• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1798-1803
• /
• 2003

In this work the dynamic heat transfer occurring in a cable penetration fire stop system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealants. The dynamic heat transfer can be described by a partial differential equation (PDE) and its initial and boundary conditions. For the shake of simplicity PDE is divided into two parts; one corresponding to the heat transfer in the axial direction and the other corresponding to the heat transfer on the vertical layers. Two numerical methods, SOR (Sequential Over-Relaxation) and FEM (Finite Element Method), are implemented to solve these equations respectively. The axial line is discretized, and SOR is applied. Similarly, all the layers are separated into finite elements, where the time and spatial functions are assumed to be of orthogonal collocation state at each element. The heat fluxes on the layers are calculated by FEM. It is shown that the penetration cable influences the temperature distribution of the fire stop system very significantly. The simulation results are shown in the three-dimensional graphics for the understanding of the transient temperature distribution in the fire stop system.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.1
• /
• pp.61-72
• /
• 2011

As the customer's needs for diverse colors, the process of bus painting shop is becoming more and more complex. In particular, frequent changes of paint colors in each spray process require the cleaning of the painting nozzles and setting them up for the new paints, which results in increased time and cost and reduced production. This also increases environmental influences. This paper proposes, as a solution to this issue, the use of color selection field (CSF). CSF is physically a system of conveyors that are used to rearrange objects in a flow line. CSF is proposed, in this paper, to be introduced right before the spray process so that buses are better grouped according to their desired colors. Various parameters of the CSF, such as the number of conveyors and algorithms to determine the rearranged sequence of buses, have been determined by running simulations using the digital manufacturing technology, and investigating the simulation results. As an outcome of the proposed solution, the CSF system is expected to reduce approximately 30% of the nozzle cleaning cost for a Korean motor company case, which will not only benefit the company economically, but will also benefit the environment.

• Journal of Computational Design and Engineering
• /
• v.3 no.3
• /
• pp.286-294
• /
• 2016

In this paper we present an efficient technique for sketch-based 3D modeling using automatically extracted image features. Creating a 3D model often requires a drawing of irregular shapes composed of curved lines as a starting point but it is difficult to hand-draw such lines without introducing awkward bumps and edges along the lines. We propose an automatic alignment of a user's hand-drawn sketch lines to the contour lines of an image, facilitating a considerable level of ease with which the user can carelessly continue sketching while the system intelligently snaps the sketch lines to a background image contour, no longer requiring the strenuous effort and stress of trying to make a perfect line during the modeling task. This interactive technique seamlessly combines the efficiency and perception of the human user with the accuracy of computational power, applied to the domain of 3D modeling where the utmost precision of on-screen drawing has been one of the hurdles of the task hitherto considered a job requiring a highly skilled and careful manipulation by the user. We provide several examples to demonstrate the accuracy and efficiency of the method with which complex shapes were achieved easily and quickly in the interactive outline drawing task.

• Journal of Environmental Science International
• /
• v.25 no.2
• /
• pp.267-280
• /
• 2016

Ground echo is radar return from stationary targets such as buildings and trees. Wind vectors from the wind profile radar in Gangneung are affected by ground echoes due to the complex mountainous terrain located to the west and the south. These ground echoes make a spurious peak close to the direct current (DC) line signal in Doppler spectra. Wind vectors polluted by ground clutters were determined from spectra of oblique beams. After eliminated the terrain echoes, the accuracy of wind vector compared with radiosonde was improved about 68.4% and its relative coefficient was increased from 0.58 to 0.97.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05a
• /
• pp.66-70
• /
• 2001

The partial discharge testing is widely used in diagnostic measuring technology because it gives low stress to power equipment which is undertaken tests. Therefore it is very useful method compare to previous destructive methods and effective diagnosis method in power system that requires on-line/on-site diagnosis. But partial discharges have very complex characteristics of discharge pattern, so it is required continuous research to development of precise analysis method. In recent, the study of partial discharge is carrying out discover of initial defect of power equipment through condition diagnosis and system development of degradation diagnosis using HFPD(High Frequency Partial Discharge) detection. In this study, simulated system is manufactured and HFPD occurred from those simulator is measured with broad-band antenna in real time, the degradation grade of system is analyzed through produced patterns in simulated target according to the AI/statistics processing.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.4 s.142
• /
• pp.299-306
• /
• 2005

