• 대한치과보철학회지
• /
• 제41권5호
• /
• pp.565-581
• /
• 2003

Statement of problem : A scientific examination and understanding of overall aspects of the natural dentition is the first step involved in making a satisfactory selection in the shade of an aesthetic prosthesis. Proper natural shade selection of the prosthetic restoration that is in harmony with the remaining dentition is as important aesthetically, as harmony of form and function in the anterior dentition. Clinically, the most commonly applied method of shade selection has been visual, but because of the subjective nature inherent to this method, shade selection results are variable and can be influenced by such factors as the technician, the type of shade guide used, and the type and intensity of the lighting. Purpose : The purpose of this study was to develop a more objective and scientific approach to examining and understanding the shade of teeth, which has in turn lead to the development of a number of shade analysis devices that present a more objective method of shade analysis. Material and Method : In this study, the shades of healthy anterior teeth were examined and analyzed using the recently developed digital shade analysis of the $ShadeScan^{TM}$ System. The study examined 80 individuals in their twenties, 40 males and 40 females, presenting 6 healthy, unrestored maxillary anterior teeth. Tooth brushing and oral prophylaxis were performed prior to evaluation. The ShadeScan handpiece was used to acquire images of the 6 maxillary anterior teeth. These images were analyzed using the Vita/Classical mode of the $ShadeScan^{TM}$ Software, and shade maps of each tooth were acquired and divided into cervical, middle, and incisal thirds. The shade distribution of each third, left and right symmetry, and gender differences were investigated and analyzed. Results : The results of the study are as follows : 1. An overwhelming majority of the examined teeth were found to possess shades belong to Group A, with the greatest variations occurring at the middle and cervical thirds of the maxillary central and lateral incisors, in both male and female subjects. 2. Canines of both male and female subjects showed left and right symmetry with uniform shade distribution of A4 and C4, while the lateral and central incisors showed left-right symmetry of the incisal 1/3 with a uniform shade distribution of A2 and A3 shades 3. No significant differences in shade distribution were seen between genders in maxillary canines, whereas maxillary central and lateral incisors showed differences at the middle and cervical thirds between male and female subjects The results of this study show that with the exception of maxillary canines, maxillary anterior teeth display a diverse shade distribution as well as gender differences. Conclusion : Clinically, when making a shade selection using the existing shade guide, one must consider the fact that even a single tooth consists of a variety of shades. The results of this study show that when selecting a shade from a number of groups is difficult, shades from A group are the most consistent with the natural shade or maxillary anterior teeth.

• 수산해양기술연구
• /
• 제45권2호
• /
• pp.85-95
• /
• 2009

The fishing lamp is a fishing gear that gathers fish at night. But the cost of oil, which is used to light fishing lamp, has been risen significantly up to 30-40% of total fishing costs. Therefore it is very urgent to develop an energy economical fishing lamp in order to solve the business difficulties of fisheries. Under this background, this research aims at developing a fishing lamp for squid jigging and hairtail angling fishery using the LED, which has excellent energy efficiency and durability. The LED fishing lamp developed can be controlled to fix a fit direction of fish shoal deep because a fishing lamp can be adjustable up and down directions. One unit of fishing lamp has about an 80Watt capacity and the frame of fishing lamp is made of aluminium to emit generated heat of LED to outside. The LED lamp developed was highly durable, only 5.7% of emitting efficiency decreased for 18 months. The illuminance of a unit LED lamp was 2,070lux at 1m and 21lux at 10 m distance, and the intensity of LED lamp system emitted 2,580lux and 400lux at the respective distances. After development of this fishing lamp, 100 units are installed on operating fishing vessels. Experimental results show that energy consumption of squid jigging and hairtail angling was reduced by 40% and 87%, respectively. In conclusion, our methods showed elevated fishing power, compared with traditional fishing method: 37.7% for squid jigging and 24.5% for hairtail angling.

