• Journal of radiological science and technology
• /
• v.27 no.4
• /
• pp.55-60
• /
• 2004

The purpose of this study was to examine both patient exposure dose during mammography and the utility status of mammograpy equipments. The data of this study were collected through questionnaire survey for 278 medical facilities registered at Korean Hospital Association and finally 161 medical facilities's data were analyzed. According to data analysis, medical facilities of 14.9% used the average glandular dose of less than 0.5 mGy, $0.51{\sim}1.0\;mGy$ 8.6%, $1.01{\sim}1.5\;mGy$ 14.9%, $1.51{\sim}2.0\;mGy$ 11.1%, $2.01{\sim}2.5\;mGy$ 9.8%, $2.51{\sim}3.0\;mGy$ 33.3%, and 7.4% more than 3.01 mGy. It was found that medical facilities of 92.6% used less than 3 mGy, showing that this figure is similar to the limit value of 3 mGy recommended by Korea Food & Drug Administration(KFDA). Recently, international organizations such as ICRP associated with radiation protection suggests that less than 3 mGy of average mammary gland dose be used during mammography in case of using Mo target+Mo filter, film/screen system and craniocaudal projection with the breast pressed to 4.2 cm. The standard dose is being strictly observed and that of the limits is going down to 2 mGy or 1.5 mGy. The major results of this study indicate that interests and a counterplan to reduce patient dose during mammography should be considered. Based on this study, the authors of this study will continue to measure exposure dose to set a new standard for patient exposure dose during mammography.

• Korean Journal of Food Science and Technology
• /
• v.44 no.3
• /
• pp.263-268
• /
• 2012

Novobiocin is a coumarin-containing antibiotic, and has a longer half-life in various animals than other veterinary medicines. A simple and rapid high-performance liquid chromatography assay for the determination of residual novobiocin levels in chicken, beef and milk has been developed and validated. The separation condition for HPLC/UVD was optimized by a MG II $C_{18}$ (4.6 mm $ID{\times}250$ mm, 5 ${\mu}m$) column with 0.1% formic acid in $H_2O$/0.1% formic acid in Acetonitrile (40/60, v/v) as the mobile phase at a flow rate of 1.0 mL/min and the detection wavelength was set at 340 nm. Residues were extracted from tissue by blending with methanol. After liquid-liquid partitioning, lipid materials were removed with n-hexane and purification as Silica (1 g, 6 mL) cartridge with 10 mL acetone/dichloromethane (10/90, v/v). Limit of quantification and linearity performed by the analytical method were 0.02 mg/kg and 0.999 ($r^2$), and the recovery range was $88.8{\pm}5.6-100.3{\pm}4.4$, $88.8{\pm}7.2-97.0{\pm}3.2$ and $88.1{\pm}4.3-92.8{\pm}3.6%$. It is expected that this analytical method with regards to novobiocin in chicken, beef and milk could be applied as an official method to administer food safety on veterinary medicines.

• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.234-242
• /
• 2014

Imicyafos which is a nematicide for controlling root-knot nematodes has been registered in the Republic of Korea in 2012, and the maximum residue limits of imicyafos are set to watermelon and korean melon as each 0.05 mg/kg. Extremely reliable and sensitive analytical method is required for ensuring food safety on imicyafos residues in agricultural commodities. Imicyafos residues in samples were extracted with acetone, partitioned with hexane and dichloromethane, and then purified with florisil. The purified samples were analyzed by HPLC-UVD and confirmed with LC-MS. Linear range was between 0.1~5 mg/kg with the correlation coefficient ($r^2$) 0.99997. Average recoveries of imicyafos ranged from 77.0 to 115.4% at the spiked levels of 0.02 and 0.05 mg/kg with the relative standard deviations of 2.2~9.6%. Limit of detection and quantification were 0.005 and 0.02 mg/kg, respectively. An inter-laboratory study was conducted to validate the determination method in depth, and the results were satisfactory. All of the validation results revealed that the developed analytical method in this study is relevant for imicyafos determination in agricultural commodities and will be used as an official analytical method.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1016-1023
• /
• 2006

