• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.294-301
• /
• 2016

This study was conducted to analyze the seedling quality of korean melon and the growth after transplanting of korean melon nursed under the LED sources. LED sources were RB7 (Red:Blue=14:2), RB3 (Red:Blue=12:4) and Blue(B=16). Photosynthetic photon flux density(PPFD) was 50, 100 and $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. The lighting treatment was started after graft-taken and was applied for 20 days at 4 hours(05:30 and 07:30, 17:30 and 19:30) per day. Plant height and stem diameter of scion were longer and thicker under a high ratio of blue light condition. Dry matter ratio and compactness were highest in RB3 compared to the other LED sources treatments. $CO_2$ exchange rate increased $5.44{\mu}molCO_2{\cdot}m^{-2}{\cdot}s^{-1}$ under RB7 $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and dropped to negative values under control. PPFD $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ of RB3 resulted in the longest plant height by 132.3cm and flowering ratio also was the highest by 75%.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.218-231
• /
• 2005

This paper reviews the engineering approach needed to support humans during their long-term missions in space. This approach includes closed plant production systems under microgravity or low pressure, mass recycling, air revitalization, water purification, waste management, elimination of trace contaminants, lighting, and nutrient delivery systems in controlled ecological life support system (CELSS). Requirements of crops f3r space use are high production, edibility, digestibility, many culinary uses, capability of automation, short stems, and high transpiration. Low pressure on Mars is considered to be a major obstacle for the design of greenhouses fer crop production. However interest in Mars inflatable greenhouse applicable to planetary surface has increased. Structure, internal pressure, material, method of lighting, and shielding are principal design parameters for the inflatable greenhouse. The inflatable greenhouse operating at low pressure can reduce the structural mass and atmosphere leakage rate. Plants growing at reduced pressure show an increasing transpiration rates and a high water loss. Vapor pressure increases as moisture is added to the air through transpiration or evaporation from leaks in the hydroponic system. Fluctuations in vapor pressure will significantly influence total pressure in a closed system. Thus hydroponic systems should be as tight as possible to reduce the quantity of water that evaporates from leaks. And the environmental control system to maintain high relative humidity at low pressure should be developed. The essence of technologies associated with CELSS can support human lift even at extremely harsh conditions such as in deserts, polar regions, and under the ocean on Earth as well as in space.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.3
• /
• pp.400-410
• /
• 2013

This study was carried out to investigate the effects of feeding the broilers that are exposed to extreme heat stress by control of inverse lighting times with night restricted feeding of extreme heat diet(EHD1, 2: extreme heat diet) containing different amount of soy oil, molasses, amino acids and vitamin C on short chain fatty acid and blood lipid profile. 300 broiler chickens(Abaica strain) were randomized into four dietary treatment groups according to a randomized block design on the day they were hatched. The four dietary treatment groups were: T1(EHD 1, 10:00~19:00 Dark, 19:00~10:00 Light), T2(EHD 2, 10:00~19:00 Dark, 19:00~10:00 Light), T3(EHD 1, 09:00~18:00 Dark, 18:00~09:00 Light), T4(EHD 2, 09:00~18:00 Dark, 18:00~09:00 Light). The body weight gain of the broilers was highest in T2, and high in order T1, T4, T3(p<0.05). Weights of the lymphoid organ, thymus and bursa of Fabricius were high in T1, T2 as compared to T3, T4 but spleen was lower in T4 than T1, T2, T3(p<0.05). Blood triglyceride, total cholesterol and glucose were higher in T1, T2 than T3, T4(p<0.05). LDL-C was high in orderT4, T3, T2, T1 but HDL-C showed the opposite trend(p<0.05). Blood concentrations of IgG, IgG and IgM were higher in T1, T2 than inT3, T4, but the corticosterone concentration decreased significantly in them. In T1 and T2, Lactobacillus in the feces increased, but total aerobic bacteria, E.coli, coliform bacteria was decreased rather significantly, compared with those in T3 and T4(p<0.05). Concentrations of acetic acid, propionic acid and total SCFA in cecum were high in order T2, T1, T3, T4, but butyric acid, isobutyric acid, valeric acid, isovaleric acid were lower in T1, T2 than in T3, T4 (p<0.05).

