• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.8 no.1
• /
• pp.9-15
• /
• 2022

Anti-cancer and therapeutic effects using therapeutic radioisotopes have been demonstrated by various studies, and it is well-known that therapeutic radioisotopes are useful in cancer treatment. Recently, one of the therapeutic radioisotopes, scandium is emerging as a radioisotope applicable to PET imaging (⁴³Sc, ⁴⁴Sc) and therapy (⁴⁷Sc) in cancer theranostic approach. However, ⁴⁷Sc has little known radiobiological and therapeutic efficacy compared to other therapeutic radioisotopes. Here, we investigated the quality and therapeutic efficacy of ⁴⁷Sc radioisotope produced by our production/isolation technology at the research reactor 'HANARO' in KAERI (Korea Atomic Energy Research Institute). We showed that the therapeutic efficacy of ⁴⁷Sc, produced by our production/isolation technology, effectively suppressed epidermal growth factor receptor (EGFR)-targeted non-small cell lung cancer (NSCLC) cells. Consequently, these results suggest that the high quality of the produced ⁴⁷Sc by our production/isolation technology enables the development of therapeutic strategies for cancer treatment and radiopharmaceuticals using ⁴⁷Sc.

• Journal of the Optical Society of Korea
• /
• v.1 no.1
• /
• pp.10-14
• /
• 1997

Single pulse laser excitation at 656 nm and successive pulse excitation at 635.2 and 648.4 nm produced blue emission at 480 nm by two-step upconversion process in Tm/sup 3+/:LaF/sub 3/. The excited-state absorption cross-section of the /sup 3/F/sub 4/ to /sup 1/G/sub 4/ transition was estimated by a looping mechanism with cross-relaxation processes. The dynamics of up-conversion andthe possibility of the photon avalanche by a pulse laser excitation were studied by numerical simulation with the rate equation model.

• Journal of information and communication convergence engineering
• /
• v.14 no.1
• /
• pp.40-44
• /
• 2016

The device coupling between the stacked top/bottom field-effect transistors (FETs) in two types of monolithic 3D inverter (M3INV) with/without a metal layer in the bottom tier is investigated, and then the regime of the thickness T_ILD and dielectric constant ε_r of the inter-layer distance (ILD), the doping concentration N_d (N_a), and length L_g of the channel, and the side-wall length L_SW where the stacked FETs are coupled are studied. When N_d (N_a) < 10¹⁶ cm^-3 and L_SW < 20 nm, the threshold voltage shift of the top FET varies almost constantly by the gate voltage of the bottom FET, but when N_d (N_a) > 10¹⁶ cm^-3 or L_SW > 20 nm, the shift decreases and increases, respectively. M3INVs with T_ILD ≥ 50 nm and ε_r ≤ 3.9 can neglect the interaction between the stacked FETs, but when T_ILD or ε_r do not meet the above conditions, the interaction must be taken into consideration.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.4
• /
• pp.37-41
• /
• 2018

$Y_3A_{l5}O_{12}:Ce^{3+},Pr^{3+}$ single crystal phosphor was prepared by floating zone method. single crystal was confirmed to have a Ia-3d (230) space group of cubic structure and showed regular morphology. The optical properties, single crystal exhibited a emission band from green, yellow wide wavelength and 610nm, 640nm red wavelength vicinity. The luminance maintenance rate was decreased by phonon with increasing temperature, but high luminance is maintained more than powder phosphor. In addition, $Y_3A_{l5}O_{12}:Ce^{3+},Pr^{3+}$ single crystal phosphor was applied to a high power blue laser diode, we implemented high power white laser lightings. and it was confirmed that thermal properties over time, due to the effective heat transfer of complete crystal structure. We confirmed that excellent radiant heat properties than powder phosphor was applied to a high power white laser diode.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.618-625
• /
• 2021

In this paper, the single-photon avalanche diodes (SPADs) featuring three different p-well implantation doses (∅_p-well) of 5.0 × 10¹², 4.0 × 10¹², and 3.0 × 10¹² atoms/cm² under the identical device layouts were fabricated and characterized to evaluate the effects of field enhanced mechanisms on primary dark pulses due to the maximum electric field. From the I-V curves, the breakdown voltages were found as 23.2 V, 40.5 V, and 63.1 V with decreasing ∅_p-well, respectively. By measuring DCRs as a function of temperature, we found a reduction of approximately 8% in the maximum electric field lead to a nearly 72% decrease in the DCR at V_ex = 5 V and T = 25 ℃. Also, the activation energy increased from 0.43 eV to 0.50 eV, as decreasing the maximum electric field. Finally, we discuss the importance of electric field engineering in reducing the field-enhanced mechanisms contributing to the DCR in SPADs and the benefits on the SPADs related to different types of radiation detection applications.

