• Journal of Society of Preventive Korean Medicine
• /
• v.15 no.3
• /
• pp.153-162
• /
• 2011

Objectives : This study has aimed to monitor microbial detection on pill types of herbal medicine which are circulating in markets including Oriental Medical Clinics(O.M.C.s) and Pharmacy in Korea. Methods : 10 different samples of O.M.Cs and 10 different samples of Pharmacy were investigated by culture method and non-culture method based on the 9th edition of microbial examination released by Korea Food & Drug Administration. Results : The total microbial count among each 10 samples were detected within the limit suggested by WHO. 2 samples of O.M.C.s and 1 samples of Pharmacy exceeded WHO's limit in fungi count. No samples exceeded WHO's limit in bacteria count. Most bacteria founded in samples were the phylum of Firmicutes and Proteobacteria which are common in soil by non-culture method. Conclusion : Further study should be followed to set up proper microbial limit of herbal materials including pill types.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.3
• /
• pp.95-100
• /
• 2020

Machines and facilities are physically or chemically degenerated by continuous usage. One of the results of this degeneration is the process mean shift. The representative type of the degeneration is wear of tool or machine. According to the increasing wear level, non-conforming products cost and quality loss cost are increasing simultaneously. Therefore a periodic preventive resetting the process is necessary. The total cost consists of three items: adjustment cost (or replacement cost), non-conforming cost due to product out of upper or lower limit specification, and quality loss cost due to difference from the process target value and the product characteristic value among the conforming products. In this case, the problem of determining the adjustment period or wear limit that minimizes the total cost is called the 'process mean shift' problem. It is assumed that both specifications are set and the wear level can be observed directly. In this study, we propose a new model integrating the quality loss cost, process variance, and production volume, which has been conducted in different fields in previous studies. In particular, for the change in production volume according to the increasing in wear level, we propose a generalized production quantity function g(w). This function can be applied to most processes and we fitted the g(w) to the model. The objective equation of this model is the total cost per unit wear, and the determining variables are the wear limit and initial process setting position that minimize the objective equation.

• Journal of the Korean Society of Safety
• /
• v.38 no.3
• /
• pp.35-42
• /
• 2023

This study analyzed the current and temperature characteristics of major components of an induction motor during normal and abnormal operations as functions of the difference in the rated capacities of medium and large-sized motors widely used in industrial settings. The temperature rise equation of the induction motor winding was derived through locked-rotor operation experiments and linear regression analysis. When the ambient temperature is 40 ℃, the time to reach 155 ℃, the temperature limit of the insulation class (F class) of the winding of the induction motor, was confirmed to be 48 seconds for the 2.2 kW induction motor and 39 seconds for the 3.7 kW induction motor. This means that when the rated capacity is large or the installation environment is high temperature, the time to reach the temperature limit of the insulation class during locked-rotor operation is short, and the risk of insulation deterioration and fire is high. In addition, even if the EOCR (Electronic Over Current Relay) is installed, if the setting time is excessively set, the EOCR does not operate even if the normal and locked-rotor operation of the induction motor is repeated, and the temperature limit of the insulation grade of the winding of the induction motor is exceeded. The results of this study can be used for preventive measures such as the promotion of electrical and mechanical measures for the failure of induction motors and fire prevention in industrial sites, or the installation of fire alarm systems.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.11a
• /
• pp.251-259
• /
• 2006

Evaluation of the work of art with intention of the artist different is not a possibility of free oneself from the limit which estimates an evaluation at value of appreciator. We tried new interpreting about the work of art in this paper. The work of art respects the intention of the artist to make it and interprets intention until now. After critics distinguish by a period, an area that they set to philosophical thought which is the time and interpreted. We set to each one subjectivity and interpreted between artist to make the work of art and appreciator. But in this paper, we tied various criteria which appreciates the work of art. We tried so that we presented the intimacy each other newly. Otherwise we tied with the subjectivity of the individual and are the try to be an objectification low through statistical technique. We looked into the culture and art in the introduction and explain the discussion about the work of art interpreting which the main subject. We set the category 6 area, and explain an each criteria explanation and assessment method. We tried to propose new interpreting as the intimacy to be multivariate data analysis result of the assessment analysis. Stopping from the thing which sees the work of art knows, it will be able to give meaning thing from this research prerequisite.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.581-588
• /
• 2015

In this paper, we researched that setting standard for RSC(Radar Cross Section) of naval surface ship could be determined and considered in various ways on ship's survivability, technical building feasibility, operation and so on. This study presented fundamental capacity on anti-ship missile, radar, flight and so no and the procedure to set of target/standards for RSC. The RCS standards is good at setting low as low as to improve survivability aspect, but because we should consider effect, technical limit, cost etc, this paper analyzed necessary elements to set standard than to suggest specific number and suggested procedure to set standars according to suggest the boundary of RCS.