The water content of dewatered cake produced from belt press dewatering equipment was about 75 wt% which was some high to handle it, so the equipment contained a limit at the economical and environmental aspect. The thermal dewatering equipment built as an alternative to overcome several problems was set up at the sludge treatment field and estimated some feasibility as comparison with the dewatering performance of belt press. First, dewatering properties of waterworks sludge was analyzed by monthly. The sludge of a water shortage season contained a high organic content which led to be difficult to dewater the cake, the other side the sludge of rainwater season was ease to dewater because of low organic content. According to the results to analysis the water content of dewatered cake produced from two equipments on the base of the seasonal dewatering properties, the water content of dewatered cake produced from thermal dewatering for sludge of water shortage season was $41.6{\sim}48.3$ wt% and $71{\sim}84$ wt% from belt press. In the case of rainwater season, the water content of dewatered cake produced from thermal dewatering was $34{\sim}37.7$ wt% and $57{\sim}70$ wt% from belt press. It was understood that thereduction of water content of cake by thermal dewatering was larger than belt press. The economical aspect for two equipments was evaluated on considering the reduction of cake treatment amount as the decrease of water content of cake. When putting the cost index of thermal dewatering into 100, belt press was 121. This meant that thermal dewater was more economical than belt press by about 20% in the side of construction and operation. In conclusion, thermal dewatering equipment was estimated by producing the low water content dewatered cake as well as being operated with low coat.

• Journal of Arbitration Studies
• /
• v.18 no.1
• /
• pp.167-184
• /
• 2008

The economic cooperation between the South and North Koreas is a very important issue for the unification and economic development of both Koreas. In order to reach a successful economic cooperation, there is a need to coordinate the differences of the two countries before unification. The economic cooperation and the cooperation in other sectors will be followed by the entire unification. It is necessary to prepare a mechanism that could peacefully solve the conflicts and disputes that could arise during the actual process of cooperation, which will secure stable investments and trades. The study on the possibility of introducing the arbitration system as a conflict solving mechanism between the two Koreas is a very important subject, and the basis of this study is on the examination of the arbitration laws of North Korea. Therefore, the study on the efficiency of the North Korean arbitration laws on foreign economy is studying the possibility of a systematical solution to economic conflicts between the South and North Koreas. The problems and possible solutions of the North Korean foreign economy arbitration laws are summarized as follows. First, juridical cooperation system for both South and North courts of justice needs to be set up to smoothly carry out the main procedures. Mutual correspondence and telecommunication needs to be guaranteed, also remittance and the movement of goods shall precede. Second, the free liquidation of businesses by unit and the individual and independent management of wealth of the North Korean economic bodies, organizations and businesses shall precede to independently liquidate wealth and thus make arbitration possible. Third, amendments in the North Korea's foreign economy arbitration law shall be made to some parts of regulations on arbitration agreements and specific contents of written arbitration agreements to avoid conflicts regarding arbitration agreement. Fourth, the members of the North Korean arbitration committee shall impartially manage the committee only without taking the role of arbitrator, and the clause that allows the North Korean committee to nominate the arbitrator shall be erased. In case an agreement regarding the number of arbitrators is not reached, the three arbitrators general rule shall be applied. In case of requests from any of the parties, a third country arbitrator nomination shall be guaranteed. Also, the requested arbitrator by the party shall be nominated with the cooperation of the court. Fifth, the trial in case of non-appearance or written trial shall be added to the North Korean law in to prevent intended negligence or evasion. Sixth, regulations regarding the court's investigation of evidence shall be added to the North Korean law to make fair arbitration possible in case that government power is needed in order to investigate evidence. Seventh, provisions regarding majority decision shall be added in the North Korean law in the impossibility of unanimous decisions, and the certified system in the arbitration committee official text shall be erased to prevent arrogation and assure the power of the decision made by the arbitration government. Eighth, as "the wrong decision approved" reason for cancellation of arbitration in the North Korean law includes the content of the decision made by the arbitrator could lead to uselessness of arbitration, amendment will be necessary to limit it to legitimacy of the arbitration agreement and wrong procedures. It is hoped that this thesis will be of important use in understanding the issues on the workability and the solutions to the South and North Koreas' arbitration that could be presented during the negotiations for the countries' economic cooperation.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.604-619
• /
• 2012

