• 한국멀티미디어학회논문지
• /
• 제3권4호
• /
• pp.407-415
• /
• 2000

설비 집약적이며 복잡한 생산 시스템중의 하나인 반도체 FAB 공정은 제품의 흐름시간과 대기시간, 공정 중 재고를 줄이는 것이 흐름제어의 가장 중요한 목표이다. 이에 본 연구에서는 소품종 다랑 생산 시스템에서 발생하는 비경제성을 줄이고 생산성을 향상시키기 위하여 현재 반도체 양산 회사에서 주로 채택하고 있는 In-Line Layout을 분석하고 새로운 제안 방식인 그룹테크놀로지를 이용한 Job Shop 형태의 Stand Alone Layout과 함께 각각의 모델로 구축하고 시뮬레이션 함으로써 일별 생산 계획상의 회수 변화에 따른 각Layout의 특성을 비교, 분석하였다. 이 때 사용한 시뮬레이션 툴은 모델 구축 및 시뮬레이션이 용이하고 범용적인 (이산형 제조 시스템용) ProSys를 사용하였다. 연구 결과로는 일별 생산 계획상의 회수 초기에는 In-Line Layout이 Stand Alone Layout보다 대체로 생산량 측면에서 우세하지만 일별 생산계획상의 회수가 증가된 14회부터는 Stand Alone Layout이 더 우세한 것으로 나타났다

• 분석과학
• /
• 제15권6호
• /
• pp.496-501
• /
• 2002

Electrolyte cathode atomic discharge (ELCAD)는 용액 중에 포함된 미량 중금속을 연속 자동적으로 측정하기 위한 새로운 광학 측정기로서 플라스마에 의한 중금속들의 방출 강도를 측정하는 원자방출 분광법의 하나이다. 특히 이 방법은 검액을 전처리하지 않고 직접 분석할 수 있기 때문에 온라인 (on-line) 현장분석이 가능하다. ELCAD에서는 분위기 가스로 공기를 이용하고, 양극부분에 백금 전극을 사용하며, 음극에서는 연속적으로 전해질 시료를 주입하면서 플라스마를 형성하면서 미량의 중금속을 분석할 수 있다. 액상 글로우 방전의 기초 특성 연구로는 철의 원자 방출선 세기를 구한 다음 Einstein-Boltzmann식을 사용하여 플라스마 온도를 구한 다음 구리, 납, 철 및 니켈의 미량 분석 및 간섭 현상에 대해서 연구하였고, 검출 한계를 구하였다.

• Corrosion Science and Technology
• /
• 제12권2호
• /
• pp.79-84
• /
• 2013

In general, pipelines at nuclear power plants are affected by various types of degradation mechanisms and may be ruptured after gradually thinning. FAC (Flow-Accelerated Corrosion) is typical aging mechanism affecting the secondary side piping system. In Korea nuclear power plants, CHECWORKS program have been used for management of wall thinning damages. However, sometimes, CHECWORKS program shows wrong results at the stage of NFA (Network Flow Analysis) in case of complex pipelines. This paper describes the calculation results of pressure drop in a complex pipeline and single line by using the CHECWORKS program and the analysis results are compared with those of engineering calculation results including errors between them.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 추계학술대회 논문집
• /
• pp.301-305
• /
• 2001

Conventionally, robot control algorithms are divided into two stages, namely, path or trajectory planning and path tracking(or path control). This division has been adopted mainly as a means of alleviating difficulties in dealing with complex, complex, coupled manipulator dynamics. The minimum-time manipulator control problem is solved for the case when the path is specified and the actuator torque limitations are known. In path planning, DP is applied to applied to find the shortest path form initial position to final position with the assumptions that there is no obstacle and that each path is straight line. In path control, the phase plane technique is applied to the minimum-time control with the assumptions that the bound on each actuator torque is a function of joint position and velocity or constant. This algorithm can be used for any manipulator that has rigid link, known dynamics equations of motion, and joint angles that can be determined at a given position on the path.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.210-220
• /
• 2005

