• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1057-1058
• /
• 2011

This paper deals with finding the optimal ratio of height and length of Single-Sided Linear Induction Motors (SLIM) using Finite Element Method (FEM) for magnetic field analysis coupled with optimal design methodology. For effective analysis, FEM is conducted in time harmonic field which provides steady state performance with the fundamental components of voltage and current. The ratio of height to length providing the required output power is obtained by Response Surface Methodology (RSM) and optimal values are presented by the variation in output power. When output power is small, the ratio is high and as the power increases, the ratio shows a converged value. Considering the general application of linear motors, using a small ratio can be limiting, however, the shape ratio for maximum thrust can be identified.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.119-130
• /
• 2004

The objective of this study was to develop a school uniform sizing system with high coverage rate for middle school boys, who are in the stage of rapid growth, by identifying problems in existing school uniform sizing systems through surveys of students and uniform manufacturing companies, and analyzing juveniles' physical sizes. For this purpose. the study conducted a survey about how middle school boys choose their uniform sizes, and what complaints they have on the size of the uniforms. In addition, it was investigated what is the current state of uniform manufacturing and sizing systems through a survey of uniform companies, and the study identified problems in the size of school uniforms by comparing physical sizes of juveniles' aged 14 to 16 with the sizing systems of the companies and KS standards in 1997. Juveniles' physical data was a part of the material of the national anthropometric data in 1997. Using the two-way distribution of juveniles' height-bust girth and height-waist girth, this study established the sizing system by increasing the number of sizes for the short interval where juveniles' physical sizes are densely distributed whereas limiting the number of sizes for the long interval where juveniles' physical sizes are rarely distributed, considering the difference between companies' standard and KS' standard.

• 한국전산유체공학회:학술대회논문집
• /
• 1999.05a
• /
• pp.155-161
• /
• 1999

The three-dimensional turbulent cascade flows with and without endwall fences are numerically investigated by solving the incompressible Navier-Stokes equations with a high-Reynolds number $k-{\varepsilon}$ turbulence closure model. A projection method based algorithm is used in the finite-volume formulation, with the second order upwind-differencing scheme for the convective terms. First, assessments on accuracy of the present method are made by comparing the static pressure distributions at the mid-span of the cascade with measured data, and also by confirming the experimental observations on the choice of an optimal fence height for the secondary flow control. In understanding the three-dimensional nature of the secondary flow in turbine cascade, the limiting streamline patterns and the static pressure contours at the suction surface of the blade as well as on the cascade endwall are employed to visualize the effectiveness of the endwall fence for the secondary flow control. Analysis on the streamwise vorticity contour maps along the cascade with the three-dimensional representation of their iso-surfaces reveals the strucuture of the complicated vortical flow in the turbine cascade with endwall fence, and also leads to an understanding on formation of the counter-rotating streamwise vortex over the endwall fence, in explaining the mechanisms of controlling the secondary flow and also for the proper selection of an optimal fence height.

• Journal of Environmental Science International
• /
• v.31 no.5
• /
• pp.389-404
• /
• 2022

The purpose of this study is to evaluate the vegetation recovery status of Mudeungsan National Park Jungmeorijae, Jeungsimsa district restoration site, and the Shimwon Valley ecological landscape restoration site in Jirisan National Park. Compared to the control plots, the Jungmeorijae restoration site was analyzed to have height growth of about 73.5%, the average species diversity index of about 75.2%. and the average similarity index was recovered to 7.75%. In the case of the restoration site in Jeungsimsa district, the height growth compared to the control plots was about 69.2%, the average species diversity index was about 55.0%. and the average similarity index was recovered to 25.65%. In the case of the Shimwon Valley ecological landscape restoration area, the height growth compared to the control plots was about 32.6%, the average species diversity index about 176.7%. and the average similarity index was recovered to 0.85%. The restoration site of the Jeungsimsa district was planted with relatively large trees during restoration work, and it took a relatively long time(20 years). Also, the site had less limiting factors due to the low elevation, allowing the degree of vegetation recovery to be higher than that of other sites.

