• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1749-1753
• /
• 2003

We proposed several systems for 1Giga bit Modem. The first, Binary ASK(Amplitude Shift Keying) system has a high speed shutter transmitter and no IF(Intermediate Frequency) receiver only by symbol synchronization. The advantage of proposed system is that circuitry is very simple without IF process. The disadvantage of proposed system are that line spectrum occurs interference to other channels, and enhancement to 4-level system is impossible due to its large SNR degradation. The second, Binary phase modulation system has a high speed shutter transmitter and IF-VCO(IF-Voltage Controlled Oscillator) control by base-band phase rotation. Polarity of shutter window is changed by the binary data. The window should be narrow same as above ASK. The advantage of proposed system is which error rate performance is superior. The disadvantage of proposed system are that Circuitry is more complex, narrow pull-in range of receiver caused by VCO and spectrum divergence by the non-linear amplifier. The third, 4-QAM(Quadrature Amplitude Modulation)system has a nyquist pulse transmitter and IF-VCO control by symbol clock. The advantage of proposed system are that signal frequency band is a half of 1GHz, reliable pull-in of VCO and possibility of double speed transmission(2Gbps) by keeping 1GHz frequency-band. The disadvantage of proposed system are that circuit complexity of pulse shaping and spectrum divergence by the non-linear amplifier.

• 대한전자공학회논문지SD
• /
• 제47권6호
• /
• pp.22-34
• /
• 2010

기존의 영상 스케일러(scaler)들은 연산량과 하드웨어 복잡도를 줄이기 위해 선형 보간과 같은 간단한 보간을 적용함으로써 화질을 희생시키거나, 고품질 영상을 얻기 위하여 복잡한 보간 기법을 적용함으로써 전력소모와 크기가 큰 하드웨어 구조를 적용하여 왔다. 그러나 영상기기들의 소형화와 고화질 영상에 대한 사용자들의 욕구 증대로 소형, 저전력이면서 결과 영상의 화질 또한 우수한 스케일러의 개발이 중요시되고 있다. 따라서 본 논문은 실시간, 고화질, 소형, 저전력의 목표를 모두 달성할 수 있는 래스터 스캔(raster scan) 방식의 스케일러 하드웨어 구조를 제안한다. 본 논문에서 제안하는 스케일러는 기존의 3차 보간(cubic interpolation) 기법과 룩업테이블(look-up table) 구조를 개선하여 저전력화와 소형화를 달성하였다. 제안하는 스케일러 구조의 특징은 기존의 실시간 스케일러가 포함하던 버퍼를 라인메모리로 대체하여 메모리 접근 횟수를 줄임으로써 저전력을 달성할 수 있도록 했다는 것이며, 또한 기존의 룩업테이블 구조에서 사용하던 3차 보간 수식을 재정리하여 곱셈기 수와 룩업테이블의 크기를 줄임으로써 하드웨어를 소형화하는 방법을 제안하였다. 마지막으로 사용되는 계수의 크기에 따른 결과를 분석하여 영상의 화질과 하드웨어 크기 간의 최적의 타협점을 제시하였다.

• 한국해양공학회지
• /
• 제28권5호
• /
• pp.387-395
• /
• 2014

In this paper, a numerical analysis for an internal turret moored vessel located at a 400-m water depth is conducted. The target vessel has an internal turret that is located at the 0.2 Lpp position from the fore-side, with $3{\times}4$ complex mooring lines installed around the turret circumference. To investigate the motion response of the vessel and the structural reliability of the lines, model tests were conducted. The KRISO ocean basin has a water depth of 3.2 m, which represents 192m using a scaling of 1:60. In order to precisely represent the real-scale condition, equivalent mooring lines needed to be designed. Truncated mooring lines were designed to supplement the restriction of the flume's water depth and increase the reliability of the model testing. These truncated mooring lines were composed of two different chains in order to match the pre-tension, simultaneously restoring the curve and variation in the effective line tension. The static similarities were compared using a static pull-out test and free decaying test, and the dynamic similarities were matched via a regular wave test and combined environments test. Consequently, the designed truncated mooring system could represent the prototype mooring system relatively well in the aspects of kinematics and dynamics.

