• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.2
• /
• pp.181-186
• /
• 2022

Dam slope RIM is a highly important contact interface where the main body and the base surface are connected. In general, when the grouting for the slope of the dam structure is designed, it is planned using limited data (drilling, geological map, etc.). This makes it very difficult to accurately consider the original ground characteristics of the slope RIM grouting target, In addition, when the grouting volume planned during the design is drilled and injected into the original ground where the waterstop is secured, there is a possibility that the original ground with the waterstop is disturbed and the effect of the waterstop is rather diminished. In order to overcome such problems, it is more suitable to first consider geological conditions and determine whether to perform optimal grouting on the original ground through on-site repair tests before performing RIM grouting. In this paper, to determine the grouting of the RIM unit, a pilot hole water pressure test was performed on the rock of the slope in the target section. The analysis shows grouting volume of 1 Lugeon or less, and the cement injection amount also shows the injection result of 1 kg/m or less. In this case, performing grouting is rather counterproductive. This result can be evaluated through a rock of which some degree of order of mass is secured, as it is a dam design standard of 1 Lugeon or less when analyzed, using the results of visual observation and geological map creation during slope cutting. Therefore, in conclusion, it is preferable to make the decision for using RIM grouting on the slope of the dam body structure, based on 1 Lugeon in a rock state, and the cement injection amount also at 1 kg/m.

• Journal of the Korean earth science society
• /
• v.44 no.1
• /
• pp.62-78
• /
• 2023

The purpose of this study is to analyze the field of Earth science at a science fair. For this purpose, 566 pieces of data spanning 21 years (2000 to 2020), acquired from entries in the Earth Science section on the science fair website, were analyzed using the semantic network method. As a result, geoscience topics have been actively explored in works submitted for the Earth Science section of the science fair. Fossils from the Cretaceous period of the Mesozoic Era were particularly predominant. Together with these, keywords corresponding to astronomy, space science, and atmospheric science formed a small-scale network. Astronomy and space science mainly dealt with the dynamic characteristics of asteroids, Venus, and Jupiter. Other subjects included the solar system, sunspots, and lunar phases. Atmospheric science has focused on atmospheric physics, atmospheric observation and analysis technology, atmospheric dynamics, air quality monitoring, while marine science has been limited to physical oceanography and geologic oceanography. This study, is expected to help select Earth Science topics and conduct inquiry activities in schools.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.795-799
• /
• 2023

The Canadian military participated in World War I and felt the limitations of the recruitment system through the continuous shortage of troops caused by the prolonged war, therefore expanded the role and scope of female manpower. The use of female manpower, which began with medical support for the first time, increased its necessity and importance as medical support personnel were dispatched overseas and women's manpower was expanded to combat support missions for the Army, Navy, and Air Force. Since then, the proportion of female manpower has been limited to 1.5% of the total number of employees at the end of the Second World War and the reduction of troops and the dismantling of the women's unit. In this situation, the Austrian Defence Force gradually accepts the recommendation of the Royal Canadian Women's Status Committee to improve the service conditions of women, marking a turning point in expanding the role of women in the Canadian military. The the Austrian Defence Force conducted long-term combat experiments to increase the proportion and role of female manpower, increasing reliability through observation and analysis to prove whether female manpower is suitable for combat troops. Korea also wants to draw implications for the future direction by comparing the history and current appearance of the Canadian military's use of female manpower with the Korean military at a time when the problem of a shortage of troops is emerging due to the recent decline in fertility and low birth rates.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.1
• /
• pp.31-46
• /
• 2023

This study classified and confirmed the learning modes about start-ups that are based on the accelerator's program which was focusing on the Korean accelerators in the ICT field targeting global market. Eight accelerator practitioners were interviewed who were in charge of operating programs for accelerators, qualitatively analyzing method of the interview was conducted. The interview results to identify various learning modes that accelerators provide to startups through programs. In order to identify and classify learning modes, the researcher reviewed various prior documents and using categories of experience accumulation, observation, experimentation, trial and error, and improvisation as a priori code for the qualitative analysis. The interview results were analyzed through a subject analysis. As the result of the study, the learning modes offered by the accelerator's programs to startups were confirmed, with two subcategories identified for each of the five categories: experiential, learning from others, experimental, trial and error, and improvisation. Given the limited research on accelerator programs and their main function, the main function of accelerators, this study identified the types of learning modes that offered by the accelerator's programs to startups from the perspective of learning. This study provides important insights into the types of learning modes that offered by the accelerator programs, which can help to improve our understanding of how accelerators support organizational learning for startups. Additionally, this information can be useful for startups considering in participating in the accelerator programs, as it can help them making informed decisions about their involvement.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.26 no.1
• /
• pp.75-88
• /
• 2024

