafer surface is used to reduce the size of the chip as the miniature trend in electronic circuit. In order to improve the productivity and efficiency, the real time quality estimation is very important in each semiconductor process. In laser marking, marking quality is determined by readability which is dependant on the contrast of surface, the line width, and the melting depth. Many researchers have tried to find theoretical and numerical estimation models fur groove geometry. However, these models are limited to be applied to the real system. In this study, the estimation system for the line width during the laser marking was proposed by process monitoring method. The light intensity emitted by plasma which is produced when irradiating the laser to the silicon wafer was measured using the optical sensor. Because the laser marking is too fast to measure with external sensor, we build up the coaxial monitoring system. Analysis for the correlation between the acquired signals and the line width according to the change of laser power was carried out. Also, we developed the models enabling the estimation of line width of the laser marking through the statistical regression models and may see that their estimating performances were excellent.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.287-296
• /
• 2011

Turnout is a mechanical installation enabling railway trains to be guided from one track to another at a railway junction. A movable nose crossing frog is a device used at a railway turnout to eliminate the gap at the common crossing (High manganese, block, assembly crossing)which can cause impact damage, noise and vibration. Our government has a plan speed up of conventional line to 250km/h semi-high speed. We had already developed flexible turnout with fixed crossing(High manganese) and SFC fastening system can cover in the semi-high speed line In this study is about development of the movable nose crossing turnout available Semi-high speed line on concrete track. This paper describes about geometry, attack angle, bending stress at the nose, switching force, safety of continuous welded long rails. This movable nose crossing turnout is expected greatly increases passing speed of turnout in national railway.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.6
• /
• pp.1099-1104
• /
• 2007

A 1:6 Unequal 2-way Wilkinson power divider is proposed. The required microstrip line with $207{\Omega}$ characteristic impedance for 1:6 power divider is realized by adding defected ground structure (DGS) to the standard microstrip line. The adopted DGS has the rectangular geometry which results in the increased characteristic impedance. The rectangular-shaped DGS produces the transmission line having much higher characteristic impedance due to the increased equivalent inductance. The measured performances of the fabricated 1:6 power divider show the expected S-parameters with a good agreement with the predicted ones.

• Transactions of Materials Processing
• /
• v.23 no.6
• /
• pp.351-356
• /
• 2014

The current study aims to predict the forming limits considering the deformation characteristics of tailor rolled blank(TRB) during hot stamping. The formability of TRB is affected by the TRB line orientation because elongations change due to the intrinsic geometry within the sheet. To evaluate the forming limits, Nakazima tests were conducted at elevated temperatures with different TRB line orientations. Forming limit diagrams(FLD) of TRB can be predicted by an interpolating equation based on the Nakazima test. Predicted FLDs were used in FE-simulations of a rectangular drawing. The predicted limit drawing height was compared with experimental results. The simulation results show good agreement with the experimental ones with an error range of 3%.