• 산업공학
• /
• 제25권2호
• /
• pp.264-275
• /
• 2012

The process of semiconductor(IC Package) manufacturing usually includes lots of complex and sequential processes. Many kinds of equipments are installed with the mixed concept of serial and parallel manufacturing system. The business environments of the semiconductor industry have been changed frequently, because new technologies are developed continuously. It is the main reason of new investment plan and layout consideration. However, it is difficult to change the layout after installation, because the major equipments are expensive and difficult to move. Furthermore, it is usually a multiple-objective problem. Thus, new investment or layout change should be carefully considered when the production environments likewise product mix and production quantity are changed. This paper introduces a simulation case study of a Korean company that produces packaging substrates(especially lead frames) and requires multi-objective decision support. $QUEST^{(R)}$ is used for simulation modelling and AHP(Analytic Hierarchy Process) and DEA(Data Envelopment Analysis) are used for weighting of qualitative performance measures and solving multiple-objective layout problem, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1957-1959
• /
• 2000

The PD measurement method is very useful to detect insulation degradation. Recently, the HFPD(High Frequency Partial Discharge) measurement testing is widely used in partial discharge measurement of HV machines because HFPD measurement testing receives less influence of external noise and has a merit of good sensitivity. Therefore it is very useful method compare to previous conventional PD testing method and effective diagnosis method in power transformer that requires in-service diagnosis. But partial discharges have very complex characteristics of discharge pattern so it is required continuous research to development of precise analysis method. In this study, simulated transformer is manufactured and HFPD occurred from simulated transformer is measured with broad band antenna and active-line RF measurement system in real time, the degradation grade of transformer is analyzed through produced patterns in simulated transformer according to applied voltages. Also the PD pattern which was measured with EMC analyzer and RF measurement system is compared.

• Bulletin of the Korean Chemical Society
• /
• 제26권8호
• /
• pp.1219-1224
• /
• 2005

We prepared lead ion-selective PVC membranes that were based on N,N'-bis-thiophene-2-ylmethylene-ethane-1,2-diamine as a membrane carrier. The membrane electrode has a linear dynamic range between 1.0 ${\times}$ $10^{-5}$ and 1.0 ${\times}$ $10^{-1}$ M with a Nernstian slope of 29.79 mV per decade, and its detection limit was 2.04 ${\times}$ $10^{-6}$ M at room temperature. The potentiometric response is independent of the pH of the solution in the pH range of 5-7. The proposed electrode revealed good selectivity and response for $Pb^{2+}$ over a wide variety of other metal ions in pH 5.0 buffer solutions, and there was good reproducibility of the base line on the subsequent measurements. The membrane electrode has a relatively fast response time, satisfactory reproducibility and a relatively long life time.

• Bulletin of the Korean Chemical Society
• /
• 제25권6호
• /
• pp.852-858
• /
• 2004

Crystal structures of lanthanide complexes with NTA (NTA = nitrilotriacetate) are reported. The complexes of $[Ln(NTA)_2{\cdot}H_2O]^{3-}$ (Ln = Sm, Eu, Gd, Tb and Ho) crystallize in the orthorhombic space group Pccn. In the structures, the trivalent lanthanide ions are completely encapsulated via coordination to the two nitrogen atoms and the six carboxylate oxygen atoms of the two NTA ligands, and one water oxygen atoms. The complexes form a slightly distorted capped-square-antiprism polyhedron. Of the complexes, $[Eu(NTA)_2{\codt}H_2O]^{3-}$,\;[Tb(NTA)_2{\cdot}H_2O]^{3-}\;and\;[Dy(NTA)_2{\cdot}H_2O]^{3-}$ excited at the 325 He-Cd line produce very characteristic luminescence features, arising mostly from the f ${\to}$ f transitions. The absolute quantum yields of these complexes are determined at room temperature. Surprisingly, the $[Dy(NTA)_2{\cdot}H_2O]^{3-}$ complex is more luminescent than the $[Eu(NTA)_2{\cdot}H_2O]^{3-}\;and\;[Tb(NTA)_2{\cdot}H_2O]^{3-}$ complexes.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 추계학술대회 논문집
• /
• pp.63-69
• /
• 1999

The research trend of the simulation optimization has been focused on exploring continuous decision variables. Yet, the research in discrete decision variable area has not been fully studied. A new research trend for optimizing discrete decision variables ha just appeared recently. This study, therefore, deals with a discrete simulation method to get the system evaluation criteria required for designing a complex probabilistic discrete event system and to search the effective and reliable alternatives to satisfy the objective values of the given system through a on-line, single run with the short time period. Finding the alternative, we construct an algorithm which changes values of decision variables and a design alternative by using the stopping algorithm which ends the simulation in a steady state of system. To avoid the loss of data while analyzing the acquired design alternative in the steady state, we provide background for estimation of an auto-regressive model and mean and confidence interval for evaluating correctly the objective function obtained by small amount of output data through simulation with the short time period. In numerical experiment we applied the proposed algorithm to (s, S) inventory system problem with varying Δt value. In case of the (s, S) inventory system, we obtained good design alternative when Δt value is larger than 100.

