• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1111-1117
• /
• 2011

We was designed the portable LED light which can shadowless shooting and developed using a high-power LED that medical attention as a new lighting components for structural confirmation of oral dental area, medical and surgical lesions in the local area. LED which applied to the development, was used the 3-color LEDs for possible of implement a variety of colors and adjusted the light intensity. It is being magnified of delicacy expressiveness and three-dimensional for tone of the subject-specific. It has been developed a highly efficient light module that LED is used to consider the electrical characteristics and optical properties. SMPS has We was designed the portable LED light which can shadowless shooting and developed using a high-power LED that medical attention as a new lighting components for structural confirmation of oral dental area, medical and surgical lesions in the local area. LED which applied to the development, was used the 3-color LEDs for possible of implement a variety of colors and adjusted the light intensity. It is being magnified of delicacy expressiveness and three-dimensional for tone of the subject-specific. It has been developed a highly efficient light module that LED is used to consider the electrical characteristics and optical properties. SMPS has produced for use in mobile that can be driven at low voltage. In addition, it was also possible to implement a variety of colors from monochromatic Light to polychromatic light using by PWM control method and were available 32,768.

• KIEAE Journal
• /
• v.13 no.5
• /
• pp.59-66
• /
• 2013

Current Architectural Facade Designs have been trending to increased glass areas resulting in increasing impact on interior lighting and daylighting. In regards to indoor environmental quality, the increase in window space has a large impact on the daylighting received which ultimately impacts the liveability of a space. Especially when considering seasons, in the summer, excessive daylighting can result in glare as well as put an increased load in conditioning the air space further reducing energy efficiency. As a result, in order to improve the sustainability performance of a building, it is important to limit the natural lighting exposure to properly meet the needs and conditions of the building occupants. One of the most representative features to limit excessive sunlight exposure, is to incorporate operable blind systems. To this end, this research has been based on simulations performance through the Radiance Program. Radiance is capable of analyzing performance of daylight and impact of sunlight. Through analysis of different slat angles and blind shapes, impact and minimization of energy usage was evaluated. Furthermore, seasonal analysis was performed in order to understand the effects of seasonal climate factors. Ultimately this research provides an analysis of operable blinds optimization and effects of blind shape, control factors and angle of shading.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.388-393
• /
• 2018

In this paper, We developed a high efficiency reflector integrated type 50W AC direct connection type engine to realize miniaturization and weight reduction of product without using SMPS and to design a multistage varistor circuit Reduced costs by reducing the number of parts High reliability is achieved by using a circuit structure that does not use an electrolytic capacitor, thus increasing the lifetime of the LED. In addition, it is possible to manufacture an AC direct-coupled type driving device by using an IC semiconductor and apply an AC direct-coupled type driving device integrated with a reflector so that the lifetime of the device can be fully utilized for the lifetime of the LED, A light source having a plurality of light emitting diode channels including a plurality of light emitting diode channels arranged in series is driven with a rectified voltage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5195-5200
• /
• 2014

White LEDs are expected to be applied widely as a lighting system. To make white LED chips, one requires a mixture with silicon and a phosphor coating on a LED blue chip. The process of preparing a mixture with silicon using phosphor involves the use of discarded phosphor in the chip process. Reducing the costs of chip production depends on many factors, such as the mixture errors, exposure over time of silicon, and changes in the characteristics of blue chip. This paper reports the characteristics of a white LED chip manufactured through a reproduction process of derelict phosphor. This method was applicable to a real LED flashlight. A derelict phosphor chip showed similar results to a normal white chip for the degradation of cd 3.2[Cd] and 3.6[Cd], color temperature, 57[K] and 58[K], and maximum white wavelength 444.3[nm] and 449.8[nm]. These results are expected to make ea great contribution to cost reduction.

• Journal of Distribution Science
• /
• v.16 no.9
• /
• pp.59-63
• /
• 2018

Purpose - It has already been proved that 'mood' as the physical environment of shopping affects consumers' main sensory channels such as sight, hearing, smell, touch. However, there is no consensus on how the olfactory cue influences the customers in the shopping environment. In this study, we examine the previous studies on how the olfactory cue affects the customers in the shopping environment and present a clear direction as a suggestion for progressive research. Research design, data, and methodology - It is not important to use a lot of unconditional fragrance, but it should be exposed to the environment that suits the proper fragrance. In recent years, meaningful research on store fragrance has been slowly increasing. As a result, studies on the fragrance effects of retail stores have been conducted to verify the relevance of fragrance suitability in stores and consumer spending scale. Results - The fragrance appropriate for each store can not be uniformly specified as any fragrance. This is because external variables such as time, season, temperature, lighting, density of shoppers, and music in the store also affect customer evaluation. For example, using an unsuitable fragrance may encourage customers to leave the store quickly by restraining impulsive purchases or by disturbing concentration. The store manager should also be interested in using fragrances that are proven and effective in the store environment, but they should also have the ability to easily manipulate and manage the fragrances very appropriately according to changes in the store environment. Store managers should observe consumer preferences and responses according to their goals and strategies, and then systematically manage and store information about the fragrance appropriate to the store. Conclusions - In the future, the fragrance marketing researcher needs to consider the spatial form and density of the customer. In practice, managers operating a retail store should check the most appropriate store density(congestion) according to the size and spatial characteristics of the store and maintain the ideal conditions. To do this, it is necessary to pay attention to how to select and control sensory elements such as fragrance(olfactory), music(auditory), and lighting(visual).