• Analytical Science and Technology
• /
• v.22 no.6
• /
• pp.519-523
• /
• 2009

$^{129}I$ is especially one of the most harmful radioactive elements because of its long half-life ($t_{1/2}$=$1.7{\times}10^7$ yr). The efficient removal of iodide ($I^-$) and iodate (${IO_3}^-$) in a aqueous solution by adsorption using activated alumina and activated carbon was studied. The removal efficiency was over 99% for iodide ion with silver treated basic alumina and iodate ion with acidic alumina or silver treated acidic alumina without any chemical addition or physical treatments.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.447-455
• /
• 2022

Fully dehydrated Tl₁₂-LTA (|Tl₁₂|[Si₁₂Al₁₂O₄₈]-LTA,Tl₁₂-A) was treated with 6.0×10³ Pa of ZrI₄ (g) at 623 K for 72 hr under anhydrous conditions. The crystal structure of product, |Zr_0.25I_1.5Tl₁₂|[Si₁₂Al₁₂O₄₈]-LTA, was determined by single-crystal crystallography using synchrotron X-radiation in the cubic space group Pm3m (a = 12.337(2) Å). It was refined using all data to the final error index (for the 712 unique reflections for which F_o> 4σ(F_o) R₁/wR₂= 0.055/0.189. In this structure, octahedral ZrI₆^2- ions center about 25% of the large cavities (Zr-I = 2.91(4) Å). Each coordinates to eight Tl⁺ ions and they are further bridged by Tl⁺ ions in the planes of 8-rings to form a cubic three-dimensional ZrI₆Tl₁₁⁹⁺ cationic cluster. About 1.5 Tl⁺ ions per unit cell moved to deeper side of sodalite cavity after reaction with ZrI₄(g). The remaining Tl⁺ ions occupy well-established cation positions near 6- and 8-rings.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1532-1536
• /
• 2020

For ensuring nuclear safeguards, we report the analytical signal-detection performance of thermal ionization mass spectrometry (TIMS) with continuous heating for the measurement of isotopic ratios in samples containing ultra-trace amounts of uranium. As methods for detecting uranium signals, peak-jumping mode using a single detector and static mode using multiple detectors were examined with U100 (10% ²³⁵U-enriched) uranium standard samples in the femtogram-to-picogram range. Uranium isotope ratios, n(²³⁵U)/n(²³⁸U), were measured down to levels of 1 fg and 3 fg in static and peak-jumping modes, respectively, while n(²³⁴U)/n(²³⁸U) and n(²³⁶U)/n(²³⁸U) values were measured down to levels of 100 fg in both modes. In addition, the dependency of the ²³⁸U signal intensity on sample quantity exhibited similar tendencies in both modes. The precisions of the isotope ratios obtained in the static mode over all sample ranges used in this study were overall slightly higher than those obtained in peak-jumping mode. These results indicate that isotope ratio measurements by TIMS with continuous heating are almost independent of the detection method, i.e., peak-jumping mode or static mode, which is characteristic of isotope-ratio measurements using the TIMS method with continuous heating. TIMS with continuous heating is advantageous as it exhibits the properties of multiple detectors within a single detector, and is expected to be used in various fields in addition to ensuring nuclear safeguards.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1210-1217
• /
• 2021

The analysis of ⁴¹Ca in concrete generated from the nuclear facilities decommissioning is critical for ensuring the safe management of radioactive waste. An analytical method for the determination of ⁴¹Ca in concrete is described. ⁴¹Ca is a neutron-activated long radionuclide, and hence, for accurate analysis, it is necessary to completely extract Ca from the concrete sample where it exists as the predominant element. The decomposition methods employed were the acid leaching, microwave digestion, and alkali fusion. A comparison of the results indicated that the alkali fusion is the most suitable way for the separation of Ca from the concrete sample. Several processes of hydroxide and carbonate precipitation were employed to separate ⁴¹Ca from interferences. The method relies on the differences in the solubility of the generated products. The behavior of Ca and the interfering elements such as Fe, Ni, Co, Eu, Ba, and Sr is examined at each separation step. The purified ⁴¹Ca was measured by a liquid scintillation counter, and the quench curve and counting efficiency were determined by using a certified reference material of known ⁴¹Ca activity. The recoveries in this study ranged from 56 to 68%, and the minimum detectable activity was 50 mBq g^-1 with 0.5 g of concrete sample.

• Journal of Korean Neurosurgical Society
• /
• v.67 no.2
• /
• pp.249-256
• /
• 2024

The Leksell frame-based transcerebellar approach was proposed with the arc support frame attached upside down to the Z coordinate. This study presented practical tips and considerations for obtaining adequate tissue samples for deep-seated cerebellar lesions or lower brainstem lesions specifically those accessible via the cerebellar peduncle. For practical insights, the Leksell coordinate frame G was fixed to prevent the anterior screw implantation within the temporalis muscle, to avoid interference with the magnetic resonance (MR)-adapter, and taking into account the magnetic field of MR in close proximity to the tentorium. After mounting of indicator box, the MR imaging evaluation should cover both the indicator box and the infratentorial region that deviated from it. The coordinates [X, Y, Za, Arc⁰, Ringa⁰] obtained from Leksell SurgiPlan^® software (Elekta, Stockholm, Sweden) with arc 0⁰ located on the patient's right side were converted to [X, Y, Zb=360-Za, Arc⁰, Ringb⁰=Ringa⁰-180⁰]. The operation was performed in the prone position under general anesthesia in four patients with deep cerebellar (n=3) and brainstem (n=1) tumors. The biopsy results showed two cases of diffuse large B-cell lymphoma, one metastatic braintumor and one glioblastoma. One patient required frame repositioning as a complication. Drawing upon the methodology outlined in existing literature, we anticipate that imparting supplementary expertise could render the stereotactic biopsy of infratentorial tumors more consistent and manageable for the practitioner, thereby facilitating adequate tissue samples and minimizing patient complications.