• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.175-181
• /
• 2010

In this paper, we propose a novel hardware architecture for Rate control module for real time full HD video compression. In the proposed architecture, QP is updated by using the rate control algorithm to every the macroblock line(120MB for Full HD, 20MB for CIF image). Since there are many complex arithmetic and floating point arithmetic in rate control algorithm of JM for H.264, it is impossible to process the rate control algorithm using the integer arithmetic CPU core. So we adopted floating point arithmetic unit in our architecture, and implemented the rate control algorithm using the floating unit. With this implemented hardware, the implemented hardware is verified to be operated in real time.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.108-114
• /
• 2005

The generation of fine relics of suspensions is a significant interest as it holds the key to the fabrication of electronic devices. These processes offer opportunities for miniaturization of multilayer circuits, for production of functionally graded materials, ordered composites and far small complex-shaped components. Some novel printing methods of depositing ceramic and metal droplets were suggested in recent years. In an electro-hydrodynamic printing, the metallic capillary nozzle can be raised to several kilovolts with respect to the infinite ground plate or pin-type electrode positioned a few millimeters from the nozzle tip. Depending on the electrical and physical properties of the liquid, for a given geometry, it Is possible to generate droplets in any one of three modes, dripping, cone-jet and multi-jet. In this experiment, an alumina suspension flowing through a nozzle was subjected to electro-hydrodynamic printing using pin-type electrodes in the cone-jet mode at different applied voltages. The pin-type electrodes of 1, 100, 1000${\mu}m$ in diameter were used to form fine ceramic patterns onto the substrates. Various feature sizes with applied voltages and electrode diameters were measured. The feature sizes increased with the electrode diameter and applied voltages. The feature size was as fine as $30 {\mu}m$.

• Journal of Power System Engineering
• /
• v.13 no.3
• /
• pp.27-32
• /
• 2009

Numerical analysis information of a complex discharge-passage will be very useful to improve hydrogen compression system. General information about an internal gas flow is presented by numerical analysis approach. Relating with hydrogen compressing system, which have an important role in hydrogen energy utilization, this should be a useful tool to observe the flow quickly and clearly. Flow characteristic analysis, including pressure and turbulence kinetic energy distribution of hydrogen gas from cylinder going to the chamber of a reciprocating compressor are presented in this paper. Discharge-passage model is designed based on real model of hydrogen compressor. Pressure boundary conditions are applied considering the real condition of operating system. The result shows pressure and turbulence kinetic energy are not distributed uniformly along the passage of the hydrogen compressing system. Path line or particles tracks help to demonstrate flow characteristics inside the passage. The existence of vortices and flow direction can be precisely predicted. Based on this result, the design improvement should be done. Consequently, development of the better hydrogen compressing system will be achieved.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.74-74
• /
• 2009

The purpose of this study was to estimate force of muscles that constituted the rotator cuff during elevation motion in scapula plane, using a skeletal muscle model and quantitatively evaluate rotator cuff function in vivo. A healthy volunteer was measured with an open MR and CT system at elevation positions in scapula plane (MR: $30^{\circ}$, $60^{\circ}$, $90^{\circ}$, $120^{\circ}$, $150^{\circ}$, CT: $0^{\circ}$). After reconstruction three-dimensional MRI-based and CT-based bone surface models, matched each models with registration technique. Then supraspinatus, infraspinatus, subscapularis, teres minor, deltoid (anterior, middle, posterior portions) represented as plural lines. These lines were proportional to physiologic cross-sectional area (PCSA) and defined straight line to bind origin and insertion. Force of supraspinatus became greatest at $59^{\circ}$ of elevation. Subsequently force of deltoid middle portion became greatest at $89^{\circ}$ of elevation. Infraspinatus and subscapularis were active at the meantime. In addition, supraspinatus was active during elevation. These results resembled clinical finding and were proved force couples that contribute to mobility and stability of shoulder complex.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.8-15
• /
• 2006