We have analyzed the stability for cut-slopes at main street 3-2 line section in Pa-ju local industrial complex. After studying an additional boring test, laboratory test and face mapping etc., we have determined the extent of reinforcement, slope inclinations and soil strength parameter from the analysis of test results. After changing the inclination of slopes for ground limit and carrying out the analysis of slope stability, we applied the Mass Nailing Method to the site because of need for reinforcement to soil and weathered rock slopes. In slope for soft and hard rock sections, we also reinforced the sections that are difficult to obtain the safety without reinforcement in alteration zone.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1626-1631
• /
• 2010

The characteristics of electric current for the voltaic cell are important for electric power applications. In this paper, an electrical equivalent model consist of three resisters and a capacitance for the Cu/NaCl solution/Zn electrochemical cell is proposed. The capacitance which exists in the Zn electrode/electrolytic interface increased according to Zn electrode area, but cannot affect almost in electric current. Complex impedance plot was used to analysis the interface effect for Zn/electrolyte. This result shows that the interface is similar with the electric transmission line. The short current measurements were conducted to investigate the effects of hydrogen peroxide, the watery sulfuric acid and NaCl aqueous solution. As the hydrogen peroxide increased, the electric current increased because the hydrogen gas being converted with the water. Also electric current increased significantly with increase of the hydrogen ion with the watery sulfuric acid and increased with increase of $Na^+$ ion and $Cl^-$ion in the NaCl electrolyte.

• 한국정보통신학회논문지
• /
• 제4권2호
• /
• pp.357-363
• /
• 2000

가시거리 환경에서 수신 전계강도는 반사매질의 전기적 특성에 의해 변화한다. 매질의 전기적 특성을 구하기 위해 안테나의 편파특성에 대한 반사계수 식과 매질에 대한 복소 유전상수의 관계식을 유도하고 수신전력 식을 이용하여 반사계수와 송수신전력의 관계를 원의 방정식으로 표현하였다. 그리고 측정된 전계강도로부터 매질의 전기적 특성을 구하는 알고리즘을 제시하였다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.253-257
• /
• 2009

Along with emergence of recent issues such as 'minimization of energy consumption' and 'natural environment and human health' amid the flow of requirements for nature-friendly architecture, attempts for boundary, which has a variety of possibilities as the intermediate territory between interior and exterior space of the architecture, have been pursued actively. On the ground of close relationships between urban area and architecture in a modern society, the boundary between interior and exterior is being exhibited in a wide variety of way of expressions, not as a single plane any longer. In line with this, researcher analyzed interior and exterior boundary according to its type targeting modern housing complex in Europe, and also investigated characteristics thereof. And, having provided the results as basic materials in order to seek amenity of local apartment houses and diversification of housing plan as well, the researcher intends to be of a help to bring physical changes in both building and exterior design, and also to give a new meaning in an environment-friendly aspect.

• Journal of Mechanical Science and Technology
• /
• 제15권2호
• /
• pp.172-179
• /
• 2001

The effects of the interface and two holes located near the crack path in the hybrid specimen on the dynamic crack propagation behavior have been investigated using dynamic photoelasticity with the aid of Cranz-Shardin type high speed camera system. The dynamic stress field around the dynamically propagating interface crack tip in the three point bending specimens under a dynamic load applied by a hammer dropped from 0.6m high without initial velocity are recorded. The complex stress intensity factors for the dynamically propagating interface crack are extracted by using a overdeterministic least square method. Theoretical dynamic interface isochromatic fringe loops generated by using the numerically determined complex stress intensity factors are compared with the experimental results. Furthermore, the influence of the hole to the dynamic interface crack velocities has been investigated experimentally.

• Rapid Communication in Photoscience
• /
• 제2권1호
• /
• pp.34-37
• /
• 2013

Two novel antenna complexes of $Eu^{III}$ with 1-naphthoic acid (NA) as primary ligand and two aromatic N-donor ligands namely N-hexyl-N-(pyridin-2-yl) pyridin-2-amine (1) and 4-((dipyridin-2-ylamino)methyl)benzoic acid (2) have been synthesized and characterized by various spectroscopic techniques. The room-temperature (298 K) photoluminescence spectrum of $Eu^{III}$ complexes composed of typical line like emissions, assigned to transitions between the first excited state $^5D_0$ to the $^7F_J$ (J = 0-4), resulting in red emission along with the residual emission from the 1-naphthoic acid moiety in the blue region. The determined CIE color coordinate value for the complex 2 is (x = 0.36, y = 0.34), which is in white region.