• 한국자기학회지
• /
• 제9권2호
• /
• pp.85-90
• /
• 1999

LPE(liquid phase epitaxy)방법으로 제작한 YIG박막의 정자파 모드를 연구하기 위해서 강자성공명 실험을 하였다. 시편면과 오부자기장이 평행할 때 주기적인 신호로 나타나는 정자표면파와 정자역체적파 모드를 관측하였으나 서로 수직할 때는 복잡한 신호를 관측하였다. 평행할 때 관측한 정자파 모드를 Walker와 Damon-Eshbach이론으로 분석한 결과 잘 설명되었다. 관측된 정자파 모드의 선폭은 0.4Oe이었고, 이론으로 분석할 때 구한 포화자화는 137emu/㎤이었다. 또한 시편의 포화자화 값의 변화와 두께의 변화에 따른 모드들의 변화를 알아보기 위하여 정자역체적파의 (1, 1)과 (3, 1)모드를 계산하고 서로 비교하였다.

• Corrosion Science and Technology
• /
• 제10권2호
• /
• pp.43-46
• /
• 2011

Zinc consumption in a continuous galvanizing line is one of the highest operating cost items in the facility and minimizing zinc waste is a key economic objective for any operation. One of the primary sources of excessive loss of zinc is through the formation of top dross and skimmings in the coating pot. It has been reported that the top skimmings, manually removed from the bath, typically consist of more than 80% metallic zinc with the remainder being entrained dross particles ($Fe_2Al_5$) along with some oxides. Depending on the drossing practices and bath management, the composition of the removed top skimmings may contain up to 2 wt% aluminum and 1 wt% iron. On-going research efforts have been aimed at in-house recovery of the metallic zinc from the discarded top skimmings prior to selling to zinc recycling brokers. However, attempting to recover the zinc entrapped in the skimmings is difficult due to the complex nature of the intermetallic dross particles and the quality and volume of the recycled zinc is highly susceptible to fluctuations in processing parameters. As such, an efficient method to extract metallic zinc from top skimmings has been optimized through the use of a specialized thermo-mechanical process enabling a continuous galvanizing facility to conserve zinc usage on-site. Also, through this work, it has been identified that filtration of discrete dross particles has been proven effective at maintaining the cleanliness of the zinc. Future efforts may progress towards expanded utilization of filters in continuous galvanizing.

• 천문학논총
• /
• 제30권2호
• /
• pp.103-105
• /
• 2015

The 22 m diameter Mopra telescope in Australia is being used to undertake an improved survey of the CO J = 1-0 line at 3mm along the 4th quadrant of the Galaxy, achieving an order of magnitude better spatial and spectral resolution (i.e. 0.6 and 0.1 km/s) than the Dame et al. (2001) survey that is publically available for the Southern Galactic plane. Furthermore, the Mopra CO survey includes the four principal isotopologues of the CO molecule (i.e. $^{12}CO$, $^{13}CO$, $C^{18}O$ and $C^{17}O$). The survey makes use of an 8 GHz-wide spectrometer and a fast mode of on-the-fly mapping developed for the Mopra telescope, where the cycle time has been reduced to just 1/4 of a second. 38 square degrees of the Galaxy, from $l=306-344^{\circ}$, $b=0{\pm}5^{\circ}$ have currently been surveyed, together with additional 9 sq. deg. regions around the Carina complex and the Central Molecular Zone. We present new results from the survey (see also Burton et al., 2013, 2014). The Mopra CO data are being made publically available as they are published; for the latest release see the project website at www.phys.unsw.edu.au/mopraco.

• 대한화학회지
• /
• 제41권10호
• /
• pp.524-534
• /
• 1997

고무가황체는 고분자인 천연고무 및 합성고무에 여러 가지 유기첨가제를 배합하여 만든다. 이와 같은 배합고무의 분석은 여러 가지 다른 성질을 갖는 다양한 첨가제들로 인하여 많은 전처리 과정을 거쳐야 하므로 그 분석이 용이하지 않다. 이를 극복하기 위하여 열분해 가스크로마토그래피질량분석법(Pyrolysis Gas Chromatography-Mass Spectrometry)을 이용하여 고무가황체 중의 유기 고무약품들의 직접분석을 시도하였다. 점착제인 쿠마론-인덴수지(coumarone-indene resin $C-90^{TM}$), 접착제인 알킬페놀 레조시놀 포름알데히드 수지, 가류지연제 등의 고무첨가제의 열분해과정 및 열분해체들의 질량스펙트럼들을 확인하였고 이를 통하여 복잡한 구성 성분으로 이루어진 가황고무 중에서 이들 배합제의 직접분석이 가능하였다.

• Structural Engineering and Mechanics
• /
• 제55권5호
• /
• pp.1055-1086
• /
• 2015

The dynamic response of two-dimensional unbounded domain on the rigid bedrock in the time domain is numerically obtained. It is realized by the modified scaled boundary finite element method (SBFEM) in which the original scaling center is replaced by a scaling line. The formulation bases on expanding dynamic stiffness by using the continued fraction approach. The solution converges rapidly over the whole time range along with the order of the continued fraction increases. In addition, the method is suitable for large scale systems. The numerical method is employed which is a combination of the time domain SBFEM for far field and the finite element method used for near field. By using the continued fraction solution and introducing auxiliary variables, the equation of motion of unbounded domain is built. Applying the spectral shifting technique, the virtual modes of motion equation are eliminated. Standard procedure in structural dynamic is directly applicable for time domain problem. Since the coefficient matrixes of equation are banded and symmetric, the equation can be solved efficiently by using the direct time domain integration method. Numerical examples demonstrate the increased robustness, accuracy and superiority of the proposed method. The suitability of proposed method for time domain simulations of complex systems is also demonstrated.