• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.219-226
• /
• 2004

We measure subsidences occurred in a reclaimed coastal land, Noksan industrial complex, by using JERS-1 SAR (1996-1998) and RADARSAT-1 SAR (2002-2003) dataset. SAR with a high spatial resolution (about several or several tens meter) can reveal the two-dimensional distribution of settlement that would be bardly estimated from in situ measurements. The DInSAR results show significant deformation signal associated with soil consolidation. Accuracy of the settlements estimated by 2-pass differential interferometry (DInSAR) is evaluated using the measurements of settlement gauge. A two-dimensional subsidence map is constructed from 7 qualified pairs. Comparing the JERS-1 radar measurements with the ground truth data yields the correlation coefficient of 0.87 (RMSE of 1.44 cm). The regression line shows the gradient of 1.04 and intercepts close to the origin, which implies that the unbiased settlement can be measured by DInSAR technique. The residual settlements are also detected from RADARSAT-1 pairs. The extent and amount of the settlements are matched well with ground truth data.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권1호
• /
• pp.37-41
• /
• 2005

This paper describes the construction scheme of new distribution system using HTS(High Temperature Superconducting) power equipments such as cable, transformer and FCL(fault current limiter). At present, one of the most serious problems in distribution power system, especially for metropolitan complex city, is to obtain the ROW for cable line routes, space for downtown substations and satisfy the environmental protection caused by NIMBY phenomena. Unfortunately, it is expected that this situation will get more and more worse. As the HTS technology to apply in power system Is developed, HTS cable utilizing mass-capacity characteristic can be a useful countermeasure to overcome this problem. This paper describes the application methodology of 22.9kV HTS cable with low-voltage, mass-capacity characteristics replacing the 154kV conventional cable. By applying 22.9kV HTS cable, the HTS transformer with higher capacity for the reduction of space and transformer numbers of downtown substation is necessary. Also, if the leakage Impedance of HTS transformer is same as or lower than that of conventional transformer, the fault current of 22.9kV bus will increase because the HTS transformer capacity is larger than that of the conventional transformer. This means the parallel application of HTS-FCL to reduce the fault current in addition to the HTS cable and transformer can be necessary. With the basic construction scheme of new distribution system, this paper describes the future study points to realize this new distribution system using HTS equipments.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1146-1149
• /
• 2004

A new developed impulse current test system(100kV, 250kJ)is presented, which can carry out all impulse current and performance tests on surge arrester sections with rated voltage up to 12kV according to IEC 60099-4(2001). The maximum achievable peak value is 200kA for the impulse current $4/10{\mu}s$ and 60kA for the $30/80{\mu}s$ and $8/20{\mu}s$. The long duration current impulse is realized from class 1 to class 5. The digital transient recorder(4 channels 60MS/S 10bit) is used for measuring AC voltage, impulse current, reference voltage and leakage current. The complex control, measuring, evaluation and data storage system is controlled by one industrial PC system.

• 전기학회논문지
• /
• 제64권9호
• /
• pp.1406-1410
• /
• 2015

The railway catenary systems consist of a complex structure, electrical and mechanical conditions are exposed to dangerous environment due to current collection between pantograph and catenary systems. These two types of conditions for the catenary systems are critically assessed for management and are becoming increasingly more dependent on reliable inspection system. In this paper, a new measurement system which enables inspection of catenary faults was studied and implemented. The system uses wavelength band of ultraviolet (UV) and IR (Infrared) to measure the insulation of corona and temperature of catenary wire. In order to determine the sensitivity of implemented system, the performance test such as distance detection range of UV camera and temperature resolution of IR camera were conducted, respectively. The field test of development system was also conducted in metro and high-speed line using mobile type UV and IR multi-composited measurement systems.

• 천문학회보
• /
• 제37권1호
• /
• pp.80.1-80.1
• /
• 2012

NGC 6803 is an elliptical ring shape planetary nebula. We analyzed the high dispersion spectra which had been observed with the Hamilton Echelle Spectrograph attached to the 3-m Shane telescope of Lick Observatory. We also investigated the low dispersion UV spectral data obtained with the 60-cm interstellar ultraviolet explorer. Diverse excitation lines were found from neutral to quadruply ionized ions. The temperature diagnostic lines indicate relatively low electron temperatures, i.e., $T_{\epsilon}{\leq}9500$ K for most lines except for [ClIV] - 11,500 K. In spite of its simplistic bi-laterally symmetrical elliptical shape, the nebula appears to be very complex of a hugh density range from 1300 to 80,000 $cm^3$. A comparison of the two epoch data suggests that the density increase occurred in the high excitation line zone near the inner boundary. We derived the chemical abundances of He, C, N, O, Ne, S, Ar, Cl, and K. The chemical abundances of NGC 6803 are enhanced compared with the average Galactic planetary nebula. Our self-consistent photo-ionization model study implies that the effective temperature of the central star is 90,000 K and its luminosity is 2400 $L_{\odot}$. The evolutionary track suggests that the progenitor of NGC 6803 was about 0.9 -- 1.0 $M_{\odot}$ star, which might be born from a metal-rich zone near the galactic disk, but now relocated into the present high Galactic latitude.