It would be advantageous to predict acreage and yield of crops in major grain-exporting countries, which would improve decisions on policy making and grain trade in Korea. A climate suitability model can be used to assess crop acreage and yield in a region where the availability of observation data is limited for the use of process-based crop models. The objective of this study was to determine the climate suitability index of wheat by province in Ukraine, which would allow for the spatial assessment of acreage and yield for the given crop. In the present study, the official data of wheat acreage and yield were collected from the State Statistics Service of Ukraine. The EarthStat data, which is a data product derived from satellite data and official crop reports, were also gathered for the comparison with the map of climate suitability index. The Fuzzy Union model was used to create the climate suitability maps under the historical climate conditions for the period from 1970 to 2000. These maps were compared against actual acreage and yield by province. It was found that the EarthStat data for acreage and yield of wheat differed from the corresponding official data in several provinces. On the other hand, the climate suitability index obtained using the Fuzzy Union model explained the variation in acreage and yield at a reasonable degree. For example, the correlation coefficient between the climate suitability index and yield was 0.647. Our results suggested that the climate suitability index could be used to indicate the spatial distribution of acreage and yield within a region of interest.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.361-367
• /
• 2024

Ultrasound in the air is widely used in industry as a measurement technique to prevent abnormalities in the machinery. Recently, the use of airborne ultrasound imaging techniques, which can find the location of abnormalities using an array transducers, is increasing. A beamforming method that uses the phase difference for each sensor is used to visualize the location of the ultrasonic sound source. We exploit a random sparse ultrasonic array and obtain beamforming power distribution on the source in a certain distance away from the array. Conventional beamforming methods inevitably have limited spatial resolution depending on the number of sensors used and the aperture size. A high-resolution ultrasound imaging technique was implemented by applying functional beamforming as a method to overcome the geometric constraints of the array. The functional beamforming method can be expressed as a generalized beam forming method mathematically, and has the advantage of being able to obtain high-resolution imaging by reducing main-lobe width and side lobes. As a result of observation through computer simulation, it was verified that the resolution of the ultrasonic source in the air was successfully increased by functional beamforming using the ultrasonic sparse array.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.27 no.4
• /
• pp.258-265
• /
• 2024

Purpose: To date, there is no region-specific guideline for pediatric endoscopy training. This study aimed to illustrate the current status of pediatric endoscopy training in Asia-Pacific region and identify opportunities for improvement. Methods: A cross-sectional survey, using a standardized electronic questionnaire, was conducted among medical schools in the Asia-Pacific region in January 2024. Results: A total of 57 medical centers in 12 countries offering formal Pediatric Gastroenterology training programs participated in this regional survey. More than 75% of the centers had an average case load of <10 cases per week for both diagnostic and therapeutic endoscopies. Only 36% of the study programs employed competency-based outcomes for program development, whereas nearly half (48%) used volume-based curricula. Foreign body retrieval, polypectomy, percutaneous endoscopic gastrostomy, and esophageal variceal hemostasis, that is, sclerotherapy or band ligation (endoscopic variceal sclerotherapy and endoscopic variceal ligation), comprised the top four priorities that the trainees should acquire in the autonomous stage (unconscious) of competence. Regarding the learning environment, only 31.5% provided formal hands-on workshops/simulation training. The direct observation of procedural skills was the most commonly used assessment method. The application of a quality assurance (QA) system in both educational and patient care (Pediatric Endoscopy Quality Improvement Network) aspects was present in only 28% and 17% of the centers, respectively. Conclusion: Compared with Western academic societies, the limited availability of cases remains a major concern. To close this gap, simulation and adult endoscopy training are essential. The implementation of reliable and valid assessment tools and QA systems can lead to significant development in future programs.

• Atmosphere
• /
• v.12 no.4
• /
• pp.20-42
• /
• 2002

Based on the "Mid to Long Term Plan for Space Development", a project to launch COMeS (Communication, Oceanography, and Meteorological Satellite) into the geostationary orbit is undergoing. Accordingly, KMA (Korea Meteorological Administration) has defined the meteorological missions and prepared the user requirements to fulfill the missions. To make a realistic user requirements, we prepared a first draft based on the ideal meteorological products derivable from a geostationary platform and sent the RFI (request for information) to the sensor manufacturers. Based on the responses to the RFI and other considerations, we revised the user requirement to be a realistic plan for the 2008 launch of the satellite. This manuscript introduces the revised user requirements briefly. The major mission defined in the revised user requirement is the augmentation of the detection and prediction ability of the severe weather phenomena, especially around the Korean Peninsula. The required payload is an enhanced Imager, which includes the major observation channels of the current geostationary sounder. To derive the required meteorological products from the Imager, at least 12 channels are required with the optimum of 16 channels. The minimum 12 channels are 6 wavelength bands used for current geostationary satellite, and additional channels in two visible bands, a near infrared band, two water vapor bands and one ozone absorption band. From these enhanced channel observation, we are going to derive and utilize the information of water vapor, stability index, wind field, and analysis of special weather phenomena such as the yellow sand event in addition to the standard derived products from the current geostationary Imager data. For a better temporal coverage, the Imager is required to acquire the full disk data within 15 minutes and to have the rapid scan mode for the limited area coverage. The required thresholds of spatial resolutions are 1 km and 2 km for visible and infrared channels, respectively, while the target resolutions are 0.5 km and 1 km.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.172-193
• /
• 2013

