• Journal of Korean Physical Therapy Science
• /
• v.15 no.1
• /
• pp.1-9
• /
• 2008

Background and Purpose : This study serves the purpose to present the effective way on back pain therapy for women during their pregnancy by comparing and analyzing the effects influencing on pain index, limits on daily life, and diminution of lumbar curve, when having treated for 6 weeks, dividing into therapy group, applied by decompression therapy on spine without unnecessary effects on the pregnant women and their fetus and the existent general physiotherapy group, applied on diminution of their back pain. Subject & methods : We made impregnate women of 30(25${\sim}$34years), as the subject of this study, who understood, and agreed with, this study, among pregnant women who were diagnosed as back pain. Pain intensity, limit index on daily life, and lumbar curve test, prior to experiment was implemented as paired t－test, comparison of the difference of average by each group before and after experiment was analysed as independent t－test, and statistical examination level was set up as 0.05. Results : The difference of average of pain and limit on daily life between the group, SDTG(spinal decompression therapy group), and the group, GPTG(general physical therapy group), before and after experiment was diminished as much as 44.4% and 16.79% each after completed 6 weeks' experiment, limit on daily life in both groups showed as much as 37.2% and 21.5% each, in the end, they statistically showed conspicuous difference(p<.05). Comparison of lumbar curves between both groups, SDTG and GPTG, before and after experiment, were diminished from -23.13${\pm}$4.85 to -15.66${\pm}$3.71, and there was no remarkable difference(p<.05). Conclusion : As, in this study, decompression therapy is more effective than general physical therapy with pregnancy low back pain in pain, limitation of daily life, lumbar curve.

• Culinary science and hospitality research
• /
• v.23 no.6
• /
• pp.20-26
• /
• 2017

To guarantee the safety of rice cake production, the Hazard Analysis Critical Control Points system was applied to the production process. The purpose of this study was to analyze the microbiological hazards of the manufacture of rice cakes, and establish critical limits in the process of the manufacturing rice cakes. To control the microbiological hazards, the sterilization process was set to a critical limit. The process of manufacturing rice cakes can reduce these microbiological hazards during the steaming process. A microorganism test for each specimen was conducted three times and compared with before and after steaming processes. The finished product was conducted by microbiology experiment and the validity of the steaming process was verified. The results were determined to be capable of reducing the biological element of Critical Control Point via the steaming process. Microbiology such as aerobic plate count, coliform, Escherichia coli(E. coli), Listeria monocytogenes, Enterohemorrhagic E. coli, Salmonella spp., Bacillus cereus, Staphylococcus aureus and Clostridium perfringens was evaluated by the experimental method of Korean Food Standards Codex. Aerobic plate count was reduced by steaming process, and no microorganism were detected. All rice cakes in the finished product were judged to be safe for both the Escherichia coli and general bacteria. In conclusion, it suggested that a HACCP plan was necessary for management standard and systematic approach in the establishment of critical limit, problem resolution, verification method, education, and records management. Based on this study, it is intended to provide a baseline for improving quality control standards and improving hygiene levels for small manufacturers.

• Journal of Korean Society for Quality Management
• /
• v.46 no.3
• /
• pp.739-752
• /
• 2018

Purpose: The purpose of this study was to investigate the relationship between kiln processing parameters and NOx emissions that occur in the sintering and calcination steps of the cement manufacturing process and to derive the main factors responsible for producing emissions outside emission limit criteria, as determined by category models and classification rules, using data mining techniques. The results from this study are expected to be useful as guidelines for NOx emission control standards. Methods: Data were collected from Precalciner Kiln No.3 used in one of the domestic cement plants in Korea. Thirty-four independent variables affecting NOx generation and dependent variables that exceeded or were below the NOx emiision limit (>1 and <0, respectively) were examined during kiln processing. These data were used to construct a detection model of NOx emission, in which emissions exceeded or were below the set limits. The model was validated using SPSS MODELER 18.0, artificial neural network, decision treee (C5.0), and logistic regression analysis data mining techniques. Results: The decision tree (C5.0) algorithm best represented NOx emission behavior and was used to identify 10 processing variables that resulted in NOx emissions outside limit criteria. Conclusion: The results of this study indicate that the decision tree (C5.0) can be applied for real-time monitoring and management of NOx emissions during the cement firing process to satisfy NOx emission control standards and to provide for a more eco-friendly cement product.