• Journal of the KSME
• /
• v.29 no.3
• /
• pp.244-252
• /
• 1989

평면변형조건에서 성형한계를 빠르고 정확하게 측정할 수 있는 방법을 개발하는 것도 중요하다. 평면변형조건에서의 성형한계를 구하는 데에는 펀치 스트레칭이 주로 이용되지만 그 외에도 여러 가지 방법들이 시도되고 있다. 평면변형조건에서 펀치스트레칭 시험을 행하여 파단이 일 어날 때까지의 펀치 행정거리를 한계 돔 높이(limiting dome height)라 하여 선진 제국에서는 박판금속의 성형성에 대한 품질관리 수단으로서 이용하고 있다. 우리나라의 박판금속의 성형 업계에서도 새로운 공정의 개발에 있어서 성형한계도와 변형측정법을 이용하므로서 시행착오를 줄이고, 한계돔 높이에 의한 품질관리기법을 이용하므로서 불량율저감 및 생산성 향상을 기할 필요가 있다 하겠다. 각종 재료에 대하여 측정한 성형한계에 관한 자료는 그 대표적인 값(예를 들면, 평면변형에서의 성형한계 값)으로서 컴퓨터에 저장하여두면 성형성에 대한 CAE에 의한 분석시에 편리하게 이용될 수 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.3 no.2
• /
• pp.60-67
• /
• 1979

Aerodynamic forces acting on a curved blade are computed theoretically taking into account the variation of wind speed over the blade to investigate the performance of a vertical axis wind rotor. It is shown that the rotor does not self start at the rated wind speed without a supplementary starting device and that most of the power output is contributed by the central portion of the rotor, and the use of spoilers for limiting the maximum rotational speed is needed for safety. It is also shown that provision of skew angle to the blade does not improve the starting characterstics and only reduces the maximum power output. The effects of geometric variables such as skew angle, blade solidity and ratio of the rotor height to diameter are also discussed.

• Transactions of Materials Processing
• /
• v.20 no.2
• /
• pp.167-172
• /
• 2011

The numerical simulation of the Forming Limit Diagram(FLD) test was carried out to calculate the limiting dome height(LDH: ISO12004-2) for aluminum alloy sheet Al6061-T6. The finite element analysis was used as an effective method for evaluating formability and diagnosing possible production problems in sheet stamping operations. To predict fracture during the stamping process, several failure models such as Cockcroft-Latham, Rice-Tracey, Brozzo and ESI-Wilkins-Kamoulakos(EWK) criteria were applied. The predicted results were discussed and compared with the experiments for Al6061-T6.

• Steel and Composite Structures
• /
• v.14 no.3
• /
• pp.243-265
• /
• 2013

Distortional and local buckling are important factors that influences the bearing capacity of steel-concrete composite box-beam. Through theoretical analysis of distortional buckling forms, a stability analysis calculation model of composite box beam considering rotation of steel beam top flange is presented. The critical bending moment calculation formula of distortional buckling is established. In addition, mechanical behaviors of a steel beam web in the negative moment zone subjected separately to bending stress, shear stress and combined stress are investigated. Elastic buckling factors of steel web under different stress conditions are calculated. On the basis of local buckling analysis results, a limiting value for height-to thickness ratio of a steel web in the elastic stage is proposed. Numerical examples are presented to verify the proposed models.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.123-124
• /
• 1996

Snapshots of eight SA and standard fields from low to high galactic latitudes were made using the KPNO 0.9m 2K $\times$ 2K CCD with a limiting magnitude from 19 to 22.5. The purpose of this study is to determine the vertical distribution of stars with respect to Galactic latitude and z-distance in comparison with the model simulation between intermediate population to the 'thick disk' component of scale height of a few kpc. Comparison of the preliminary results between observed and model simulation for 3 of the S fields shows good agreement both in V-mag and B- V color distributions. A bimodal distribution in B- V at high galactic latitude seems to be represented by a halo and 'thick disk' dwarf in the blue and by a normal disk dwarf population in the red.

• Transactions of Materials Processing
• /
• v.20 no.8
• /
• pp.568-574
• /
• 2011

The combination of tailor welded blank (TWB) and hot stamping often offers improved crash-worthiness and reduced mass of stamped parts in the automobile body. To investigate the formability of laser TWB and the reliability of weld line, the present study used 22MnB5 boron steel sheet of the same thickness and used the Erichsen cupping test at elevated temperatures. The effects of laser direction, die temperature, weld line positions and forming speed on formability(the limiting dome height) were studied and the results were compared with the formability of the base material.