• International Journal of Internet, Broadcasting and Communication
• /
• 제13권1호
• /
• pp.134-142
• /
• 2021

This paper proposes a probabilistic method in analyzing timing measurements to determine the periodicity of real-time tasks. The proposed method fills a gap in existing techniques, which either concentrate on the estimation of worst-case execution times, or do not consider the stochastic behavior of the real-time scheduler. Our method is based on the Z-test statistical analysis which calculates the probability of the measured period to fall within a user-defined standard deviation limit. The distribution of the measured period should satisfy two conditions: its center (statistical mean) should be equal to the scheduled period of the real-time task, and that it should be symmetrical with most of the samples focused on the center. To ensure that these requirements are met, a data adjustment process, which omits any outliers in the expense of accuracy, is presented. Then, the Z-score of the distribution according to the user-defined deviation limit provides a probability which determines the periodicity of the real-time task. Experiments are conducted to analyze the timing measurements of real-time tasks based on real-time Linux extensions of Xenomai and RT-Preempt. The results indicate that the proposed method is able to provide easier interpretation of the periodicity of real-time tasks which are valuable especially in comparing the performance of various real-time systems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1321-1324
• /
• 2004

Unbalanced systems, such as distribution systems, have difficulties in fault locations due to single-phase laterals and loads. In this paper, a novel fault location algorithm is suggested for a line to line faults using inverse theorem of matrix on electric power lines. The fault location for balanced systems has been studied using the current distribution factor, by a conventional symmetrical transformation, but that for unbalanced systems has not been investigated due to their high complexity The proposed algorithms overcome the limit of the conventional algorithm using the conventional symmetrical transformation, which requires the balanced system and are applicable to any electric power system but are particularly useful for unbalanced distribution systems. The simulation results oriented by the real distribution system are presented to show its effectiveness and accuracy.

• 한국세라믹학회지
• /
• 제23권4호
• /
• pp.35-40
• /
• 1986

The production process of a fine size fraction of Korean kaolin by ball milling is studied in this paper by analyzing the size distribution the size distribution of products with the Rosin-rammle formular and the rate process of cumulative size fractions with Alyavdin-Chujyo's formular. The size distribution is found to be divided in three regions a coarser part influenced by feed size an intermediate part where the size distribution shows a clear straight line relationship on Rosin-Rammler chart and the finest part with the ultimate limit of fineness by ball milling. Alyavdin-Chujyo's relationship is found to be valid over a very wide range of milling conditions. For different feed sizes the Alyavdin-Chujyo's relationship gives a group of straight lines with a common intersection point which can be defined as the limiting point of the persistent component region.

• 한국환경과학회지
• /
• 제30권1호
• /
• pp.29-43
• /
• 2021

This study analyzed the status of climate-change indicator plants native to the main islands of the Korean peninsula, while elucidating their distribution characteristics. Information on flora from over 129 island locations, comprising more than 100 species of native plants, was collected, compiled into a database, and utilized as raw data. The distribution of 193 climate-change indicator plants was confirmed. The distribution area of broadleaf evergreen trees and ferns, including Mallotus japonicus and Cyrtomium falcatum, was relatively wide. In contrast, the distribution of common northern plants such as Corydalis turtschaninovii and Malus baccata was limited. If global warming persists, northern plant distribution is expected to decrease rapidly in the Korean Peninsula island region, while the northern limit line of the southern plants is expected to migrate further northward. During this process, it is likely that the plant congregation structure and species diversity within the island region will change dynamically. In this study, comparative analyses between species and regions were conducted by assessing the relative frequency of their occurrence, and six types of botanical geographic distribution patterns were noted.

• 한국농공학회지
• /
• 제22권3호
• /
• pp.46-59
• /
• 1980

This study was conducted to obtain the most effective distribution of grain size and the optimum lime content for lime-soil stabilization. To achieve the aim, the change of consistency, the characteristics of compaction and unconfined compressive strength were tested by adding of 0, 4, 6, 8, 10 and 12 percent lime by weight for all soils adjusted by given ratios of sand to clay. The results obtained were as follows; 1. There was a tendency that the plasticity index of lime-soil mixture was decreased by increasing the amount of lime, whereas the liquid limit was varied irregularly and the plastic limit was increased. 2. With the addition of more lime, the optimum moisture content of lime-soil mixture was increased, and the maximum dry density was decreased. 3. The optimum lime content of lime-soil mixture was varied from soil to soil, and the less amount of small grain size, the less value of optimum lime content. 4. The optimum distribution of grain size for lime-soil mixture was in the soil, having the ratio of about 60 percent of cohesive clay and about 40 percent of sand by weight. 5. In the soil having fine grain size, the effect of curing appeared for long periods of time, whereas the increasing rate of unconfined compressive strength was great on the soil of coarse grain size in the earlier stage of curing period.

