• Journal of the Korean Geotechnical Society
• /
• v.31 no.10
• /
• pp.29-36
• /
• 2015

This paper deals with inspecting and monitoring cracks developed on a subway tunnel liner during the construction of temporary supports and excavation. The cracks have developed near a enlarged part of the tunnel. Several measurements, crack gauge, internal displacement measurement, 3-D laser scanner have been conducted to monitor the progress of cracks and effects of them on the tunnel. Local measurement, additional propagation of cracks and deformation of liner, have been conducted by crack gauge and internal displacement measurement. Global inspection has been conducted by 3-D laser scanner. From the scanned data, occurrence of global deformation of tunnel and rail has been evaluated. Because of limited sequence of construction at the ground, no apparent deformation of crack propagation has been measured. As presented in this paper, deformation of tunnel liner and effects of rail need to be investigated in view of local and global aspects.

• Fashion & Textile Research Journal
• /
• v.19 no.4
• /
• pp.504-514
• /
• 2017

Discomfort as well as muscular pain and musculoskeletal diseases occur in cases of stressed posture due to prolonged pressure. Therefore, the American Academy of Orthopaedic Surgeons (AAOS) and Pediatric Orthopaedic Society of North America (POSNA) recommend that bags that weigh no more than 15 - 20% of the wearer's weight. However, despite the prolonged pressure from using baby carriers, there are no recommendations and limited studies on how to protect wearers. Therefore, this study investigates subjective fatigue according to the usage of waist support and hip seat. Based on this, muscle fatigue and secondary subjective fatigue according to three types of currently commercial baby carriers (X-type, H-type, and H-hip type) were measured. Subjective comfortability was evaluated on a 5 point Likert-scale and subjective fatigue was evaluated on Borg's CR-10 scale. Objective muscle fatigue was also compared by measuring and analyzing electromyogram (EMG). The results of primary subjective fatigue showed statistically significant changes in the shoulders, waist, calves, and soles of the feet according to the usage of hip seats and waist support. Electromyogram measurements also showed less muscle fatigue at the upper trapezius muscle and thoracic erector spine muscle for the H-hip seat baby carrier, which has both waist support and hip seat, compared to an X-type baby carrier, which has neither. However, results of subjective fatigue showed opposite results at the waist despite having same results at the shoulders and beneath the shoulders. This show discrepancies between objective muscle fatigue and subjective fatigue; therefore, that both aspects must be taken into consideration when developing ergonomic baby carriers.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.969-976
• /
• 2013

This study suggests the improvement of ROK Navy salvage and rescue diving system. ROK Navy system experiences characteristic restrictions for the environmental loading. These restrictions are known to deteriorate the efficiency of Navy salvage and rescue diving activity. In this study, the measurements were suggested to improve the efficiency. To achieve the goal, a comprehensive analysis is conducted using the published data including those of USN, NOAA and IANTD. Based on the analysis, suggestions were made. The technical diving techniques may be introduced to improve current ROK Navy diving system in limited areas. By adopting that technique, decompression procedures and underwater operation can be improved.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.1
• /
• pp.81-88
• /
• 2020

In this paper, the performances of the electrical characteristics of the Fused Deposition Modeling (FDM) 3D-printed flexible resistance sensor was evaluated. The FDM 3D printing flexible resistive sensor is composed of flexible-material thermoplastic polyurethane and a conductive PLA (carbon black conductive polylactic acid) polymer. While 3D printing, polymer filaments heat up quickly before being extruded and cooled down quickly. Polymers have poor thermal conductivity so the heating and cooling causes unevenness, which then results in internal stress on the printed parts due to the rapidity of the heating and cooling. Electrical resistance measurements show that the 3D-printed flexible sensor is unstable due to internal stress, so the 3D-printed flexible sensor resistance curve does not match the increases and decreases in the displacement curve. Therefore, annealing was performed to eliminate the mismatch between electrical resistance and displacement. Annealing eliminates residual stress on the sensor, so the electrical resistance of the sensor increases and decreases in proportion to displacement. Additionally, the resistance is lowered in comparison to before annealing. The results of this study will be very useful for the fabrication of various devices that employ 3D-printed flexible sensor that have multiple degrees of freedom and are not limited by size and shape.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.673-685
• /
• 2020

Financial literacy is one of the sustainable development goals of huge concern of governments. Governments explore solutions addressing policies to improve financial literacy. Nevertheless, financial management has such a broad scope and is not just limited to knowledge. As human nature, individuals are born with different confidence levels that include various financial abilities. This study aims to investigate the household-financial efficacy through the application of psychometric instruments, risk preference, and demographic characteristics toward consumption decision behavior. The research is based on a survey 479 households in the peninsular Malaysia, and utilizes the structural equation model, cluster proportional and systematic random sampling, and two measurements - composite reliability and average variance extracted. Results show that households' financial efficacy is one of the critical factors that explain the households' consumption decision behavior. Also, risk preference, gender and area location (rural or urban) of the household determined the consumption decision behavior of the household. The effectiveness of consumption decision is not only determined by financial literacy, but also financial efficacy. The implications of this paper may help to design policies in narrowing the broad gap between the rural and urban level of financial efficacy. The government needs to take appropriate actions to fix it.

