• 제목/요약/키워드: limit in distribution

검색결과 1,119건 처리시간 0.027초

이온 窒化된 SW3코일 스프링의 疲勞擧動에 관한 硏究 (Study on the Fatigue Behavior of Ion-Nitrided SW3 Coil Spring)

  • 염영하;장성대
    • 대한기계학회논문집
    • /
    • 제7권4호
    • /
    • pp.355-360
    • /
    • 1983
  • This paper deals with fatigue behavior of ion-nitrided coil spring. It is found that fatigue limit can be significantly increased by ion-nitriding. Ion-nitribed specimen which is treated at 550.deg. C for 5 hours improves in the fatigue limit by 30 percent in comparison with that of non-nitrided specimen. On the other hand, the value of spring constant K has nothing to do with nitriding time and temperature in this experimental range. Besides fatigue behavior, the following effects are discussed such as compound layer, diffusion layer, hardness distribution and their relations.

PSSC 합성거더 교량의 비선형 거동 분석 및 신뢰도 해석 (Analysis of Nonlinear Behavior and Reliability of PSSC Composite Girder Bridge)

  • 황철성;백인열
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제12권1호
    • /
    • pp.158-166
    • /
    • 2008
  • 프리스트레스하중이 작용되는 강합성교인 PSSC 교량에서 프리스트레스의 효과와 단면의 변형에 따른 텐돈의 변형의 영향을 밝히기 위해 사하중 및 활하중이 작용될 때 합성전 후에 발생하는 부재내의 변형도 및 응력변화와 허용응력 한계상태, 항복응력 한계상태 및 강도한계상태의 단면력과 부재내의 변형도 및 응력변화를 구한다. 또한 거더의 처짐 및 응력과 휨강도를 변수로 하는 한계상태들을 가정하고 이에 대한 신뢰도 분석을 수행한다. 허용응력에 맞추어 설계한 예제 단면의 응력에 대한 신뢰도 지수가 0 부근임에 비하여, 처짐 및 휨강도에 대한 신뢰도 지수는 높은 값을 주고 있어서 도로교설계기준의 허용응력에 대하여 설계한 PSSC 거더는 처짐 및 휨강도에 대하여 높은 신뢰도를 얻을 수 있음을 알 수 있다.

PSSC 합성거더 교량의 프리스트레스 효과 및 신뢰도 해석 (Analysis of Prestress Effect and Reliability of PSSC Composite Girder Bridge)

  • 황철성;백인열
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제12권6호
    • /
    • pp.214-224
    • /
    • 2008
  • 프리스트레스하중이 작용되는 강합성교인 PSSC 교량에서 프리스트레스의 효과와 단면의 변형에 따른 텐던의 변형의 영향을 밝히기 위해 교량지간 25m~45m의 최적화된 표준단면에 대해 고정하중 및 활하중이 작용될 때 합성전 후에 발생하는 부재내의 변형도 및 응력변화와 허용응력 한계상태, 항복응력 한계상태 및 강도한계상태의 단면력과 부재내의 변형도 및 응력변화를 구한다. 또한 거더의 처짐 및 응력과 휨강도를 변수로 하는 한계상태들을 가정하고 이에 대한 신뢰도 분석을 수행하였다. 표준 PSSC 교량의 경우 하중 및 저항계수를 적용하여 설계하는 미국 설계기준의 목표신뢰도지수 값이 3.5 임과 비교하면, 허용응력을 기준으로 설계한 단면은 강도에 대하여 상당히 높은 수준의 신뢰도지수를 보임을 알 수 있다.

Harmonic Analysis of Reactor and Capacitor in Single-tuned Harmonic Filter Application

  • Kim, Jong-Gyeum;Park, Young-Jeen;Lee, Dong-Ju
    • Journal of Electrical Engineering and Technology
    • /
    • 제6권2호
    • /
    • pp.239-244
    • /
    • 2011
  • Industrial power distribution system includes many kinds of non-linear loads, which produce the harmonics during energy conversion transition. The single-tuned passive filter is widely used to absorb the harmonics and attenuate its undesirable effect in the distribution system. However, the passive filter might be severely stressed, and sometimes even damaged, due to the absorption of harmonics. There is voltage rise on the capacitor when the single-turned harmonic filter is applied. When the capacitor voltage rose above the allowable limit, the expected life of the capacitor will considerably deteriorate. On the other hand, the reactor can experience the spike voltage even if the voltage and current of the capacitor are within the allowable limit, and this accumulated voltage stress of the reactor causes its premature fault. In this paper, we analyzed and compared the harmonic voltage and current of the reactor and capacitor in a single-tuned harmonic filter through the EMTP software and verified them with the experimental results.

기후변화에 따른 송악의 잠재서식지 분포 변화 예측 (Potential Impact of Climate Change on Distribution of Hedera rhombea in the Korean Peninsula)