According to the concept of woodland aesthetic in Germany and forest design in United Kingdom, artificial forest should be restore ecologically step by step in National Park, Korea. This study was carried out to provide the density criterion of thinning for the inducement of the ecological succession by analysing of vegetational structure in Artificial Forest, National Parks. Eleven plots(size is $20m{\times}20m$) were set up in the artificial forest such as Pinus koraiensis forest, Abies holophylla forest, Chamaecyparis obtusa forest, Populus tomentiglandulosa forest, and Larix kaempferi forest and in the natural forest such as Pinus densiflora community, Pinus densiflora-Quercus serrata community, and Quercus serrata community in Chiaksan, Songnisan, Deogyusan, and Naejangsan National Parks, Korea. We classified the artificial forest into undeveloped type of succession, type of alien young trees developing, and early phase type of succession based on the vegetational structure. According to the index of Shnnon's diversity(unit: $400m^2$), undeveloped type of succession was ranged from 0.9681 to 1.1323, type of alien young trees developing was ranged from 1.0192 to 1.1870, early phase type of succession was ranged from 1.3071 to 1.3892, and natural vegetation was ranged from 1.2202 to 1.3428, therefore early phase type of succession forest and natural vegetation are more higher than simple-layered artificial forest with one needle leaf tree species. The limit for the step-by-step thinning was in the range of 30~60%. In case of undeveloped type of succession, we should thin out from large trees throughout three phases, because alien species dominated high value 88~90% in canopy layer. In case of type of alien young trees developing, we should thin out from alien young trees such as Populus tomentiglandulosa throughout one or two phases, because alien species dominated high value 60~97% and young trees with saplings growing up in understory and shrub layer. In case of early phase type of succession, we should thin out from alien trees that compete with native species throughout one or two phases, because alien species dominated less than value 30%.

• The Korean Journal of Air & Space Law and Policy
• /
• v.21 no.1
• /
• pp.135-167
• /
• 2006

Air service agreements between EU Member States and third countries concluded by Sweden, Finland, Belgium, Luxembourg, Austria, the Netherlands, Denmark and the United Kingdom after the Second World War infringe EU law. They authorize the third countries to withdraw, suspend or limit the traffic rights of air carriers designated by the signatory States. According to the Court of Justice of the European Communities (CJEC), these agreements infringe EU law in two respects. On the one hand, the presence of nationality clauses infringes the right of European airlines to non-discriminatory market access to routes between all Member States and third countries. On the other hand, only the EU has the authority to sign up to this type of commitment where agreements affect the exercise of EU competence, i.e. involve an area covered by EU legislation. The Court held that since the third countries have the right to refuse a carrier, these agreements therefore constitute an obstacle to the freedom of establishment and freedom to provide services, as the opening of European skies to third countries' companies is not reciprocal for all EU airlines. In the conclusion, in order to reconstruct these public international air law, The new negotiations between EU member states and third countries, especially the US, must be designed to ensure an adequate set of principles, so that Member States, in their bilateral relations with third countries in the area of air service, should consider following three models. The 1st, to develop a new model of public international air law such as a new Bermuda III. The 2nd, to reconstruct new freedoms of the air, for example, the 7th, 8th, and 9th freedoms. The 3rd, to explore new approaching models, such as complex system theory explored in the recent social sciences, to make access world-wide global problems instead of bilateral problems between EU member states and United States. The example will show any lessons to air talks between European Union and ROK.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.29-46
• /
• 2004

It is important to identify geometries of fracture that act as a conduit of fluid flow for characterization of ground water flow in fractured rock. Fracture geometries control hydraulic conductivity and stream lines in a rock mass. However, we have difficulties to acquire whole geometric data of fractures in a field scale because of discontinuous distribution of outcrops and impossibility of continuous collecting of subsurface data. Therefore, it is needed to develop a method to describe whole feature of a target fracture geometry. This study suggests a new approach to develop a method to characterize on the whole feature of a target fracture geometry based on the Fourier transform. After sampling of specimens along a target fracture from borehole cores, effective frequencies among roughness components were selected by the Fourier transform on each specimen. Then, the selected effective frequencies were averaged on each frequency. Because the averaged spectrum includes all the frequency profiles of each specimen, it shows the representative components of the fracture roughness of the target fracture. The inverse Fourier transform is conducted to reconstruct an averaged whole roughness feature after low pass filtering. The reconstructed roughness feature also shows the representative roughness of the target subsurface fracture including the geometrical characteristics of each specimen. It also means that overall roughness feature by scaling up of a fracture. In order to identify the characteristics of permeability coefficients along the target fracture, fracture models were constructed based on the reconstructed roughness feature. The computation of permeability coefficient was performed by the homogenization analysis that can calculate accurate permeability coefficients with full consideration of fracture geometry. The results show a range between $10^{-4}{\;}and{\;}10^{-3}{\;}cm/sec$, indicating reasonable values of permeability coefficient along a large fracture. This approach will be effectively applied to the analysis of permeability characteristics along a large fracture as well as identification of the whole feature of a fracture in a field scale.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.1
• /
• pp.39-45
• /
• 2012

