• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1327-1334
• /
• 2009

According to the construction plan of Samcheok electric power complex from year 2009 to year 2020, many people are interested in this area. This national project which invests about 8.6 trillion won will have great influence to rail transport considering current depression days. Samcheok electric power complex will be the largest plan in Korea, and it is necessary to have railroad construction plan as soon as possible considering the route change of domestic coal transport and the possibility of coal transport by rail from North Korea, Russia and China after reunification of Korean peninsula. Also, Samcheok electric power complex will be located in the east area railroad route and it is important to study about this area. This study will mention about the railroad route of east sea north line and Pohang $\sim$ Samcheok line, and review the prospect and strengthening method of coal transport by railroad according to the construction of Samcheok electric power complex.

• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.32-38
• /
• 2014

The hydraulic fuse, which responds to the suddenly increased flow on rupture of a line and shuts off the fluid flow, would prevent large spillage of liquid. The quick-acting hydraulic fuse, which is mainly composed of a poppet, a seat, and a spring, must be designed to minimize the leaked flow and to prevent high collision speed between the poppet and seat during fuse operation on a line rupture. The optimal design parameters of a quick-acting hydraulic fuse were searched using the genetic algorithm and the complex method that are kinds of constrained direct search methods. The dynamic behavior of a quick-acting hydraulic fuse was researched using computer simulations that applied the obtained optimal design parameters.

• Transactions of Materials Processing
• /
• v.15 no.6 s.87
• /
• pp.459-466
• /
• 2006

Trimming line design plays an important role in obtaining accurate edge profile after flanging. Compared to the traditional section-based method, simulation-based method can produce more accurate trimming line by considering deformation mechanics. Recently, the use of a finite element inverse method is proposed to obtain optimal trimming line. By analyzing flanging inversely from the final mesh after flanging, trimming line can be obtained from initial mesh on the drawing die surface. Initial guess generation fer finite element inverse method is obtained by developing the final mesh onto drawing tool mesh. Incremental development method is adopted to handle irregular mesh with various size and undercut. In this study, improved incremental development algorithm to handle complex shape is suggested. When developing the final mesh layer by layer, the algorithm which can define the development sequence and the position of developing nodes is thoroughly described. Flanging of front fender is analyzed to demonstrate the effectiveness of the present method. By using section-based trimming line and simulation-based trimming line, incremental finite element simulations are carried out. In comparison with experiment, it is clearly shown that the present method yields more accurate edge profile than section-based method.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.29-37
• /
• 2015

In this paper, we propose a robust pre-processing module for camera-based Optical Music Score Recognition (OMR) on mobile device. The captured images likely suffer for recognition from many distortions such as illumination, blur, low resolution, etc. Especially, the complex background music sheets recognition are difficult. Through any symbol recognition system, the staff line height and staff line space are used many times and have a big impact on recognition module. A robust and accurate staff line height and staff line space are essential. Some staff line height and staff line space are proposed for binary image. But in case of complex background music sheet image, the binarization results from common binarization algorithm are not satisfactory. It can cause incorrect staff line height and staff line space estimation. We propose a robust staff line height and staff line space estimation by using run-length encoding technique on edge image. Proposed method is composed of two steps, first step, we conducted the staff line height and staff line space estimation based on edge image using by Sobel operator on image blocks. Each column of edge image is encoded by run-length encoding algorithm Second step, we detect the staff line using by Stable Path algorithm and removal the staff line using by adaptive Line Track Height algorithm which is to track the staff lines positions. The result has shown that robust and accurate estimation is possible even in complex background cases.

• BMB Reports
• /
• v.43 no.11
• /
• pp.766-771
• /
• 2010

The biological evaluation of a new synthesized Pt(II)-complex, 2,2'-bipyridin Butylglycinato Pt(II) nitrate, an anti-tumor component, was studied at different temperatures by fluorescence and far UV circular dichroism (CD) spectroscopic methods. Human serum albumin (HSA) and human tumor cell line K562 were as targets. The Pt(II)-complex has a strong ability to quench the intrinsic fluorescence of HSA. Binding and thermodynamic parameters of the interaction were calculated by fluorescence quenching method. Far-UV-CD results showed that Pt(II)-complex induced increasing in content of $\alpha$ helical structure of the protein and stabilized it. The 50% cytotoxic concentration ($Cc_{50}$) of complex was determined using MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide) assay at different incubation times. Also, fluorescence staining with DAPI (4,6-diamidino-2-phenylindole) revealed some typical nuclear changes, which are characteristic of apoptosis. Above results suggest that Pt (II) complex is a promising anti-proliferative agent and should execute its biological effects by inducing apoptosis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.12
• /
• pp.2196-2201
• /
• 2007