• Geomechanics and Engineering
• /
• 제16권6호
• /
• pp.655-667
• /
• 2018

To evaluate the stability of a rock slope with one pre-exiting vertical crack, this paper performs corresponding probabilistic stability analysis. The existence of cracks is generally ignored in traditional deterministic stability analysis. However, they are widely found in either cohesive soil or rock slopes. The influence of one pre-exiting vertical crack on a rock slope is considered in this study. The safety factor, which is usually adopted to quantity the stability of slopes, is derived through the deterministic computation based on the strength reduction technique. The generalized Hoek-Brown (HB) failure criterion is adopted to characterize the failure of rock masses. Considering high nonlinearity of the limit state function as using nonlinear HB criterion, the multivariate adaptive regression splines (MARS) is used to accurately approximate the implicit limit state function of a rock slope. Then the MARS is integrated with Monte Carlo simulation to implement reliability analysis, and the influences of distribution types, level of uncertainty, and constants on the probability density functions and failure probability are discussed. It is found that distribution types of random variables have little influence on reliability results. The reliability results are affected by a combination of the uncertainty level and the constants. Finally, a reliability-based design figure is provided to evaluate the safety factor of a slope required for a target failure probability.

• 한국지반공학회논문집
• /
• 제35권6호
• /
• pp.17-26
• /
• 2019

이 연구에서는 쇄석말뚝공법의 한계상태설계법 적용을 위하여 양질의 현장재하시험 자료로부터 저항편향계수의 통계적 특성을 분석하고 지반 불확실성 및 시공 오차를 고려한 총 저항편향계수를 산정하였다. 저항편향계수 산정을 위한 예측모델은 기존 모델들에 비하여 높은 예측성능을 보인 Bong and Kim(2017)의 MLR 모형을 활용하였으며 그 적합성을 평가하였다. 저항편향계수의 확률분포를 산정하기 위하여 카이제곱 적합도 검정을 수행하였으며 정규분포가 가장 적합한 것으로 나타났다. 공칭저항의 총 변동성은 점토의 비배수전단강도 및 쇄석말뚝 시공 시 발생할 수 있는 시공 오차에 대한 불확실성을 포함하여 산정하였다. 최종적으로 총 저항편향계수의 확률분포는 로그정규분포를 따르는 것으로 나타났다. 총 저항편향계수의 변동성에 따른 확률분포의 매개변수는 Monte Carlo 시뮬레이션을 통하여 산정하였으며, 간편한 적용을 위하여 이에 대한 회귀식을 제안하였다.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.351-356
• /
• 2021

Korean nuclear power plants (NPPs) have various radiation protection programs to attain radiation exposure as low as reasonably achievable (ALARA). In terms of ALARA, this paper provides a comprehensive overview of administrative dose control for occupationally-exposed workers in Korean NPPs. In addition to dose limits, administrative dose constraints are implemented to resolve an inequity of radiation exposure in which some individuals in NPPs receive relatively higher doses than others. Occupational dose constraints in Korean NPPs are presented in this paper with the background of how those values were determined. For pressurized water reactors, 80% and 90% of the annual average limit for an effective dose, 20 mSv/y, are set as the primary and secondary dose constraints, respectively. Pressurized heavy water reactors (PHWRs) have also established the primary and secondary dose constraints corresponding to 70% and 80% of the effective dose limit, and additional constraints for tritium concentration are provided to control internal exposure in PHWRs. Follow-up measures for exceeding these administrative dose constraints are also introduced compared to exceeding the dose limits. Finally, analysis results of dose distributions show how the implementation of administrative dose constraints impacted the occupational dose distributions in Korean NPPs during the years 2009-2018.

• 응용통계연구
• /
• 제8권2호
• /
• pp.109-119
• /
• 1995

두 모집단에서 임의로 관측중단도니 두 표본을 얻었을 때, 두 모집단의 분포가 같다는 가설을 검정하기 위한 카이제곱 검정방법이 제안되었다. 여기서 제안된 통계량은 대립가설이 두 모집단의 분포가 같지 않다는 양측가설일 때 쓰일 수 있다. 귀무가설이 사실일 때 제안된 통계량의 극한분포는 카이제곱 분포가 된다. 두 가지 형태의 카이제곱 검정통계량이 제안되었는데, 하나는 product-limit 추정치로부터 얻은 관측된 칸(cell) 확률의 차이들의 벡터의 이차형식으로 표현된 것이고, 다른 하나는 간단한 합의 모양으로 표현된 것이다. 두 형태의 검정통계량을 사용하여 암치료를 위한 화학요법 실험으로부터 얻은 자료를 분석하여 보았다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.45-52
• /
• 1998

This study is to investigate the effects of warm deep drawing with aluminum sheets of A1050-H16 and A5052-H32 for improving deep drawability. Experiments for procucing circular cups and square cups were carried out for various working conditions, such as forming temperature and blank shape. The limit drawing ratio(LDR) of 2.63 in warm deep drawing of circular cups in case of A5052-H32 sheet, whereas LDR of A1050-H16 is 2.25, could be obtained and the former was 8 times higher than the value at room temperature. The maximum relative drawing depth for square cups of A5052-H32 material was also about 2 times deeper than the depth drawn at room temperature. The effects of blank shape, and temperature on drawability of aluminum materials as well as thickness distribution of drawn cups were examined and discussed.