• 한국환경과학회지
• /
• 제25권4호
• /
• pp.473-481
• /
• 2016

We examined the effects of ocean acidification (OA) and eutrophication on the physiology of a red alga, Gracilariopsis chorda, using specimens collected at Wando Island, Korea, in July of 2015. The samples were transported to a laboratory and placed on growth media for treatments involving low or high levels of ammonium ($4{\mu}M$ or $60{\mu}M\;NH_4{^+}$) and low or high pH(7.5 or 8.2). The control treatment used filtered seawater (pH 8.2 and $4{\mu}M\;NH_4{^+}$). All experiments were conducted at $20^{\circ}C$ and under a lighting intensity of $80{\mu}mol\;photons\;m^{-2}\;s^{-1}$, with or without an injection of $CO_2$ (pH 7.5). In addition, we calculated rates of respiration under darkness, at a pH of 7.5 and $60{\mu}M\;NH_4{^+}$. Fluctuations in pH as well as the evolution of photosynthetic oxygen and $NH_4{^+}$ uptake rates were monitored for 6 h. The greatest increase in pH levels, from 7.50 to 8.65, occurred in response to $60{\mu}M\;NH_4{^+}$, whereas the largest decrease, from 7.50 to 7.42, was associated with elevated respiration rates. At a pH of 7.5, rates of oxygen evolution were higher (236% saturation) for samples treated with $60{\mu}M\;NH_4{^+}$ than for the control (121% saturation). Ammonium uptake was highest at pH 7.5 and $60{\mu}M\;NH_4{^+}$, with a rate of $0.526{\pm}0.002{\mu}mol\;g^{-1}\;FW\;h^{-1}$, followed in order by the treatments of $pH\;8.2/60{\mu}\;NH_4{^+}$, $pH\;7.5/4{\mu}M\;NH_4{^+}$, and the control ($pH\;8.2/4{\mu}M\;NH_4{^+}$). We speculated that the rates of photosynthesis and $NH_4{^+}$ uptake could be enhanced at a higher ammonium concentration and lower pH because $CO_2$ concentrations were increased through greater photosynthetic activity. Therefore, these findings suggest that the physiology of G. chorda populations can be improved by the interaction of optimized $CO_2$ concentrations and an adequate supply of essential nutrients such as ammonium.

• 한국HCI학회논문지
• /
• 제1권1호
• /
• pp.37-44
• /
• 2006

물체의 반사 효과는 물체의 재질, 기하학적 모양 및 조명 환경을 표현하는데 있어 매우 중요한 요소이다. 사진품질을 추구하는 사실적 렌더링에서는 기존의 국소 반사 모델을 사용하여 좋은 결과를 얻을 수 있지만, 사용자의 주관이 중시되는 비사실적 렌더링에서는 사용자가 원하는 반사 효과를 표현할 수 있어야 한다. 텍스처는 사용자가 원하는 반사 효과를 직관적으로 표현할 수 있는 수단이며, 이 텍츠처를 모델에 투영하면 원하는 반사 효과를 얻을 수 있다. 이 때 사용자는 텍스처가 투영될 위치와 크기, 방향을 직접 키프레임으로 정해 줄 수 있다. 그러나 모든 반사 효과를 사용자가 직접 정해준다는 것은 번거로운 일이며, 아울러 실시간 응용분야에는 적용할 수 없는 단점이 있다. 본 논문에서는 국소반사모델과 주곡률 해석을 통해 반사 효과의 위치, 방향 및 크기를 결정하기 위한 텍스처 투영기의 새로운 설정 방법을 제시한다. 광원과 시점 정보로부터 주어진 모델 위에서 최대 명점을 구한 후, 텍스처 투영기를 최대 조명점을 지나는 법선 벡터에 평행한 직선 위에 위치시킨다. 투영기의 방위를 최대 조명점에서의 주방향에 따라서 일치시키고, 투영기의 투영 피라미드의 크기를 주곡률에 따라서 결정한다. 텍스처 투영기의 단순한 이동, 회전 및 주곡률 값의 조절을 통하여 반사 영역의 이동, 회전 및 확대/축소가 가능하다. 본 논문에서 제시한 방법은 DirectX 9.0c와 프로그램이 가능한 셰이더 2.0을 사용하여 GeForce FX 7800 그래픽 카드에 구현되었다. 본 논문의 연구 결과는 만화적 표현을 추구하는 게임 등과 같은 실시간 응용분야에 사용될 수 있으며, 실험 결과에 의하면 수만 개의 다면체 모델에 대한 스타일 반사효과를 실시간에 렌더링할 수 있다.