The purpose of this research is to look into the tea-drinking pictures of the Joseon Dynasty in order to find the unique landscape traits of tea-drinking spaces of the era. A number of tea-drinking pictures were drawn during the Joseon Dynasty period and in most cases, the names of the painters are stated as well. These factors make tea-drinking pictures a seminal source that illustrates the landscape traits of the last Dynasty of Korea. For those pictures contain the main components of landscape such as the tastes of 'Yangban'(noblemen), natural characters, and space traits. Since tea was first introduced in Korea during the Three Kingdom Period, tea-drinking culture has a long history in the country. There have been various studies about tea and many study results have been presented. Few research, however, have looked into tea culture from the point of landscape. Under the premise that tea-drinking pictures of Joseon Dynasty can be a cultural code that explains Korean tea-drinking culture, this thesis looked into those pictures from various angles and analyzed them in order to elucidate the attributes of scenery components of tea-drinking spaces that Koreans have forged and developed, and following results could be found. The Landscape components illustrated in tea-drinking pictures of the Joseon Dynasty can be divided into the element of architecture, the element of water, stone and plants. First, for the element of architecture, it was found that tea-drinking took place in anywhere in Korea without specific tea-drinking buildings or gardens unlike the case of Japan. This has to do with traits of Koreans who were not bound by formality and truly loved nature. Second, for the element of water, water contributed to making harmonious landscape. Third, for the element of stone, it was clear that stone had a practical role in providing comfortable place for lying and enjoying tea-drinking and scenery. Fourth, plants made elegant figure in the landscape and were planted in accordance with their inner meaning. Tea-drinking pictures of the Joseon Dynasty elucidates that when it comes to tea-drinking, Koreans were not obsessed with a formality of tea-drinking, or a set of tea ceremony, which is profoundly different with Japanese, and Koreans did not put a limit on a place for tea-drinking because for Koreans any place they sat could be a great place for tea-drinking.

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.85-97
• /
• 2019

It can be observed that steep slopes ($65^{\circ}$ to $80^{\circ}$) consist of rock masses were kept stable for a long time. In rock-mass slopes with similar ground condition, steeper slopes than 1 : 0.5 ($63^{\circ}$) may be applied if the discontinuities of rock-mass slope are distributed in a direction favorable to the stability of the slope. In making a decision the angle of the slope, if the preliminary rock mass conditions applicable to steep slope are quantitatively setup, they may be used as guidance in design practice. In this study, the above rock mass was defined as a good continuum rock mass and the quantitative setup criterion range was proposed using RMR, SMR and GSI classifications for the purpose of providing engineering standard for good continuum rock mass conditions. The methods of study are as follows. The stable slope at steep slopes ($65^{\circ}$ to $80^{\circ}$) for each rock type was selected as the study area, and RMR, SMR and GSI were classified to reflect the face mapping results. The results were reviewed by applying the calculated shear strength to the stable analysis of the current state of rock mass slope using the Hoek-Brown failure criterion. It is intended to verify the validity of the preliminary criterion as a rock mass condition that remains stable on a steep slope. Based on the analysis and review by the above research method, it was analyzed that a good continuum rock mass slope can be set to Basic RMR ${\geq}50$ (45 in sedimentary rock), GSI and SMR ${\geq}45$. The safety factor of the LEM is between Fs = 14.08 and 67.50 (average 32.9), and the displacement of the FEM is 0.13 to 0.64 mm (average 0.27 mm). This can be seen as a result of quantitative representation and verification of the stability of a good continuum rock mass slope that has been maintained stable for a long period of time with steep slopes ($65^{\circ}$ to $80^{\circ}$). The setup guideline for a good continuum rock mass slope will be able to establish a more detailed setup standard when the data are accumulated, and it is also a further study project. If stable even on steep slopes of 1 : 0.1 to 0.3, the upper limit of steep slopes is 1 : 0.3 with reference to the overseas design standards and report, thus giving the benefit of ensuring economic and eco-friendlyness. Also, the development of excavation technology and plantation technology and various eco-friendly slope design techniques will help overcome psychological anxiety and rapid weathering and relaxation due to steep slope construction.