• The Research Journal of the Costume Culture
• /
• v.15 no.1 s.66
• /
• pp.137-151
• /
• 2007

This study was performed to narrow down the Sizing System for Female Adult's garments(KS K 0051) following age target and body shapes. The study was based on the sizing system and the anthropometric measurements, called Size-Korea, which were surveyed in the years 2003 and 2004. At first, the subjects of the survey were classified into 4 age groups, $18{\sim}24,\;25{\sim}34,\;35{\sim}49\;and\;50{\sim}59$, based on the most significant differences of body sizes. Secondly, the ranges of four key dimensions - height, bust, waist and hip-of normal sizes were identified through analyzing Rohrer index and percentile. The selected sizes within the ranges were grouped by the drop which was the subtraction of bust girth from hip girth. In conclusion, there was the most frequent drop for each age group; 9cm drop for the $18{\sim}24$ years old group, the 6cm drop for the $25{\sim}34$ years old and $35{\sim}49$ years old and 3cm drop for $50{\sim}59$ years old. The upper body garment sizes of the same drop and target ages could be merged to 10 to 12 sizes, which were remarkably smaller than the Female Adult garment sizing system, and further to 2-5 sizes, considering the percentile importance. However, $50{\sim}59$ years old group needed to be analyzed in different ways, because the number of subjects of normal size in the age decreased rapidly, that the normal sizes for them were very limited. In addition, the reference body sizes of each garment size were apparently different when they were compared to each age groups. These basic data for garment size specification could be usefully adapted for the apparel companies' own sizing system according to their age target and body shapes, to achieve efficient production and better fit.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.181-188
• /
• 2011

A small UAVs(Unmaned Aerial Vehicles) have limited by the payload capacity which requires miniaturization of a navigation system. In this paper, the performance of the lightweight and small sized AHRS(Attitude Heading Reference System), which is self-developed, is evaluated at low acceleration environment. The designed AHRS adopts the commercial low-cost MEMS sensors. A quaternion-based attitude calculation method, which eliminates singularity with relatively simple algebra, is used. In an attitude correction algorithm, the Kalman filter is used with accelerometers and magnetometers combined. The fabricated AHRS is also evaluated with reference to a COTS(Commercial Off-The-Shelf) AHRS which reports a number of successful applications to a small UAVs. The test results show that the measurements from the fabricated AHRS provide proper attitude output data with acceptable amount of differences(horizontal axis 0.5$^{\circ}$, vertical axis 1.5$^{\circ}$) in test environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8B
• /
• pp.745-751
• /
• 2002

The performance of existing CDMA-type multiple access data transmission systems is limited by interferences due to adverse mobile communication channel characteristics. Among them, the multi-user interference becomes one of the major performance degradation factors because the signal-to-signal orthogonality can be easily perturbed when numerous user signals are distorted by multipath fading channels and mixed together. In order to enhance the performance of CDMA-type systems by suppressing the multi-user interference, we have adopted chip-based cyclic prefix insertion along with adaptive one-tap DFE equalization into MC-DS-CDMA, which is known for its robustness in the frequency selective multipath fading channel environment. In order to assess the performance of the proposed system, a set of computer simulations is performed in the reverse link in which each user signal undergoes different multipath Rayleigh fading. The results show us a superior performance of our system over other CDMA systems in terms of SNR to BER measurements.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.2
• /
• pp.154-163
• /
• 2009

Incident wave angles are conventionally estimated by the directional spectrum analysis of wave data collected from in-situ sensors. The in-situ measurements are limited in monitoring incident wave angles in the wide surf zone, since the techniques are typically expensive, labor-intensive, and point-measuring. In this study, estimation of incident wave angles using wave crest features captured in digital video imagery is proposed to observe incident wave directions over the surf zone. Line signatures of wave crests having high image pixel intensities are extracted by moving an interrogation window to identify high intensity pixels in sequential video images. Wave angles are computed by taking the first derivative of the extracted crest signatures, i.e. local slope of the crest signatures in the two-dimensional physical plane. Compared to the wave angle estimates obtained by the directional spectrum analysis, video-based wave angle estimates show good agreements in general.

• Journal of Animal Science and Technology
• /
• v.60 no.9
• /
• pp.22.1-22.7
• /
• 2018

Background: Cooking temperature and consequently doneness of beef muscles are most important for the palatability and consumer acceptability. Current study assessed the response of mechanical texture of Hanwoo muscles as a function of cooking temperature at different ageing days. Six muscles (Psoas major (PM), Longissimus thoracics (LT), Gluteus medius (GM), Semimembranosus (SM), Biceps femoris (BF) and Triceps brachii (TB)) were collected from each 10 Hanwoo steers. Warner-Bratzler WB-shear force (WBSF) and texture profile analysis (TPA) texture profiles were determined after 3 or 21 days of chiller, and randomly assigned to four groups; non-cooked, cooked at 55, 70 or $85^{\circ}C$. Results: Toughness of WBSF and TPA hardness of Hanwoo muscles were presence in the order of LT = PM = GM = SM < BF = TB (p < 0.001) for non-cooked raw muscle, and PM < LT = GM = SM < TB=BF (p < 0.001) for cooked meat aged for 3 days. WBSF linearly increased in 3 days aged meats after cooked at a higher temperature (P < 0.05). On the other hand, toughening of the muscles were significantly (P < 0.05) differed at various temperature when muscles were aged for 21 days. WBSF of PM and LT muscles were significantly increased at a higher cooking temperature, while other muscles (i.e., GM, SM, BF, TB) showed the lowest values at $70^{\circ}C$. In the case of TPA hardness, the effect of cooking temperature was very less in the toughness of the muscle (P > 0.05). Conclusion: Taken together, these findings clearly showed that the toughness of the muscle highly depends and varies upon the temperature and ageing of the muscle. Moreover, the effect of cooking temperature was very limited on aged muscles. The results mirror the importance of cooking temperature for objective measurements which ultimately estimate sensory tenderness and other quality traits.