• The Korean Journal of Applied Statistics
• /
• v.25 no.2
• /
• pp.311-319
• /
• 2012

The simplest and the most important distribution in survival analysis is exponential distribution. Koziol and Green (1976) derived Cram$\acute{e}$r-von Mises statistic's randomly censored version based on the Kaplan-Meier product limit estimate of the distribution function; however, it could not be practical for a real data set since the statistic is for testing a simple goodness of fit hypothesis. We generalized it to the composite hypothesis for exponentiality with an unknown scale parameter. We also considered the classical Kolmogorov-Smirnov statistic and generalized it by the exact same way. The two statistics are compared through a simulation study. As a result, we can see that the generalized Koziol-Green statistic has better power in most of the alternative distributions considered.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.1
• /
• pp.165-172
• /
• 2017

Machines are physically or chemically degenerated by continuous usage. One of the results of this degeneration is the process mean shift. Under the process mean shift, production cost, failure cost and quality loss function cost are increasing continuously. Therefore a periodic preventive resetting the process is necessary. We suppose that the wear level is observable. In this case, process mean shift problem has similar characteristics to the maintenance policy model. In the previous studies, process mean shift problem has been studied in several fields such as 'Tool wear limit', 'Canning Process' and 'Quality Loss Function' separately or partially integrated form. This paper proposes an integrated cost model which involves production cost by the material, failure cost by the nonconforming items, quality loss function cost by the deviation between the quality characteristics from the target value and resetting the process cost. We expand this process mean shift problem a little more by dealing the process variance as a function, not a constant value. We suggested a multiplier function model to the process variance according to the analysis result with practical data. We adopted two-side specification to our model. The initial process mean is generally set somewhat above the lower specification. The objective function is total integrated costs per unit wear and independent variables are wear limit and initial setting process mean. The optimum is derived from numerical analysis because the integral form of the objective function is not possible. A numerical example is presented.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.3
• /
• pp.271-276
• /
• 2012

BACKGROUND: It is hard to control the agricultural products exceeding MRL (maximum residue limit) before forwarding. Therefore, NAQS (National Agricultural Products Quality Management Service, South Korea) established PHRL (pre-harvest residue limit) on agricultural products during their cultivation periods. This study was performed to set the PHRLs of peach during cultivation period, and also to estimate biological half-lives for residues of clothianidin and fluquinconazole. METHODS AND RESULTS: Two groups of peach were treated under Korean GAP (Good Agricultural Practices) with application time, single and triple treatments. Sample was collected over 14days (each after 0, 2, 4, 6, 8, 10, 12, 14 days. 8times), and clothianidin and fluquinconazole were analyzed by HPLC/DAD and GC/ECD, respectively. CONCLUSION: The biological half-life of clothianidin in single treatment and triple treatment was 5.2days and 7.0days. That of fluquinconazole was also 3.9days and 4.1days, respectively. The PHRL of peach on 10days before harvest was 1.4 mg/kg in clothianidin and 1.8 mg/kg in fluquinconazole.

• Nuclear Engineering and Technology
• /
• v.14 no.4
• /
• pp.196-203
• /
• 1982

To transport the spent fuel assemblies of Korea Nuclear Unit 1, which is a Westinghouse type two loop pressurized water reactor, it has been found that steel is the most appropriate material for the design of a shipping cask in comparison with lead and depleted uranium. The proposed shipping cask will transport nine fuel assemblies at the same time and is well within the weight limit of transportation by unrestricted rail car. The cask requires 33cm thick steel shield and 27cm thick water region to satisfy the 3 feet apart dose rate limit set forth in 10 CFR 71, and 1.27cm thick steel boron fuel basket to hold the fuel elements inside the cask and control the effective multiplication factor. As a safety analysis, the fuel cladding and centerline temperatures were calculated under the accident condition of complete loss of water coolant, and it was found that the temperature was much lower than the limit of the melting point. k$_{eff}$ was calculated with fresh fuel assemblies, which was found to be well lower than 0.95. For shielding computation, the multipurpose Monte Carlo code MORSE-CG and one dimensional discrete ordinates transport code ANISN were used, and the Monte Carlo codes KENO and MORSE-CG were used for criticality calculation. The radiation source terms were calculated using ORIGEN-79.9.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.669-677
• /
• 2016