• 한국항공우주학회지
• /
• 제44권12호
• /
• pp.1017-1026
• /
• 2016

두 가지의 비표면 가시화 기법과 이들 기법의 와류 적용 예를 기술한다. 두 가지 가시화 기법 중 하나는 전통적인 연기선 기법이고, 또 다른 하나는 가정용 초음파 가습기에서 발생하는 미세 수적을 사용하는 기법이다. 연기선 기법은 공기 흐름 속도에 제한이 있으며(0.07 mm 지름의 연기선의 경우 약 5 m/sec), 오염의 문제점이 있지만 매우 정교하고 선명한 연기 유맥선 시트를 발생시킬 수 있다. 이 기법은 3차원 날개의 날개 끝 와류의 가시화에 적용되었다. 초음파 가습기 미세 수적 기법은 연기선 기법에 비하여 공기 흐름 속도를 보다 크게 할 수 있으며(10 m/sec 이상), 독성과 오염의 문제를 해결할 수 있다. 초음파 가습기 미세 수적 기법은 정점 스트레이크를 가지는 이중 삼각날개에서 발생하는 복잡한 와류 시스템의 가시화에 성공적으로 적용되었다.

• 한국건축시공학회지
• /
• 제9권5호
• /
• pp.111-117
• /
• 2009

건설공사는 복잡화, 다양화, 대형화 되고 있으며 이러한 다변화된 건설 환경에 대응하기 위해 건설 선진국에서는 다양한 발주방식을 도입 적용해 오고 있다. 국내에서도 지속적으로 발주제도를 개선해 오고 있으며, 최근에는 공공건설공사의 발주방식을 보다 다양화하려는 취지에서 국가계약법시행령 개정을 통해 "기술제안입찰", "설계공모 기술제안입찰"을 새로 도입하였다. 이러한 정부의 노력에 부합되도록 공공공사에 적절한 발주방식선정기준이 제시되어야 한다. 이에 본 연구에서는 기 발주된 건설 공사 실태 및 현황분석을 설문조사를 통하여 문제점을 정리하였고, 이 문제점에 대한 개선방안으로 사업유형별 발주방식 선정기준을 제시하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1705-1711
• /
• 1991

On-line fault detection and diagnosis has an increasing interest in a chemical process industry, especially for a process control and automation. The chemical process needs an intelligent operation-aided workstation which can do such tasks as process monitoring, fault detection, fault diagnosis and action guidance in semiautomatic mode. These tasks can increase the performance of a process operation and give merits in economics, safety and reliability. Aiming these tasks, series of researches have been done in our lab. Main results from these researches are building appropriate knowledge representation models and a diagnosis mechanism for fault detection and diagnosis in a chemical process. The knowledge representation schemes developed in our previous research, the symptom tree model and the fault-consequence digraph, showed the effectiveness and the usefulness in a real-time application, of the process diagnosis, especially in large and complex plants. However in our previous approach, the diagnosis speed is its demerit in spite of its merits of high resolution, mainly due to using two knowledge models complementarily. In our current study, new knowledge representation scheme is developed which integrates the previous two knowledge models, the symptom tree and the fault-consequence digraph, into one. This new model is constructed using a material balance, energy balance, momentum balance and equipment constraints. Controller related constraints are included in this new model, which possesses merits of the two previous models. This new integrated model will be tested and verified by the real-time application in a BTX process or a crude unit process. The reliability and flexibility will be greatly enhanced compared to the previous model in spite of the low diagnosis speed. Nexpert Object for the expert system shell and SUN4 workstation for the hardware platform are used. TCP/IP for a communication protocol and interfacing to a dynamic simulator, SPEEDUP, for a dynamic data generation are being studied.

• 한국발생생물학회:학술대회논문집
• /
• 한국발생생물학회 2003년도 제3회 국제심포지움 및 학술대회
• /
• pp.7-8
• /
• 2003

Since it was first reported in 1997, somatic cell cloning has been demonstrated in several other mammalian species. On the mouse, it can be cloned from embryonic stem (ES) cells, fetus-derived cells, and adult-derived cells, both male and female. While cloning efficiencies range from 0 to 20%, rates of just 1-2% are typical (i.e. one or two live offspring per one hundred initial embryos). Recently, abnormalities in mice cloned from somatic cells have been reported, such as abnormal gene expression in embryo (Boiani et al., 2001, Bortvin et al., 2003), abnormal placenta (Wakayama and Yanagimachi 1999), obesity (Tamashiro et ai, 2000, 2002) or early death (Ogonuki et al., 2002). Such abnormalities notwithstanding, success in generating cloned offspring has opened new avenues of investigation and provides a valuable tool that basic research scientists have employed to study complex processes such as genomic reprogramming, imprinting and embryonic development. On the other hand, mouse ES cell lines can also be generated from adult somatic cells via nuclear transfer. These 'ntES cells' are capable of differentiation into an extensive variety of cell types in vitro, as well assperm and oocytes in vivo. Interestingly, the establish rate of ntES cell line from cloned blastocyst is much higher than the success rate of cloned mouse. It is also possible to make cloned mice from ntES cell nuclei as donor, but this serial nuclear transfer method could not improved the cloning efficiency. Might be ntES cell has both character between ES cell and somatic cell. A number of potential agricultural and clinical applications are also are being explored, including the reproductive cloning of farm animals and therapeutic cloning for human cell, tissue, and organ replacement. This talk seeks to describe both the relationship between nucleus donor cell type and cloning success rate, and methods for establishing ntES cell lines. (중략)