• 수산해양기술연구
• /
• 제52권3호
• /
• pp.183-190
• /
• 2016

This study carried out an experiment to find out the reaction of hairtail, Trichinus lepturus to the colors of LED light as a basic study on the development of the trolling gear and a method to enable the day-night operation. We used hairtails caught around Seongsan-po, Jeju Island by set nets and hairtail angling. The seven hairtails of the average length 68.9 cm (SD 9.2 cm) and the average weight 135.9 g (SD 47.9 g) were adapted themselves in the experimental water tank, 15 m Self-Governing 1.7 m in height and 1.5 m in depth, and then they were studied. We conducted experiment at the Ocean and Fisheries Research Institute in Jeju Special Self-Governing Province, from November to December 2015, and the sea surface temperature was between 16.5 and $19.5^{\circ}C$. The four colors of LED light, blue, white, green and red, were set up to transmit downward from the marginal area of tank. The 1 meter depth light intensity of LED colors is as follows: $0.09w/m^2/s$ (blue), $0.18w/m^2/s$ (white), $0.04w/m^2/s$ (green) and $0.007w/m^2/s$(red) To know the optimum LED color light, we selected one with better reaction rate after comparison of two colors simultaneously and the selected color was again compared to the other color in a tournament style two times a day (day and night) and ten times totally. The reaction rates were shown as the frequencies of hairtail appearance for 5 minutes in the lighting zone after turning on the LED lights. The reaction rate of the blue was at 97% unlike the red 3% (p < 0.001). The blue was at 75% unlike the green at 25% (p < 0.001). The blue was at 67% unlike the white at 33% (p < 0.001). Therefore, the color of light source showing the highest reaction rate was the blue.

• 디지털융복합연구
• /
• 제14권4호
• /
• pp.419-424
• /
• 2016

본 논문에서는 광학설계 프로그램을 이용하여 LED 광원의 위치 변화에 따른 배광분포에 대하여 연구하였다. 사용한 LED 조명기구는 엣지형의 LED 배열을 이용하였으며 반사판을 중심으로 도광판 및 확산판을 위와 아래에 배치한 구조이다. LED 칩을 반사판 에지 중심에서 위로 1mm, 2mm 및 3mm로 위치를 바꾸어 시뮬레이션 하였다. LED 칩이 중심에 위치한 경우는 전반확산 배광분포를 보였으며 2mm 이상에서는 효율 0.56의 반직접 배광 분포를 보였다. 3mm 위에 LED 칩을 위치시키면 0.31 효율을 갖는 직접 배광분포를 갖는 배광특성을 나타내었다. 도광판은 평면형 보다 칩 위치에서 밖으로 작아지는 쐐기형의 구조에서 더 좋은 효율을 나타내었다. 그리고 반사면에 반구형의 형상을 0.015mm 씩 증가시키며 방사 형태로 배치한 경우는 파워 1.02W, 효율 0.25, 최대광도 0.104W/sr로서 패턴을 형성하지 않은 경우보다 더 우수한 광 특성을 얻을 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술회의 초록집
• /
• pp.16-16
• /
• 2010

GaN-based light-emitting diodes (LEDs) are attracting great interest as candidates for next-generation solid-state lighting, because of their long lifetime, small size, high efficacy, and low energy consumption. However, for general illumination applications, the external quantum efficiency of LEDs, determined by the internal quantum efficiency (IQE) and the light extraction efficiency, must be further increased. The IQE is determined by crystal quality and epitaxial layer structure and high value of IQE more than 70% for blue LEDs have been already reported. However, there is much room for improvement of light extraction efficiency because most of the generated photons from active layer remain inside LEDs by total internal reflection at the interface of semiconductor with air due to the high refractive index difference between LEDs epilayer (for GaN, n=2.5) and air (n=1). The light confining in LEDs will be reabsorbed by the metal electrode or active layer, reducing the efficacy of LEDs. Here, we present the first demonstration of enhanced light extraction by forming a MgO nano-pyramids structure on the surface of vertical-LEDs. The MgO nano-pyramids structure was successfully fabricated at room temperature using conventional electron-beam evaporation without any additional process. The nano-sized pyramids of MgO are formed on the surface during growth due to anisotropic characteristics between (111) and (200) plane of MgO. The ZnO layer with quarter-wavelength in thickness is inserted between GaN and MgO layers to increase the critical angle for total internal reflection, because the refractive index of ZnO (n=1.94) could be matched between GaN (n=2.5) and MgO (n=1.73). The MgO nano-pyramids structure and ZnO refractive-index modulation layer enhanced the light extraction efficiency ofV-LEDs with by 49%, comparing with the V-LEDs with a flat n-GaN surface. The angular-dependent emission intensity shows the enhanced light extraction through the side walls of V-LEDs as well as through the top surface of the n-GaN, because of the increase in critical angle for total internal reflection as well as light scattering at the MgO nano-pyramids surface.