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.1
• /
• pp.49-55
• /
• 2011

Sound insulation performance of a unit cabin mock-up is studied, where two identical rooms simulating cruise ship cabin are installed. STL (Sound Transmission Loss) measurement in the mock-up shows that STL of the partition between rooms is degraded by imperfect door ceiling and gap between wall and floor. It is also observed that gap around lighting and electrical outlet slightly affect the STL in high frequency ranges, since lighting and electrical outlet are supported by mineral wool in the back side due to fire-resistance requirement. Even after all possible gaps are sealed, STL of the partition is found to be lower than that measured in the laboratory by 9 dB. Measurement of SBN (Structure-Borne Noise) reveals that flanking transmission of SBN along the steel deck floor can severely deteriorate STL of the partition. Statistical energy analysis (SEA) of the mock-up confirms importance of the floor SBN control, in which increasing damping is essential to ensure high STL.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.4
• /
• pp.358-365
• /
• 2011

Recently, the LED(Light Emitting Diode) replacing incandescent light bulbs and fluorescent light has great attentions as a most promising candidate for the next generation lighting source due to its environment-friendly characteristics, long life and excellent efficiency. Moreover, since it is a semiconductor device which can convert the electric energy to visible light at a very high speed, it can also used as a communication device. Therefore, the VLC(Visible Light Communication) using the LED can perform the near field communication and lighting function at the same time without additional expenses. However, since the switching device of the conventional LED driver for VLC is operated in the linear region, there exist several drawbacks such as a poor power conversion efficiency and serious heat generation. On the other hand, since the proposed driver is operated in the on/off switching region, it features a higher efficiency and more improved heat generation. To verify the validity of the proposed LED driver, experimental results from a prototype of 20W rated LED driver applied to 3MHz bps broadcasting audio system are given.

• Journal of Korean Institute of Architectural Sustainable Environment and Building Systems
• /
• v.12 no.6
• /
• pp.669-679
• /
• 2018

Energy consumption savings in buildings should be reviewed in diverse areas such as air conditioning system and lighting responsible for cooling and heating, and energy management systems such as BAS (Building Automation System) and BEMS (Building Energy Management System) are introduced to improve energy consumption efficiency and to promote economic control of related facilities by integrated management of energy generated and consumption in buildings. The measured building of this study uses regenerative geothermal system. Measured values of heat pump and system COP were 4.7 and 4.2 respectively, and they were found to be higher 11.9% and 23.5% than rated values. As a result of analyzing the air conditioning and lighting energy from the first floor to the fourth floor performing the air conditioning, the second and third floors, which have a high frequency of use, are compared with the first and fourth floors 50% higher energy consumption ratio. On the other hand, the general heat storage system uses the nighttime power of the previous day to store heat and use it the next day. The total number of days of abnormal operation during the summer season is 61 days. The electricity cost corresponding to the abnormal operation is 1,840,641 KRW, and the normal operation using the nighttime power is 1,363,561 KRW, which is difference of 477,080 KRW, 35% increase in cost. We will utilize it as the main data of BEMS through analysis of winter operation characteristics as well as summer operation characteristics.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.25-30
• /
• 2021

In this paper, we studied the coding technique for flicker mitigation and BER performance improvement in visible light communication system. In order to increase the transmission speed of visible light communication, a multi-transmission multi-LED transmission system using a plurality of LEDs is being actively studied. However, when data is transmitted through N LEDs in a multi-LED visible light communication system using N LEDs, there is a continuous zero section in which 0 is transmitted simultaneously according to the data sequence, and since the transmission section of 1 is different, flickering Or, a phenomenon in which the dimming level changes occurs. The visible light communication system is a communication system that simultaneously performs communication and lighting functions. Therefore, transmission efficiency of communication and brightness of lighting must be considered at the same time. To solve this problem, we proposed a flicker reduction mapping that can alleviate flicker and dimming level problems, improve error detection and BER performance through coding mapping of each LED data sequence.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.186-195
• /
• 2017

Recently, autonomous vehicles have been studied actively. There are various technologies such as ITS, Connected Car, V2X and ADAS in order to realize such autonomous driving. Among these technologies, it is particularly important to recognize where the vehicle is on the road in order to change the lane and drive to the destination. Generally, it is done through GPS and camera image processing. However, there are limitations on the reliability of the positioning due to shaded areas such as tunnels in the case of GPS, and there are limitations in recognition and positioning according to the state of the road lane and the surrounding environment when performing the camera image processing. In this paper, we propose that LED lights should be installed for autonomous vehicles in tunnels which are shaded area of the GPS. In this paper, we show that it is possible to measure the position of the current lane of the autonomous vehicle by analyzing the color temperature after constructing the tunnel LED lighting simulation environment which illuminates light of different color temperature by lane. Based on the above, this paper proposes a lane positioning technique using tunnel LED lights.