• Food Science and Biotechnology
• /
• v.14 no.3
• /
• pp.387-391
• /
• 2005

Competitive polymerase chain reaction (cPCR) was used to develop a direct enumeration method of Listeria monocytogenes in pork meat. Pork meat was artificially inoculated with L. monocytogenes and DNA was extracted using guanidine thiocyanate-phenol-chloroform and subjected to PCR amplification. Sixteen primer sets for L. monocytogenes hlyA gene were tested for sensitive detection and the DG69/DG74 primer set was selected. The detection limit achieved with this primer set was as low as 860 colony-forming units (cfu) per 0.1 g of pork meat. When the samples were cultured at $30^{\circ}C$ for 16 hr in Brain Heart Infusion (BHI) medium, even a single bacterium could be detected with this primer set by PCR. For cPCR, the hlyA gene, which features a 148 bp-deletion, was cloned in the pGEM-4Z vector. A known amount of competitor DNA which has the same primer binding sites was co-amplified with L. monocytogenes total DNA from the artificially inoculated pork meat. The cell-number determined by cPCR was approximately equal to cfu from the Most Probable Number (MPN) method. The whole procedure took only 5 hr.

• Journal of Power Electronics
• /
• v.19 no.4
• /
• pp.989-999
• /
• 2019

This paper proposes a fault-tolerant control strategy with finite control set model predictive control (FCS-MPC) based on hierarchical optimization for five-level H-bridge neutral-point-clamped (5L-HNPC) inverter-fed induction motor drives. Fault-tolerant operation is analyzed, and the fault-tolerant control algorithm is improved. Adopting FCS-MPC based on hierarchical optimization, where the voltage is used as the controlled objective, called model predictive voltage control (MPVC), the postfault controller is simplified as a two layer control. The first layer is the voltage jump limit, and the second layer is the voltage following control, which adopts the optimal control strategy to ensure the current following performance and uniqueness of the optimal solution. Finally, simulation and experimental results verify that 5L-HNPC inverter-fed induction motor drives have strong fault tolerant capability and that the FCS-MPVC based on hierarchical optimization is feasible.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.153-156
• /
• 1988

Ab initio calculations are performed for $ArCO_2^+$ and $ArCO_2$. Between the two configurations of $ArCO_2^+$ the orbital interactions and the higher order correlation calculations favor the T-shape, and their interaction energies are calculated to be approximately half the experimental values using 6-31G$^{\ast}$ basis set. In $ArCO_2$, the calculations qualitatively favor the T-structure, which is compatible with the experiment. However, the true interaction energy is obscured since it is within the BSSE limit at this basis set size and the correlation level. Addition of sp type diffuse functions increase the interaction energies by a considerable amount, but the BSSE estimated by CP method are responsible for the significant portion of the difference. The possible equilibrium structure of the $Ar^+-CO_2$ complex, where the charge is localized on Ar, is suggested as having a linear structure. The potential energy surface and the amount of charge transfer are shown to be sensitive to the type and balancing of basis set.

• International Journal of Quality Innovation
• /
• v.9 no.3
• /
• pp.71-91
• /
• 2008

The definition of cycle time is the time from the wafer start to the wafer output. It usually takes one or two months to get the product since customer decides to produce it. The cycle time is a critical factor for customer satisfaction because it represents the response time to the market. Long cycle time reflects the ineffective investment for the capital. The cycle time is very important for foundry because long cycle time will cause customer unsatisfied and the order loss. Consequently, all of the foundries put lots of human source in the cycle time improvement. Usually, we make decisions based on the experience in the cycle time management. We have no mechanism or theory for cycle time management. We do work-in-process (WIP) management based on turn rate and standard WIP (STD WIP) set by experiences. But the experience didn't mean the optimal solution, when the situation changed, the cycle time or the standard WIP will also be changed. The experience will not always be applicable. If we only have the experience and no mechanism, management will not be work out. After interview several foundry fab managers, all of the fab can't reflect the situation. That is, all of them will have an impact period after product mix or utilization varied. In this study, we want to develop a formula for standard WIP and use statistical process control (SPC) concept to set WIP upper/lower limit level. When WIP exceed the limit level, it will trigger action plans to compensate WIP Profile. If WIP Profile balances, we don't need too much WIP. So WIP level could be reduced and cycle time also could be reduced.

• Tribology and Lubricants
• /
• v.22 no.5
• /
• pp.260-268
• /
• 2006

The dielectric constants of used gasoline engine oils were obtained at a few temperatures and a frequency. Through analyzing the characteristics of dielectric constant, the related correlation between the changes in dielectric constants of oil and the degree of oil deterioration is going to be found. The dielectric constant was calculated using cross capacitances measured by a sensor tube. As results of the measurement of the fresh engine oil's dielectric constant, it was found that the value of dielectric constant was set down below $60^{\circ}C$ regardless changing frequency. Further, above 6 kHz, the dielectric constant was set down even if temperature was above $100^{\circ}C$ Therefore, for the measurement of used oils, it was selected the frequency of 6 kHz,,and the temperature of $80^{\circ}C$ preventing a certain ionic-conduction effects on the measured dielectric constant and the evaporation of a certain fluid mixed with engine oil. Specially, the effects of the mixing fluid like coolant, water and fuel on the fresh engine oil's dielectric constant were studied. It was found that the oil mixed with coolant showed the highest value, next water, and the lowest fuel. As results of the measurement of the used engine oil's dielectric constant, it was found that the possible changed rate of the used engine oil's dielectric constant based on the warning limit for engine oil in service was below 4% for gasoline engine oil.