This study examines the production techniques and raw materials shown in the Korean dried-lacquer statues of Buddha through a careful observation of the Seated Dried-lacquer Bodhisattva Statue from the late Goryeo Dynasty which is currently possessed by Okura Museum of Art in Tokyo. As a method of study, the X-ray data and the results from a field survey were combined to analyze the production techniques and the characteristics of raw materials. Based on this analysis, a hypothesis was established on the production process and verified through a reenactment of the actual production process. Then, the characteristics of the techniques applied to each process and the raw materials were recorded in detail. Specifically, the dried lacquer techniques and the raw materials were estimated based on the results of naked-eye observation in comparison with the literature, especially the records of "Xiu Shi Lu" written by Huang Cheng of the Ming Dynasty which is considered as 'the textbook of lacquer techniques.' The raw materials used in the production of the traditional Korean lacquerware inlaid with mother-of-pearl were also referenced. As a result, it was found that the features of production techniques and the raw materials found in the Statue at Okura Museum of Art have many similarities with those of the Seated Dried-lacquer Statue of Lohan (Arhat) from Yuanfu 2 Nian Ming (1098) of the Song Dynasty which is currently at the Honolulu Museum of Art. In particular, the similarities include that the interior of the statue being vacant because the clay and the wood core were not replaced after being removed from the prototype, that the complete form was made in the clay forming stage to apply the lacquer with baste fiber fabric, that the clay and the wood core were removed through the bottom of the statue, and that the modeling stage was omitted and the final coat over the statue is very thin. Additionally, decorating with ornaments like Bobal and Youngrak made of plastic material was a technique widely popular in the Song Dynasty, suggesting that the Seated Dried-lacquer Bodhisattva Statue in Okura Museum of Art was greatly affected by the production techniques of the Dried-lacquer Buddha Statue from the Song Dynasty. There is no precise record on the origin and history of the Korean Dried-lacquer Buddha Statues and the number of existing works is also very limited. Even the records in "Xuanhe Fengshi Gaoli Tujing" that tells us about the origin of the Dried-lacquer Buddha Statue from the Yuan Feng Period (1078~1085) do not indicate the time of transmission. It is also difficult to trace the clear route of transmission of production techniques through existing Dried-lacquer Buddha Statues. Fortunately, this study could at least reveal that the existing Dried-lacquer Buddha Statues of Korea, including the one at Okura Museum of Art, have applied the production techniques rather differently from those used in the production of Japanese Datsukatsu Dried-lacquer Buddha Statues that have been known as the standard rule in making dried-lacquer statues of Buddha for a long time.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_2
• /
• pp.1691-1707
• /
• 2022

Cheonji Lake, the caldera of Baekdu Mountain, located on the border of the Korean Peninsula and China, alternates between melting and freezing seasonally. There is a magma chamber beneath Cheonji, and variations in the magma chamber cause volcanic antecedents such as changes in the temperature and water pressure of hot spring water. Consequently, there is an abnormal region in Cheonji where ice melts quicker than in other areas, freezes late even during the freezing period, and has a high-temperature water surface. The abnormal area is a discharge region for hot spring water, and its ice gradient may be used to monitor volcanic activity. However, due to geographical, political and spatial issues, periodic observation of abnormal regions of Cheonji is limited. In this study, the degree of ice change in the optimal region was quantified using a Landsat -5/-7/-8 optical satellite image and a Modified U-Net regression model. From January 22, 1985 to December 8, 2020, the Visible and Near Infrared (VNIR) band of 83 Landsat images including anomalous regions was utilized. Using the relative spectral reflectance of water and ice in the VNIR band, unique data were generated for quantitative ice variability monitoring. To preserve as much information as possible from the visible and near-infrared bands, ice gradient was noticed by applying it to U-Net with two encoders, achieving good prediction accuracy with a Root Mean Square Error (RMSE) of 140 and a correlation value of 0.9968. Since the ice change value can be seen with high precision from Landsat images using Modified U-Net in the future may be utilized as one of the methods to monitor Baekdu Mountain's volcanic activity, and a more specific volcano monitoring system can be built.