• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.877-882
• /
• 2005

The definition of multi-coupled operation is that coupled two trainsets is able to be operated one trainset identically. That is to say, the one driver, coupled two trainsets can operate the traction and braking system, control vehicle doors, phanto-graph, HVAC and passenger room lighting system etc, such as one trainset controlling. This study will provide high speed train design engineer with introducing multi-coupled operation system electrically and presentation automatic complex coupler mechanism, and then this paper will be applied to design next generation high speed train system such as Jun-la/Ho-nam line

• Nuclear Engineering and Technology
• /
• v.50 no.4
• /
• pp.582-588
• /
• 2018

Accident diagnosis is one of the complex tasks for nuclear power plant (NPP) operators. In abnormal or emergency situations, the diagnostic activity of the NPP states is burdensome though necessary. Numerous computer-based methods and operator support systems have been suggested to address this problem. Among them, the recurrent neural network (RNN) has performed well at analyzing time series data. This study proposes an algorithm for accident diagnosis using long short-term memory (LSTM), which is a kind of RNN, which improves the limitation for time reflection. The algorithm consists of preprocessing, the LSTM network, and postprocessing. In the LSTM-based algorithm, preprocessed input variables are calculated to output the accident diagnosis results. The outputs are also postprocessed using softmax to determine the ranking of accident diagnosis results with probabilities. This algorithm was trained using a compact nuclear simulator for several accidents: a loss of coolant accident, a steam generator tube rupture, and a main steam line break. The trained algorithm was also tested to demonstrate the feasibility of diagnosing NPP accidents.

• Journal of Photoscience
• /
• v.7 no.1
• /
• pp.21-26
• /
• 2000

The photoemission and excitation spectra of cis-[Cr(cyclam)F$_2$]ClO$_4$ (cyclam = 1,4,8,11-tetraazacy-clotetradecane) taken at 77 K are reported. The 298 K mid- and far-infrared spectra are also measured. The vibrational intervals of the electronic ground state are extracted from the far-infrared and emission spectra. The ten electronic bands due to spin-allowed and spin-forbidden transitions are assigned. The zero-phonon line In the excitation spectrum splits into two components by 169 cm$^{1}$, and the large $^2$E$_{g}$ splitting can be reproduced by the ligand field theory. According to the ligand field analysis, we can confirm that nitrogen atoms of the cyclam ligand have a strong c-donor character, and fluoride ligand also has strong $\sigma$- and $\pi$-donor properties toward chromium(III) ion.n.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.201-204
• /
• 2006

A three-dimensional finite element (FEM) model has been developed to simulate the deformation due to bead on plate welding of curved plates with curvature in the weld direction. By using traditional method such as thermal-elastic-plastic FEM, the weld-induced deformation can be predicted accurately. However, this method is not practical approach to analyze the deformation of large and complex structures such as ship hull structures in view of time and cost. This study is classified from the aspect of equivalent load based on inherent strain near the weld line. Therefore, the residual deformation can be simply computed by elastic analysis. Further more, a practical solution is proposed to consider the contact between the plate and the positioning jig by judging the reaction forces of the jig at calculation step and the effect of the longitudinal curvature is closely considered.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.1
• /
• pp.7-14
• /
• 1983

Linear feature such as lines and curves are one of important features in image processing. In this paper, new method of linear feature detection is suggested. Also, we have studied approximation technique which transforms detected linear feature into data structure for the practical. This method is based on graph theory and principle of this method is based on minimal spanning tree concept which is widely used in edge linking process. By postprocessing, Hairs and inconsistent line segments are removed. To approximate and describe traced linear feature, piecewise linear approximation is adapted. The algorithm is demonstrated through computer simulations.

• Journal of electromagnetic engineering and science
• /
• v.1 no.2
• /
• pp.139-145
• /
• 2001

In this paper, a coaxial sample holder is proposed with its de-embedding and parameter extraction procedure. The S-parameters were measured up to 1 GHz using network analyzer, HP8753D, and N-type connector together with the de-embedding of N-type connector. The proposed de-embedding procedure is performed to extract electrical parameters of blood glucose, which gives the permittivity of blood glucose. We also analyzed the error of extracted parameters, which are caused by instrument error and geometrical error. Using these error analyses, we reduced the error factors of extracted parameters. We extracted electrical parameters of glucose samples through these all extraction procedure and confirmed the possibility of glucose diagnosis system based on microwave system.

• Journal of Families and Better Life
• /
• v.20 no.5
• /
• pp.69-85
• /
• 2002

The purpose of this study was to develop a scheme to standardize apartment management expenses levy. I have conducted theoretical research on the literature for the foundation of this study. I have also surveyed many different kinds of levies with help from several apartment complex managers in Busan as well as the executive secretaries of Busan Citizen's Coalition for Economic Justice. I held 30 meetings with the experts in this process to discuss the standardization of the levy. The finalized scheme for standardization is in line with the Act for Management of Multiple Family Housing. Because description of the whole standardized scheme is too lengthy for one article, I decided to present it in three parts. This article is the first part of the series. The remaining two parts will be published in future issues.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.15-17
• /
• 2006

This paper presents a new global intensity compensation method for extracting moving object in a visual surveillance system by compensating time variant intensity changes of background region. The method that compensates a little changes of intensity due to time variant illumination change and automatic gain control of camera is called global intensity compensation. The proposed method expresses global intensity change with a mapping table to describe complex form of intensity change while the previous method models this global intensity change with a simple function as a straight line. The proposed method builds the mapping table by calculating the cross histogram between two images and then by selecting an initial point for generating the mapping table by using Hough transform applied to the cross histogram image. Then starting from the initial point, the mapping table is generated according to the proposed algorithm based on the assumption that reflects the characteristic of global intensity change. Experimental results show that the proposed method makes the compensation error much smaller than the previous GIC method

• Journal of applied mathematics & informatics
• /
• v.29 no.1_2
• /
• pp.451-457
• /
• 2011

The function f(z) = $e^{p(z)}$ where p(z) is a polynomial of degree n has 2n Julia lines. Julia lines of $e^{p(z)}$ divide the complex plane into 2n equal sectors with the same vertex at the origin. In each sector, $e^{p(z)}$ has radial limits of 0 or innity. Main results of the paper are concerned with maximum curves of $e^{p(z)}$. We deal with some properties of maximum curves of $e^{p(z)}$ and we give some examples of the maximum curves of functions of the form $e^{p(z)}$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.5
• /
• pp.837-846
• /
• 2004

This paper presents a screening technique for greatly reducing the computation involved in determining the optimal location and types of Flexible AC Transmission System (FACTS) devices in a large power system. The first-order sensitivities of the generation cost for various FACTS devices are derived. This technique requires solving only one optimal power flow (OPF) to obtain sensitivities with respect to FACTS device control variables for every transmission line To implement a sensitivity-based screening technique, we used a new UPFC model, which consists of an ideal transformer with a complex turns ratio and a variable shunt admittance. A S-bus system based on the IEEE 14-bus system was used to illustrate the technique.