• Korean Journal of Optics and Photonics
• /
• v.24 no.5
• /
• pp.231-236
• /
• 2013

We investigated the optical design of a smart headlamp capable of producing various beam patterns through only on/off modulation of light sources. This was implemented by forming a continuous matrix of beams from discontinuous beam patterns by means of a multi-array LED optical system. As one such optical system, the multi-array LED system is a convenient and economical device for implementing beam patterns with the simple on/off modulation of the light sources. A single optical assembly module can be made by combining a multiple-LED array, optical system module, and electronic control with no need for any additional mechanical components. The present optical system was designed to include a secondary lens and a projection lens mounted at the front of each LED in the array to realize accurate lighting patterns as well as the required luminosity at a distance of 25 m in the forward direction. Finally, we identified and analyzed the patterns implemented by the designed optical system that produced satisfactory performance of high beams and adaptive driving beams (ADB).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.581-584
• /
• 2009

Recently, the cameras which used for observation are installed in children protection area and local crime prevention area in order to protect life and property and by its work being recognized and are installed more. Normal cameras have cost problem to observe multiple area and detail, because they can observe only one place. PTZ camera can observe multiple area by moving focus by schedule or remote control, but it can't automatically move the focus of it to the place where event occurred, because it can't recognize the place. In this study, we can monitor multiple area effectively, by installing a wireless sensor node equipped with temperature, lighting, gas and human detection sensor to each area, to monitor many place low-price and actively and to move the focus of PTZ camera to preset position, and send recorded video to the user, when the various sensor data received from wireless sensors in observation area are to be determined abnormal by analyzing. In addition, at night we can record a scene using infrared, but to reduce power consumption of lighting system which are installed to improve resolution, it supplies power to the lighting system when event occurred. So we were able to implement low power green monitoring system.

• Journal of Bio-Environment Control
• /
• v.30 no.3
• /
• pp.237-243
• /
• 2021

The objective of this study was to evaluate the effect of stem number on plant growth, fruit quality, and yield of sweet peppers grown in greenhouses under supplemental lighting in winter. The seedlings were transplanted at 3.2 plants·m^-2 on October 26, 2020, and started supplemental lighting with 32 high pressure sodium lamps for 16-hour photoperiod from December 1, 2020 to May 25, 2021. Stems were differently trained with 2 and 3 numbers after branching nodes were developed. In the final harvest, the plant height was significantly shorter in the 3 stem-plants than in the 2 stem-plants. The number of nodes per stem and the leaves per plant were increased in the 3 stem-plants than in the 2 stem-plants, while the leaf area was less affected. There were no significant differences in the dry mass of leaves, stems, and immature fruits between the 2 and 3 stem-plants. The fruit fresh weight and fruit dry weight in the 3 stem-plants were decreased by 17% and 12% at 156 days after transplanting (DAT), and by 17% and 15% at 198 DAT compared to those in the 2 stem-plants, respectively. The marketable fruit rates were 93.6% and 95.4% in the 2 and 3 stem-plants, respectively. The total fruit yield in the 3 stem-plants was increased by 30.2% as compared to that in the 2 stem-plants. We concluded that the 3-stem-training cultivation positively affected the total fruit yield by sustaining adaptive vegetative growth of the plants. This result will help producers make useful decisions for increasing productivity of sweet peppers in greenhouses.