• Molecular & Cellular Toxicology
• /
• 제3권4호
• /
• pp.292-298
• /
• 2007

Zinc plays indispensable roles in metabolism, including cell growth, apoptosis, proliferation and differentiation. Kidneys are target organs for various regulators of mineral metabolism, and play a key role in zinc balance. To investigate the zinc uptake efficiency, we examined the zinc uptake and accumulation level in vivo and in vitro study. Plasma zinc concentration was peaked out at 1 hr after oral zinc administration. The renal zinc level was peaked out at 12 hr after oral zinc administration, and it was the highest in 40 mg/kg Zn-Asp administrated group in comparison with other groups. In addition, the m-RNA expression level of zinc transporter-1 (ZnT-1), zinc transporter-2 (ZnT-2) and high-affinity L-aspartate transporter (EAAT-3) in Zn-Asp administered group were increased compared with control groups and $ZnSO_4$ group. In order to investigate the intracellular zinc uptake mechanism, we performed the in vitro study by using human embryonic kidney cell line, HEK 293. Intracellular zinc level was peaked out at 3 hr after zinc treatment. In the same way, the mRNA expression level of ZnT-1 and EAAT-3 were increased compared with control group. This study showed that Zn-Asp is effective the zinc uptake into the kidney by increasing the zinc transporter expression.

• 대한두개안면성형외과학회지
• /
• 제14권2호
• /
• pp.119-123
• /
• 2013

Except for special situations, it is generally agreed that best results in the treatment of facial fractures is expected if reduction is done within the first 2 or 3 weeks after injury. We reduced facial bone fractures at 4 to 7 weeks after trauma. A 44-year-old female patient underwent open reduction for her right zygomaticomaxillary complex fracture at 7 weeks after injury. A 59-year-old female patient underwent surgery for the right mandible body and left parasymphysis fractures at 4 weeks after injury. Using traditional approaches, granulation tissue and callus were removed from the fracture sites, and malunited fracture lines were separated by a small osteotome. We reduced the displaced fractured zygoma and mandible to their normal anatomical positions and fixed them using titanium plates. No complications such as asymmetry, malunion, malocclusion, or trismus were seen. Unfavorable asymmetric facial contours were corrected, and we obtained good occlusion with favorable bony alignment. The functional and aesthetic outcomes were satisfactory. Through removal the callus and limited osteotomy, a successful approach to the previously fractured line was possible, and an exact correction with symmetry was obtained. This method can be a good option for obtaining good mobility and clinical results in treating delayed facial bone fractures.

• 복식
• /
• 제51권4호
• /
• pp.15-30
• /
• 2001

The purpose 7f this study is to investigate the change of the ideal beauty of human bodies and the related clothing form designs from the ancient Egypt to the Romantic Period in the aspect of optical illusions effects to achieve the ideal beauty so that we can accumulate the knowledges for the modern clothing form design and the related optical illusion effects. The scope of this study is limited to the female body forms and female dress forms. The analysis on the optical illusions in the dress forms of the various period relied on the literatures and some representative photographs and figures. The important results are as follows : 1. In the body Priority type designs of Egypt, Greece and Rome, the natural Beauty of human bodies was represented by H type silhouett, the smooth and transparent drapery materials were used with radiant line pleats resulting in slant optical illusions. 2. In the clothing priority type designs of Byzantine, Gothic, Renaissance, Baroque, Rococo and Romantic Period, manteau, cotehardie, hennin and poulain were used to emphasize long arms and legs, high waists, belly curves and large heads resulting in optical illusions of vertical emphasize. Also long train, farthingale and panier were used to emphasize body expansion resulting in the optical illusions of Titchener alld Lipps. Large and complex patterns showed the optical illusions of Aubert. 3. In the clothing priority/body concealment type of Byzantine period, thick materials with precious gems and voluminous silhouettes were used to emphasize body expansion resulting in optical illusions of materials.