• Nuclear Engineering and Technology
• /
• v.37 no.1
• /
• pp.109-117
• /
• 2005

Limiting conditions for operations (LCOs) are evaluated dynamically using the tool of system dynamics. The LCOs de-fine the allowed outage times (AOTs) and the actions to be taken if the repair cannot be completed within the AOT. System dynamics has been developed to analyze the dynamic reliability of a complicated system. System dynamics using Vensim software have been applied to LCOs assessment for an example system, the auxiliary feed water system of a reference nuclear power plant. Analysis results of both full power operation and shutdown operation have been compared for a measure of core damage frequency. The framework developed in this study has been shown to be very flexible in that it can be applied to assess LCOs quantitatively under any operational context of the TS in FSAR.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.5
• /
• pp.376-383
• /
• 2022

The improved performance of computer parts, such as graphic card, CPU, and main board, has led to the need for power supplies with a high power output. The dynamic load profile rapidly changes the usage of power consumption depending on load operations, such as PC power and air conditioner. Under dynamic load profile conditions, power consumption can be classified into maximum, normal, and standby power. Several problems arise in the case of maximum power. Peak power is generated at the system power source in the maximum-power situation. Frequent generation of peak power can cause high-frequency problems and reduce the life of high-pressure parts (especially high-pressure capacitors). For example, when a plurality of PCs are used, system overload occurs due to peak power generation and causes problems, such as power failure and increase in electricity bills due to exceeded contract power. To solve this problem, a system peak power limit/compensation power circuit is proposed for a power supply under dynamic load profile conditions. The proposed circuit detects the system current to determine the power situation of the load. When the system current is higher than the set level, the circuit recognizes that the system current generates peak power and compensates for the load power through a converter using a super capacitor as the power source. Thus, the peak power of loads with a dynamic load profile is limited and compensated for, and problems, such as high-frequency issues, are solved. In addition, the life of high-pressure parts is increased.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.2
• /
• pp.16-26
• /
• 2020

Improving operator performance in complex and time-critical situations is critical to maintain plant safety and operability. These situations require quick detection, diagnosis, and mitigation actions to recover from the root cause of failure. One of the key challenges for operators in nuclear power plants is information management and following the control procedures and instructions. Nowadays Digital Twin technology can be used for analyzing and fast detection of failures and transient situations with the recommender system to provide the operator or maintenance engineer with recommended action to be carried out. Systems engineering approach (SE) is used in developing a digital twin for the CEDM system to support operator actions when there is a misalignment in the control element assembly group. Systems engineering is introduced for identifying the requirements, operational concept, and associated verification and validation steps required in the development process. The system developed by using a machine learning algorithm with a text mining technique to extract the required actions from limiting conditions for operations (LCO) or procedures that represent certain tasks.

• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.306-312
• /
• 2018

There is an increasing need in the United States and around the world to move used nuclear fuel from wet storage in fuel pools to dry storage in casks stored at independent spent fuel storage installations or interim storage sites. Under normal conditions, the Nuclear Regulatory Commission limits cladding temperature to $400^{\circ}C$ for high-burnup (>45 GWd/mtU) fuel, with higher temperatures allowed for low-burnup fuel. An analysis was conducted with FRAPCON-4.0 on three modern fuel designs with three representative used nuclear fuel storage temperature profiles that peaked at $400^{\circ}C$. Results were representative of the majority of US light water reactor fuel. They conservatively showed that hoop stress remains below 90 MPa at the licensing temperature limit. Results also show that the limiting case for hoop stress may not be at the highest rod internal pressure in all cases but will be related to the axial temperature and oxidation profiles of the rods at the end of life and in storage.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.238-243
• /
• 1999

Minimum-fuel and -time orbit transfer are two major goals of the satellite trajectory optimization. In this paper, we consider satellites in two coplanar elliptic orbits when the apsidal lines coincide, and analytically find the conditions for the two-impulse minimum-time transfer orbit using Lambert's theorem. The transfer time is a decreasing function of a variable related to the transfer orbit's semimajor axis in the minimum-time case. In the minimum-time case, there is no unique minimum-time solution, but there is a limiting solution. However, there exists a unique solution in the case of minimum-fuel transfer, fur which we find analytically the necessary and sufficient conditions. As a special case, we consider when the transfer angle is one hundred and eighty degrees. In this case, we show that we obtain the classical fuel-optimal Hohmann transfer orbit. We also derive the Hohmann transfer rime and delta-velocity equations from more general equations, which are obtained using Lambert's theorem. We note the tradeoff between minimum-time and - fuel transfer. An optimal coplanar orbit maneuver algorithm to trade off the minimum-time goal against the minimum-fuel goal is proposed. Finally, the numerical simulation results are given to demonstrate the derived theory and the algorithm.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.839-849
• /
• 2023