A miniaturized FTIR spectrometer based on lamellar grating interferometry is being developed for passive remote-sensing. Consisting of a pair of micro-mirror arrays, the lamellar grating can be fabricated using MEMS technology. This paper describes a method to compute the optical field in the interferometer to optimize the design parameters of the lamellar grating FTIR spectrometer. The lower limit of the micro-mirror width in the grating is related to the formation of a Talbot image in the near field and is estimated to be about $100{\mu}m$ for the spectrometer to be used for the wavelength range of $7-14{\mu}m$. In calculating the far field at the detection window, the conventional Fraunhofer equation is inadequate for detection distance of our application, misleading the upper limit of the micro-mirror width to avoid interference from higher order diffractions. Instead, the far field is described by the unperturbed plane-wave combined with the boundary diffraction wave. As a result, the interference from the higher order diffractions turns out to be negligible as the micro-mirror width increases. Therefore, the upper limit of the micro-mirror width does not need to be set. Under this scheme, the interferometer patterns and their FT spectra are successfully generated.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.5
• /
• pp.305-311
• /
• 2019

In this study, we examined the proper spacing between the expansion joints according to the temperature load of the inter-modal terminal platform infrastructure to implement a new inter-modal automated freight transport system, which we intend to introduce in Korea. To review the proper expansion joint spacing of the terminal platforms, we set the maximum expansion joint spacing according to the regional temperature changes using the equation proposed by the Federal Construction Council (FCC) of the United States. Then, the maximum displacement value, which was calculated through the structural analysis program, and the limit of the horizontal displacement of the building structure were compared. The proper expansion joint spacing was selected as the slab length at which the maximum displacement of the structure, due to temperature changes, was below the horizontal displacement limit. Based on the application of maximum expansion joint spacing for each region calculated through the FCC's suggestion, the maximum displacement that could occur within the limit of the lateral displacement of the structure was determined.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.3
• /
• pp.357-366
• /
• 2019

We first confirmed the involvement of MalQ (4-${\alpha}$-glucanotransferase) in Escherichia coli glycogen breakdown by both in vitro and in vivo assays. In vivo tests of the knock-out mutant, ${\Delta}malQ$, showed that glycogen slowly decreased after the stationary phase compared to the wild-type strain, indicating the involvement of MalQ in glycogen degradation. In vitro assays incubated glycogen-mimic substrate, branched cyclodextrin (maltotetraosyl-${\beta}$-CD: G4-${\beta}$-CD) and glycogen phosphorylase (GlgP)-limit dextrin with a set of variable combinations of E. coli enzymes, including GlgX (debranching enzyme), MalP (maltodextrin phosphorylase), GlgP and MalQ. In the absence of GlgP, the reaction of MalP, GlgX and MalQ on substrates produced glucose-1-P (glc-1-P) 3-fold faster than without MalQ. The results revealed that MalQ led to disproportionate G4 released from GlgP-limit dextrin to another acceptor, G4, which is phosphorylated by MalP. In contrast, in the absence of MalP, the reaction of GlgX, GlgP and MalQ resulted in a 1.6-fold increased production of glc-1-P than without MalQ. The result indicated that the G4-branch chains of GlgP-limit dextrin are released by GlgX hydrolysis, and then MalQ transfers the resultant G4 either to another branch chain or another G4 that can immediately be phosphorylated into glc-1-P by GlgP. Thus, we propose a model of two possible MalQ-involved pathways in glycogen degradation. The operon structure of MalP-defecting enterobacteria strongly supports the involvement of MalQ and GlgP as alternative pathways in glycogen degradation.