The size of the superconducting domains and the critical current density inside these domains have to be enhanced for most of cryomagnetic applications of melt-textured YBCO bulks. To enlarge the size of the domains we studied the multi-seeding technique based on a well-established procedure for preparing high quality YBCO monoliths using self-made SmBCO seeds. The distance between the seeds was optimised as a result of the investigation of the effects of various seed distances on the characteristics of the grain boundary Junctions. The influences of a-b plane intersections and c-axis misalignments were researched. Thereby, a small range of tolerance of the misorientations between the seed crystals was found. Field mapping was applied to control the materials quality and the superconductor's grain structure was investigated using polarisation microscopy. YBCO function elements with iou. seeds in a line and an arrangement of making type (100)/(100) and (110)/(110) boundary junctions, respectively, were processed. The trapped field profile in both sample types shows single domain behaviour. To demonstrate the potential of the multi-seeding method a ring-shaped sample was processed by placing sixteen seeds in a way to make both (100)/(100) and (110)/(110) grain junctions at the same time. The results up to now are very promising to prepare large single domain melt-textured YBCO semi-finished products in complex shapes.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.33-42
• /
• 2007

This study analyzes presentation methods of traffic guide maps to guide drivers easily and correctly to their destinations on complex road networks. The problems of Korea's guidance systems were analyzed and domestic and international road guide maps were compared. This study includes the problems of road number discernment, such as the sizes, colors and marking intervals on the map. The widths and colors of different hierarchical roads were evaluated. The indices, enlarged downtown maps and uncertainty of grade separation on the map were analyzed and the solutions were also provided.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.2
• /
• pp.149-157
• /
• 2015

Ball and roller bearings are commonly used machine elements for supporting rotating motion about shafts in simple devices including bicycles, in-line skates, and electric motors, as well as in complex machines. Heat is generated by the friction in the bearings, which causes the temperature inside the bearing to increase. If the heat is not appropriately removed from the bearing, elevated temperatures may give rise to premature failure. It is, therefore, important to be able to calculate the temperature in the bearings due to friction.Here, we describe a method to estimate the frictional torque in bearings using an empirical formula developed using a method based on bearing analysis tool and the measured frictional torque in a spindle system. Thermal analysis of the spindle system including the bearings was achieved using the finite element method (FEM), and the bearing temperature was compared with measured data to verify the empirical formula.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.309-310
• /
• 2006

This paper is about the development of surface inspection of bearing inner and outer race using machine vision. Before this system is developed, most inspections are performed by workers' naked eye. To improve both the inconvenience and incorrectness, another new tester is introduced. This system has the three sections mainly. First one is the mechanism section which transfers bearing manufactured from previous process line to the testing process in plant. Another is the inspection system which is composed of two parts: computer vision and measurement system using laser diode which inspects the defects of the bearing inner or outer race. The other is the pneumatic cylinder part controlled by Programmable Logic Controller(PLC). The system which is developed shows favorable results, and that has the advantage of convenience and correctness compared to previous system.

• Journal of Welding and Joining
• /
• v.28 no.2
• /
• pp.47-53
• /
• 2010

According to the research report for the recent a few years, the dissimilar welding of Cu and STS 304 alloy have been presented that a weldability is very poor. This article present a study on Lap joint by Electron beam welding dissimilar materials. The weld metals was constituted between pure copper and STS 304 steel. The experiment was performed with 125mA welding current, 520mA focusing current. The Vacuum condition of chamber is 5${\times}$10-5torr and welding speed is 300mm/min. Showing the bead shape of weld metal, the thickness of the stainless 304 using as the protect materials is 3mm and the thickness of a copper is 15mm. The analysis about the microstructure were carried out in which it was observed with SEM. The results showed that complex heterogeneous fusion zone microstructure characterized both by rapid cooling and mixing of the molten metal, however the liquation crack was formated in the fusion line.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.10
• /
• pp.1841-1861
• /
• 2011

The advance in Service-Oriented Architecture (SOA) and web services has led to the development of new types of a system in which heterogeneous service components can connect and compose to solve a complex business problem. In the SOA, even though these service components are valid in their functionality, there is a need to test their behaviors when those services are composited. In recent years, WS-BPEL has received a wide acceptance as a means of integrating distributed service components. To test the composite service, the existing testing techniques have been focused on the functional features based on the WS-BPEL process. However as SOA approach is applying to real-time software development, the performance of composite service becomes one of important issues. This paper proposes a technique to the performance testing of a composite service with WS-BPEL extension which combined with the concept of aspect. Our WS-BPEL extension has been made towards annotating aspect component which is measuring the response time of the composite service. This paper also explains the procedure of performance testing with on-line transaction system. Our technique can apply to choose an adequate component in service composition with considering the performance among several candidate web service components.