  • 박선욱;구경아;서창완;공우석
    • 한국기후변화학회지
    • /
    • 제7권3호
    • /
    • pp.325-334
    • /
    • 2016
  • We projected the distribution of Hedera rhombea, an evergreen broad-leaved climbing plant, under current climate conditions and predicted its future distributions under global warming. Inaddition, weexplained model uncertainty by employing 9 single Species Distribution model (SDM)s to model the distribution of Hedera rhombea. 9 single SDMs were constructed with 736 presence/absence data and 3 temperature and 3 precipitation data. Uncertainty of each SDM was assessed with TSS (Ture Skill Statistics) and AUC (the Area under the curve) value of ROC (receiver operating characteristic) analyses. To reduce model uncertainty, we combined 9 single SDMs weighted by TSS and resulted in an ensemble forecast, a TSS weighted ensemble. We predicted future distributions of Hedera rhombea under future climate conditions for the period of 2050 (2040~2060), which were estimated with HadGEM2-AO. RF (Random Forest), GBM (Generalized Boosted Model) and TSS weighted ensemble model showed higher prediction accuracies (AUC > 0.95, TSS > 0.80) than other SDMs. Based on the projections of TSS weighted ensemble, potential habitats under current climate conditions showed a discrepancy with actual habitats, especially in the northern distribution limit. The observed northern boundary of Hedera rhombea is Ulsan in the eastern Korean Peninsula, but the projected limit was eastern coast of Gangwon province. Geomorphological conditions and the dispersal limitations mediated by birds, the lack of bird habitats at eastern coast of Gangwon Province, account for such discrepancy. In general, potential habitats of Hedera rhombea expanded under future climate conditions, but the extent of expansions depend on RCP scenarios. Potential Habitat of Hedera rhombea expanded into Jeolla-inland area under RCP 4.5, and into Chungnam and Wonsan under RCP 8.5. Our results would be fundamental information for understanding the potential effects of climate change on the distribution of Hedera rhombea.

배전용 몰드변압기에 대한 상승 온도 분포 예측 (Prediction of A Rise in Temperature Distribution of Mold Transformer for Power Distribution System)

  • 이정근;김지호;이향범
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2009년도 정보통신설비 학술대회
    • /
    • pp.391-394
    • /
    • 2009
  • In this paper, achieved rise temperature distribution about degradation phenomenon of 2 MVA distribution mold transformer using finite element method (FEM). Usually, life of transformer is depended on temperature distribution of specification region than thermal special quality of transformer interior. Specially, life of transformer by decline of dielectric strength decreases rapidly in case rise by strangeness transformer interior hot spot temperature value permits. Because calculating high-voltage winding and low-voltage winding of mold transformer and Joule's loss of core for improvement these life, forecasted heat source, and high-voltage winding and low-voltage winding of mold transformer and rise temperature distribution of core for supply of electric power and temperature distribution of highest point on the basis of the result Also, calculated temperature rise limit of mold transformer and permission maximum temperature using analysis by electron miracle heat source alculate and forecasted rise temperature distribution by heat source of thermal analysis with calculated result.

  • PDF

배전선 반송 데이타통신에서의 전원동기 위상대역한정 전송에 의한 주기적 노이즈신호 회피특성에 관한 연구 (A Study on the Characteristics of the Synchroneous Data Transmission by the Phase Band Limit of AC Power Wave to Avoid the Periodic Noises in the Data Communication System of Distribution Line Carrier Method)

  • 최순만;노창주
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제18권3호
    • /
    • pp.78-84
    • /
    • 1994
  • The location of periodic noises in phase of AC power wave reveals to be specific according to the noise kinds which can be generally classified into modulation and baseband types in DLC. The former noise type has constant noise phase which is originated from switching mode power supplies and the latter normally caused from thyristor circuit of low switching frequency is compared to be more dispersive than the other.

  • PDF

알루미늄 합금박판 비등온 성형공정의 유한요소해석 및 실험적 연구 (제1부. 실험) (Finite Element Analysis and Experimental Investigation of Non-isothermal Foming Processes for Aluminum-Alloy Sheet Metals(Part 1. Experiment))

  • 류호연;김영은;김종호;구본영;금영탁
    • 소성∙가공
    • /
    • 제8권2호
    • /
    • pp.152-159
    • /
    • 1999
  • This study is to investigate the effects of warm deep drawing with aluminum sheets of A1050-H16 and A5020-H32 for improving deep drawability. Experiments for producing circular cups and square cups were carried out for various working conditions, such as forming temperature and blank shapes. The limit drawing ratio(LDR) of 2.63 in warm deep drawing of circular cups in case of A5020-H32 sheet, whereas LDR of 2.25 in case of A1050-H16, could be obtained and the former was 1.4 times higher than the value at room temperature. The maximum relative drawing depth for square cups of A5020-H32 material was also about 1.92 times deeper than the depth drawn at room temperature. The effects of blank shape and forming temperature on drawability as well as thickness distribution of drawn cups were examined and discussed.

  • PDF

점화에너지 특성이 예혼합기의 착화와 연소에 미치는 영향(2) (Effect of Ignition Energy Characteristics on the Ignition and the Combustion of a Premixed Gas(2))

  • 이중순;강병무;김현수;정성식;하종률
    • 한국자동차공학회논문집
    • /
    • 제5권6호
    • /
    • pp.183-191
    • /
    • 1997
  • For the improvement of ignitability we need ignition energy and its discharge characteristics which are suitable for a part distribution of the mixture density around the ignition spark plug and the flow characteristics of the mixture in the combustion. Especially, for the solving of the instability of initial ignition and lean ignitability limit in the case of lean-burn combustion, the more powerful ignition energy is required. The conclusions from the observation can be summarized as follows: 1) The ignitability limit for HIS expands wider and the combustion is more stable than for CDI. 2) The combustion duration and ignition timing depend upon the distribution of local mixture density in the vicinity of ignition spark plug.

  • PDF

우리나라 동남부 일강수량의 도수분포곡선

  • 김석중
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
    • /
    • pp.207-210
    • /
    • 2003
  • In this research analyzed the daily precipitation depths of 4 climatic stations in south eastern part of Korea. It aimed to present some indices for regionalization of the area. The items are frequency distributions of precipitation quantity and days and the longest days less than class limit set up by arithmetic differences. The regression analysis between class value and frequency show very good correlation coefficients better than 0.99 which are cubic equation for the precipitation, exponential equation for the precipitation days, and first degree equation for the longest day less than class limit.

  • PDF