• 한국동물위생학회지
• /
• 제31권1호
• /
• pp.161-166
• /
• 2008

Deep pectoral myopathy (DPM), also known as Oregon muscle disease or green muscle disease, was first described in 1968 by Dickinson et al as "degenerative myopathy" in turkeys. Even though this condition was first recognized in adult meat-type turkey and chicken breeders, it is becoming more and more common in meat-type growing birds. DPM occurs exclusively in birds that have been specially selected for breast muscle development. It is generally recognized that DPM is an ischemic necrosis that develops in the deep pectoral muscle (supracoracoideus or pectoralis minor muscle) mainly because this muscle is surrounded by inelastic fascia and the sternum, which do not allow the muscle mass to swell in response to the physiological changes occurring when muscle are exercised, as in wing flapping. The lesion does not impair the general health of birds and is generally found during cut-up and deboning, moreover, it can be both unilateral or bilateral, affecting just one or both pectoralis minor muscle, respectively. No public health significance is associated to DPM, but it is aesthetically undesirable. The fillet should be removed, whereas the rest of the carcass is still fit for human consumption. However, the required trimming operations determine the downgrading of the products and produce an economic loss for the industry, especially because it affects the more valuable part of the carcass. The incidence of DPM increases with market weight in broilers, with more cases reported in higher-yielding strains and in males. Increased bird activity (flock nervousness, flightiness, struggle, and wing flapping) induced by factors such as feed or water outages, lighting programs and intensity, human activity, and excessive noises in and around chicken houses should be looked at as a trigger for the development of DPM in broiler. However, most of the studies conducted to evaluate the incidence of DPM in poultry are concerned with parental commercial breeding stocks under experimental conditions (Bianchi et al. 2006. Poult Sci 85 : 1843-1846). There is a possible genetic relationship between the selection for large-breasted birds and this condition. Management procedures that discourage excessive wing flapping would reduce the incidence (Jordan and Pattison. 1998. Poultry diseases. 398-399).

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.

• 정보처리학회논문지B
• /
• 제11B권3호
• /
• pp.327-336
• /
• 2004

일반적인 공장환경에서 적용할 수 있는 비젼 검사시스템의 개발을 위해서는 안정적이면서도 고속 패턴정합을 수행하는 알고리즘의 개발이 필요하다. 본 논문에서는 전탐색 회피기법을 이용하는 자동화용 패턴검사를 위한 에지 기반의 점상관 고속 알고리즘을 제안한다. 이 알고리즘은 탐색할 영상의 에지특성을 분석함에 의해 전탐색을 회피함으로써 탐색복잡도를 크게 개선한다. 농담정규화정합(NGC)법을 사용하는 통상적인 검사 알고리즘은 공장환경에 적용할 매 몇가지 문제점을 극복해야 한다. 첫 번째는 과도한 계산량으로 고속동작을 가능하게 하기 위해 특별한 알고리즘의 설계가 필요하며 고속 하드웨어의 사용을 요구한다 두 번째는 불안정한 조명조건 하에서도 신뢰성 있는 검사결과를 주어야 한다는 것이다. 전통적인 NGC 알고리즘은 조명의 불안정에 따라 검사결과가 크게 변동하는 특성을 가지고 있다. 본 논문에서는 이러한 단점을 극복하기 위해 에지 기반의 점상관 알고리즘을 제안한다. 계산량을 개선하기 위해 전탐색 회피 알고리즘을 개발하여 적용하고, 에지 피라미드 구조를 탐색에 T입하여 실시간에 근접하는 시간 복잡도를 달성한다. 제안된 방법들은 실제 영상에 적용하여 신뢰성을 검증한다