• 복식
• /
• 제44권
• /
• pp.131-141
• /
• 1999

The purpose of this study was to investigate the various expressions with materials in fashion illustration using CAD comparing with hand work. The design motive for this study is to be selected from Bell Epoque era which was the revolutionary period in fashion illustration. The results of this study were as follows: 1. By using CAD, water color was well expressed to repeat brushing for the clarity, darkness, and brightness. It was more effective to use CAD in layering or duplicating complex and intricate patterns because the base color gets to be concealed under the repeated oil pastel. Acryl, like oil pastel, was easily absorbed in canvas, so it is effective to repeat brushing for expressing pure color. It was inconvenient to use wax crayon for controlling the moderate opacity because wax crayon absorbed water color dye stuffs, so crayon line was concealed when repetitions were being done. 2. The advantage of using CAD was convenience for getting rid of troublesome process and inefficient works. Also, CAD had a good tool like oil pastel in the use of coloring work by using pure color. By using CAD, various expressions on materials and texture of surface can be achieved effectively. Also, it is very strong substitute for time-saving, convenience, economic aspects from providing simple instrument, and production in the state of various kinds of paper and canvas as a method of visualization. Therefore, fashion illustration using CAD provides effective way of producing works, and gives promising vision in the future.

• 복식
• /
• 제62권3호
• /
• pp.120-136
• /
• 2012

The purposes of this study is to analyze the formative relationship between artistic eye-makeup and clothes design by focusing on the period from 2000 to 2010 and to find out the development direction of the next makeup design. This study considered formative theory to analyze the formative relationship between artistic eye-makeup and clothes design of $Marian$ $L.$ $Davis$ and $Marilyn$ $R.$ $Delong's$ theory, and analyzed the formative relationship between artistic eye-makeup and clothes design in an aspect of line and form, color and material, The results are as follows: First, the shapes of the artistic eye-makeup such as tear drops, and rectangular paisleys were similar with the form of clothes such as the hourglass, cylinders and mix-types. Second, monotonic color coordination mainly appeared and sometimes contrast color coordination that induced complex contrast coordination were apparent as well. Third, the objects of the artistic eye-makeup such as glitter papers, spangles and beads had similar features as the material of clothes such as silk and spangle, and contrast was partially used like colors. The results suggest that artistic eye-makeup and clothes have an organic relationship, and artistic eye-makeup is changed with formative elements of clothes.

• Architectural research
• /
• 제13권3호
• /
• pp.19-29
• /
• 2011

Visibility of a space have been defined in several different ways: such as the axial line covering a convex space, a convex space defining the fattest shape in a space and an Isovist field formed by a field of vision at a given vantage point. Isovist fields are referred to as a descriptive medium to describe a movement by reviewing and analyzing geometric properties in them. Many descriptive methods for analysis of three-dimensional isovist are applied to analyzing the morphological properties in a 3D space more realistically. Although these models are regarded as a more advanced method for describing spatial properties, they have pros and cons such as complex mathematical calculations and somewhat arbitrary calibration in addition to huge consumption of memory space. These difficulties lead to the development of a three-dimensional visual accessibility model that explores the implication of building shape on the calculation of isovist fields drawn on a 2D plane. We propose a conceptual framework of how to measure the isovist field not as a 3D volume but as a combination of 2D plane on the ground with the 3D building shape of it's facade.

• 대한임베디드공학회논문지
• /
• 제11권3호
• /
• pp.163-171
• /
• 2016

Lane detection is a widely researched topic. Although simple road detection is easily achieved by previous methods, lane detection becomes very difficult in several complex cases involving noisy edges. To address this, we use a Convolution neural network (CNN) for image enhancement. CNN is a deep learning method that has been very successfully applied in object detection and recognition. In this paper, we introduce a robust lane detection method based on a CNN combined with random sample consensus (RANSAC) algorithm. Initially, we calculate edges in an image using a hat shaped kernel, then we detect lanes using the CNN combined with the RANSAC. In the training process of the CNN, input data consists of edge images and target data is images that have real white color lanes on an otherwise black background. The CNN structure consists of 8 layers with 3 convolutional layers, 2 subsampling layers and multi-layer perceptron (MLP) of 3 fully-connected layers. Convolutional and subsampling layers are hierarchically arranged to form a deep structure. Our proposed lane detection algorithm successfully eliminates noise lines and was found to perform better than other formal line detection algorithms such as RANSAC

• 한국인터넷방송통신학회논문지
• /
• 제15권2호
• /
• pp.181-187
• /
• 2015

본 논문은 LED 조명을 이용한 실내 환경에서 사용자가 운동 및 휴식을 취할 때 퍼지 추론을 통하여 상황에 최적화된 LED 감성조명 알고리즘을 구현한다. 기존의 단순 색온도 제어보다 퍼지이론을 사용하여 복잡한 조건하에서 색상과 색온도를 사용자 환경에 맞게 LED 광원을 컨트롤 한다. 사용자의 행동에 따라 감성언어의 색상과 온도에 따른 색상의 배합을 통한 퍼지 추론 기반의 LED 감성조명 시스템을 설계한다. 그 결과 색상과 색온도가 사용자의 감성에 좋은 영향을 주어서 휴식 및 운동에 효과적인 감성조명을 나타낼 수 있을 것이다.