To determine a guidance law which is suitable for Target Tracking System(TTS) of an underwater vehicle, the performance (hitting probability) of TTS were calculated with four different guidance schemes, considering underwater vehicle's manoeuvrability and characteristics of seeking equipment such as sonar To evaluate the performance of TTS with each guidance law, numerous target-tracking simulations of underwater vehicle were performed under the condition of target's various motion scenario. Furthermore, the effect of sonar characteristics to the performance of guidance law in TTS was studied by changing parameters of sonar such as frequency of ping and detecting error of target. The pursuit-tail guidance law showed the best performance among four different guidance laws. Complex motion of target from straight line to turning circle and zigzag movement, low frequency of sonar ping and large detecting error of target decreased the hitting probability.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.5
• /
• pp.471-479
• /
• 2006

Automatic transfer equipments of manufacturing and process line trend toward big size as LCD glass is big size, heavy weight. The conventional stocker uses rotational motor and mechanical power converter device as travel axis of stocker crane and then frequent maintenances by complex structure and mechanical friction are required. Also it has problem to minimize the particle generation. To solve these problems, this paper verified the performance of permanent magnet(PM) excited transverse flux linear motor(TFLM) that is big power density per unit volume applied for travel axis of 7 generation stocker that is being big size, high power, long distance by the experiment based on proposed control algorithm, controller and power converter device.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.160-163
• /
• 1993

In this paper, design of an automatic grinding robot system for car brazing bead is introduced. Car roof and side panels are joined using brazing, and then the brazing bead is processed so that the bead is invisible after painting. Up to now the grinding process is accomplished manually. The difficulties in automation of the grinding process are induced by variation of position and shape of the bead and non-uniformity of the grinding area due to surface deformation. For each car, the grinding area including the brazing bead is sensed and then modeled using a 2-D optical sensor system. Using these model data, the position and the direction of discrete points on the car, body surface are obtained to produce grinding path for a 6 degrees of freedom grinding robot. During the process, it is necessary to sense the reaction forces continuously to prepare for the unexpected circumstances. In addition, to meet the line cycle time it is necessary to reduce the required time in sensing, signal processing, modeling, path planning and data transfer by utilizing real-time communication of the information. The key technique in the communication and integration of the complex information is obtaining in-field reliability. This automatic grinding robot system may be regarded as a jump in the intelligent robot processing technique.

• The Research Journal of the Costume Culture
• /
• v.15 no.5
• /
• pp.749-759
• /
• 2007

As the traditional style is treated as one of the important themes in fashion recently, how to apply the formative character in Korean and Japanese traditional dress to modern fashion is searched through actual analysis of photograph material, Both design formative elements were confirmed by clothing and fashion department majors through visual data so that 20 pieces of them were selected as final analysis object. Korean traditional dress form in modern fashion emphasizes curvaceousness as plane division. On the other hand, that of Japanese shows straight line, layered, belt, big look through up & down connection style. Color in Korean traditional dress prefers white and original color and modern fashion displays the natural beauty through harmony of similar colors ; that of Japanese based on natural color such as persimmon color cherishes natural beauty and implicit moderation showing harmony of various original color with brilliance and neutral color. While texture in Korean traditional dress was fine and exquisite, that of Japanese preferred coarse and tactile ones. In motif, Korea was natural and geometric but Japanese variously used complex and geometric ones. Likewise, the result suggests that the formative character in Korean and Japanese modern fashion affects the modern dress format as new aesthetic sense and takes on more complicated and subtle aspect in basic form, not just use so far.

• Journal of Broadcast Engineering
• /
• v.9 no.3
• /
• pp.207-213
• /
• 2004

The layered depth image (LDI) is an efficient approach to represent three-dimensional objects with complex geometry for image-based rendering (IBR). LDI contains several attribute values together with multiple layers at each pixel location. In this paper, we propose an efficient preprocessing algorithm to compress depth information of LDI. Considering each depth value as a point in the two-dimensional space, we compute the minimum distance between a straight line passing through the previous two values and the current depth value. Finally, the minimum distance replaces the current attribute value. The proposed algorithm reduces the variance of the depth information , therefore, It Improves the transform and coding efficiency.