Materials used at microwave are usually used as a dielectric with a manufacturing purpose of printed circuit boards, etc. Complex permittivity of them can be measured from attenuation constant or propagation constant of a transmission line using a microstrip line with bulk type. But as the technique recently which can manufacture to have complex permittivity and permeability demanded using nonferrous metals for powder-type grows up, we need sensors and methods which can measure characteristics of powder-type materials. So far measuring methods of permittivity and permeability with waveguide or coaxial cable are used but they have faults which have a complex measurement method and are difficult to simultaneously measure permittivity and permeability. In this paper, a simultaneous measuring method of permittivity and permeability with 2-port coaxial cable and a new proposed calculation. The proposed 2-port coaxial cable is designed to be easy to insert materials and to have a wideband. We measure permittivity and permeability of magnetic powder(Ni-Fe-Mo, Ni-Fe) which reveal its characteristic at $0.3{\sim}1.3GHz$ to identify the proposed sensor.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.28-30
• /
• 2003

Probabilistic Load Flow(PLF) solution based on the method of moments is used for security assessment of bus voltages in power systems. Bus voltages, line currents, line admittances, generated real and reactive power, and bus loads are treated as complex random variables. These complex random variables are known in terms of probability density functions(PDF). Also, expressions for the convolutions of complex random variables in terms of moments and cumulants have been derived. Proposed PLF solution using the method of moments is fast, because the process of convolution of various complex random variables is performed in moment and cumulant domain. Therefore, the method is applied to security assessment of power systems in this paper. Finally, system operator also can be used information of security assessment to improve reliability of power systems.

• Industrial Engineering and Management Systems
• /
• v.7 no.2
• /
• pp.160-170
• /
• 2008

This paper proposes a mathematical model for converting conveyor assembly line to cellular manufacturing in complex production environments. Complex production environments refer to the situations with multi-products, variant demand, different batch sizes and the worker abilities varying with work stations and products respectively. The model proposed in this paper aims to determine (1) how many cells should be formatted; (2) how many workers should be assigned in each cell; (3) and how many workers should be rested in shortened conveyor line when a conveyor assembly line should be converted, in order to optimize system performances which are defined as the total throughput time and total labor power. We refer the model to a new production system. Such model can be used as an evaluation tool in the cases of (i) when a company wants to change its production system (usually a belt conveyor line) to a new one (including cell manufacturing); (ii) when a company wants to evaluate the performance of its converted system. Simulation experiments based on the data collected from the previous documents are used to estimate the marginal impact that each factor change has had on the estimated performance improvement resulting from the conversion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.224-236
• /
• 2017

This study analyzed the characteristics of traffic accidents among elderly drivers according to area type in Gyeonggido(urban areas, urban-rural complex areas, and rural areas). Traffic accidents caused by unsafe driving are common in all three types of areas. In urban areas and urban-rural complex areas, traffic accidents were more frequent due to traffic violations and intersection accidents, while rural areas were more affected by central lines. Urban areas and urban-rural complex areas require simpler signal exposures, such as a simple straight line, left turn, or straight line and left turn signal rather than complex signal operations, such as overlaps in a signal operation. Improvement of non-signal intersections and unprotected traffic signal processing is also needed. In order to prevent the intrusion of the central line in rural areas, the center line guard rail should be prevented from penetrating the center line, and the influence of the vehicle headlamp should be reduced in the opposite direction. It is necessary to improve the visibility by using fluorescent letters to enlarge the font size of traffic signs and road signs, particularly to increase visibility at night and prevent traffic accidents at sunset. Minimal, simplified should be provided rather than complex phrases and information.

• Bulletin of the Korean Mathematical Society
• /
• v.34 no.3
• /
• pp.403-409
• /
• 1997

Let X be a closed almost complex 4-manifold with $b_2^+(X) > 1$, and have its canonical line bundle as a basic class. Then the pseudo-holomorphic 2-dimensional submanifolds in X with nonnegative self-intersection minimize genus in their homology classes.