• Journal of Platform Technology
• /
• v.6 no.3
• /
• pp.17-22
• /
• 2018

Smart home is a technology for monitoring and controlling all the information about a house by integrating various home applications like cooling, heating, lighting, kitchen and security systems into a network. Although home appliances have become more convenient to use due to the development of smart home technology, they are also more vulnerable to information security hazards. Unauthorized visitors may have access to any of home appliance to arbitrarily control it or acquire information. This causes serious privacy and security problems, which should be solved to further smart home technology. This present paper proposed a dynamic user access control system for privacy protection in smart homes. The proposed system defines the role of a user of smart home services by automatically identifying the status information of the user and dynamically controls the access range for the service. In this way, the privacy of a user can be protected and the inter-smart device service is effectively provided. Consequently, the proposed dynamic user access control for smart home will improve the security service for protecting privacy in smart home devices.

• KIISE Transactions on Computing Practices
• /
• v.22 no.12
• /
• pp.687-692
• /
• 2016

The advent of Internet of Things(IoT) has increased the need for development of smart life based on Information and Communication Technology(ICT). By using IoT technology, we are able to control connected appliances using smart devices, such as smart phone. To support the smart life, there is a need to utilize emotion information for human behavior, based on both biorhythm and environment information. Research towards this goal suggests a smart lamp control system that has an effect on the human emotion. According to the PSI theory, the control system calculates the biorhythm with an algorithm that uses the human biorhythm, weather factors and walking amounts. The smart lamp works with the recommended color lights that can control the feelings and emotions of the user. Here, we will show the effect of physical and mental stability, health care, and accident prevention.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.1 no.1
• /
• pp.57-61
• /
• 1974

The Study reported here was designed to analyze the prevalence of Dental Caries in the primary teeth of monozygote twins, and to ascertain and compare the intrapair differences with the intrapair differences in control pairs. The prevalence of dental caries in the primary teeth of 40 pairs of presumably monozygote twins, based on phenotypic analysis, was studied. The age range was from 3 to12 years. The control group consisted of pairs that included a twin chosen at random and an unrelated child of the same sex and age, so that for each pair of twins there was a corresponding control pair. The clinical examination was carried out by an operator using an oral mirror and sharp explorers, and with good lighting. 40 pairs of twins were examined with a total of 4,950 primary tooth surfaces (990 primary teeth) and 40 control pairs with a total of 4,935 primary tooth surfaces (987 primary teeth). Five surfaces were considered for each tooth. After the def individual index was determined, the ratio between this index and the number of examined surfaces was established in each case, the cer (Caries experience rate) index. The def and cer averages were determined for the subjects and the controls. All intrapair differences in twin and control groups were compared following the paired sampling method. The following conclusions were made: 1. Intrapair differences in the control group were significantly greater than in twins, when defs, ds, es, fs, and cer were compared. 2. The genotype appeared to be a determining factor in dental caries susceptibility or resistance, although the environment played an important role as well. 3. Intrapair differences in American children were significantly greater than in Korean when defs, es, fs, and cer were compared, but ds was equal.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.555-566
• /
• 2015

A TRIAC dimming LED driver that can control the brightness of LED arrays for a wide range of source voltage variations is proposed in this paper. Unlike conventional PWM LED drivers, the proposed LED driver adopts a TRIAC switch, which inherently guarantees zero current switching and has been proven to be quite reliable over its long lifetime. Unlike previous TRIAC type LED drivers, the proposed LED driver is composed of an LC input filter and a variable switched capacitance, which is modulated by the TRIAC turn-on timing. Thus, the LED power regulation and dimming control, which are done by a volume resistor in the same way as the conventional TRIAC dimmers, can be simultaneously performed by the TRIAC control circuit. Because the proposed LED driver has high efficiency and a long lifetime with a high power factor (PF) and low total harmonic distortion (THD) characteristics, it is quite adequate for industrial lighting applications such as streets, factories, parking garages, and emergency stairs. A simple step-down capacitive power supply circuit composed of passive components only is also proposed, which is quite useful for providing DC power from an AC source without a bulky and heavy transformer. A prototype 60 W LED driver was implemented by the proposed design procedure and verified by simulation and experimental results, where the efficiency, PF, and THD are 92%, 0.94, and 6.3%, respectively. The LED power variation is well mitigated to below ${\pm}2%$ for 190 V < $V_s$ < 250 V by using the proposed simple control circuit.