The development of automation technology to reduce human error by minimizing human intervention is accelerating with artificial intelligence and big data processing technology, even in the nuclear field. Among nuclear power plant operation modes, the startup and shutdown operations are still performed manually and thus have the potential for human error. As part of the development of an autonomous operation system for startup operation, this paper proposes an action coordinating strategy to obtain the optimal actions. The lower level of the system consists of operating blocks that are created by analyzing the operation tasks to achieve local goals through soft actor-critic algorithms. However, when multiple agents try to perform conflicting actions, a method is needed to coordinate them, and for this, an action coordination strategy was developed in this work as the upper level of the system. Three quantification methods were compared and evaluated based on the future plant state predicted by plant parameter prediction models using long short-term memory networks. Results confirmed that the optimal action to satisfy the limiting conditions for operation can be selected by coordinating the action sets. It is expected that this methodology can be generalized through future research.

• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.877-887
• /
• 2020

A 3-Dimensional hydrodynamic and water quality model was applied to evaluate the effects of weir gate operations on water quality and harmful algal bloom (HAB) occurrences at selected locations in the Nakdong River, Geum River, and Yeongsan River. For the Geum River and Yeongsan River, when the gates are left open, annual and summer Chl-a and HABs were decreased at upstream locations, Sejong Weir and Seungchon Weir, but summer average concentrations of Chl-a and HABs were increased at downstream locations, Baekje Weir and Juksan Weir. For the open scenario, the reduced hydraulic residence time in the upper stream areas of the Geum River and Yeongsan River would allow less available time for nutrient consumption that would result in higher dissolved inorganic phosphorus concentrations followed by higher algal growth in the downstream areas. However, in the case of the Nakdong River, both annual and summer Chl-a and HABs were increased in all locations for the open scenario. This condition seems to be resulted in due to increased light availability by reduced water depths. Changes in Chl-a and HABs occurrences due to the water gate control in the study sites are different due to differences in physical, chemical, and biological conditions in each location.

• Journal of muscle and joint health
• /
• v.3 no.1
• /
• pp.37-49
• /
• 1996

The joint diseases threaten modern people's healthy life. They bring about a long pain, an anasarca, loss of joint function or even deformation and rigidity of joint, limiting people's ordinary activities much. The chronic joint patients may be subject to some hypochondria caused by anxiety for their life, social isolation, financial problem and physical disability. Therefore, this population should continue to be duely taken care of by medical personnels. In particular, nurses should adequately help these people to recover and improve their health through suitable adaptations. With such basic conceptions in mind, this study was aimed at reviewing these patients' conditions in their ordinary life before and after a plastic operation for artificial joint replacement as well as their satisfaction with their life. For this purpose, those patients who underwent some plastic operations for artificial joint replacement at university hospitals in Seoul from January 2, 1993 to June 30, 1995 were selected as the population of this study. Among them, 87 people were randomly sampled to answer a questionnaire designed specially. For the surveying tools, Jette's (1980) scale was applied to address the sample people's inconveniences experienced and supports received in their ordinary life, while the scale of Wood, Wylie & Sheafer was used to measure their satisfaction with their life. The collected data were analyzed for percentiles, means, SD, t-test and Pearson's correlations. The results of survey can be summarized as follows ; As a result of t-test the frequencies of other people's support before and after the plastic operation, it was disclosed that those who underwent the operation were supported less frequently. In addition, as a result of t-testing their satisfaction with life before and after the operation, it was found that the operation increased their satisfaction with life significantly. Meanwhile, as a result of t-test inconveniences, frequencies of supports and life satisfaction before and after the plastic operation for artificial knee replacement, it was disclosed that only the inconveniences were significantly reduced after the operation. In contrast, the t-test the variables before and after the plastic operation for artificial hip replacement, it was found that only the frequencies of other people's supports were significant reduced after the operation. Furthermore, the differences 6 months, one year and two years after the plastic operation for artificial joint replacement were t-tested on the variables. As a result, it was disclosed that people's inconvenience, frequencies of supports and life satisfaction were not improved 6 months after the operation but their frequencies of supports decreased significantly one year after, while their inconveniences and life satisfaction were significantly improved two years after. As a result of analyzing the variables with Pearson's correlations, inconveniences and frequency of supports were negatively correlated significantly with the life satisfaction. In conclusion, the plastic operation for artificial joint replacement significantly improved people's living inconveniences, reduced their frequency of other people's support and enhanced their satisfaction with life. To break don the plastic operation for artificial knee replacement improved patients' inconveniences, while the plastic operation for artificial hip replacement not only improved patients' inconveniences but reduced the frequencies of other people's support also. Finally, the finding that the plastic operation for artificial joint replacement brought about the improvement two years after suggests that this period is needed for the patients to adapt themselves to the post-operation conditions.