• 조명전기설비학회논문지
• /
• 제23권8호
• /
• pp.1-7
• /
• 2009

본 연구는 도로의 조명 방식을 기존의 높은 폴 조명 방식에서 낮은 위치의 조명방식으로 새롭게 접근하여 도로의 내 외부 경관의 시 환경을 쾌적하게 하고, 장해 광(눈부심 후사 광)의 요소를 제거하는 환경 친화적인 조명 방식을 제시하고자 하였다. 도로경관이 중요하게 되고 있는 현 추세를 고려하여 경관적인 요소로서의 역할을 위한 미려한 디자인을 중심으로의 연구내용을 제시하였다. 이를 위하여 국내외 낮은 조명의 이용실태를 조사하고, 개선사항을 찾고자 하였으며, 보다 효율을 높일 수 있는 방안을 모색하였다. 또한 낮은 조명의 설치가 이루어지게 되는 도로의 주요 시설물에 대한 자료 및 현장조사를 통하여, 조명기구의 설치 표준을 제시하였고, 국내 실정에 적합한 낮은 조명의 개발방향과 조명기구 디자인의 방향을 제시하였다.

• 설비공학논문집
• /
• 제28권3호
• /
• pp.115-122
• /
• 2016

In this study, 21 energy reduction factors were selected as architecture, system & operation, and lighting and equipment parts to analyze reduction method of the load occurring in office buildings. Energy consumption simulation was performed. In the architecture part, saving rate (1.53%) of "occupant density" factor was the most efficient. In the system and operation part, saving rate (1.28%) of "interior VAV and exterior FPU type" factor was the most efficient. In case of lighting and equipment part, saving rate (12.42%) of "schedule" factor was the most efficient. In the three parts, saving rate of the lighting and equipment part was 27.32%. This was caused by the "schedule" factor. Saving rates of the architecture part and the system and operation part were 3.39% and 1.20%, respectively.

• 한국실내디자인학회논문집
• /
• 제1호
• /
• pp.72-75
• /
• 1992

Lighting made interior space visible and to recognize space itself. Sp9ace and form are established not themselves , but lighting. and dextrous treatment of natural light accomplished poeteic space. Inflowing of lighting in interior space is main factor to decide space character and image . That was recognized in interior space through many centries. At this point, this study was described for that present inflowing of lighting adapting space character and right method in lighting program. The present study is to present the planning method of the most appropriate and the most rational natural lighting in planing for lighting. Under this premise the followings are made ; I. An introduction , the purpose, the sphere, and the method of this study are stated. II, The present writer studied the general characteristics of natural lighting. III. this author studied the factor of decision on control and representation skill of lighting along the following. IV. Analyzing interior space in which the natural lighting is introduced through some literature and case studies. Physics, psychology, structure, equipment, material. V. The last, the author rearranged the results of this study.

• 전기학회논문지P
• /
• 제55권4호
• /
• pp.161-166
• /
• 2006

In this paper, an automatic lighting control system is developed using microprocessor. The developed system consists of a digital lighting control unit, an analog lighting control unit, and a lighting control simulator. In the developed system, ATMega128 is used as the main controller. The developed digital lighting control unit consists of eight modules and the developed analog lighting control unit consists of six modules respectively. Additional, the developed simulator consists of a digital and an analog lighting control simulation using graphic user interface. And so this developed system can be applied to the controller design of the interior and exterior lighting equipment.

• 한국안전학회지
• /
• 제33권1호
• /
• pp.35-40
• /
• 2018

This research aimed to develop an leakage detector of analyzing the electric potential generated from the electric leakage of electric equipment of the fountain. To accomplish this goal, the potential gradient was analyzed against path 1 ~ path 4; this was done by taking the lighting of a fountain as the electric leakage point based on code analyses in Korea and other countries. Lighting 1 was taken as the electric leakage point, and the earthing point was set against lightings(2~3). It appeared that the allowable touch voltage against the 1 type(under 2.5 V) exceeded 60.0%. Therefore, the lighting of fountain turned out to be the most dangerous point, and electric shock could be formed by the electric leakage of electric equipment in underwater as well as by the lighting. An leakage detector was developed based on this risk; this detector is capable of analyzing the electric potential of a electric equipments of the fountain in underwater. Then, a verification test was carried out. This leakage detector can be used to measure electric potential in various submerged areas such as swimming pools, flooded spaces, and fountains.

• 한국조명전기설비학회지:조명전기설비
• /
• 제1권2호
• /
• pp.31-36
• /
• 1987

• 설비공학논문집
• /
• 제23권9호
• /
• pp.604-609
• /
• 2011

The increased quality of life requires indoor illumination environment to have illumination with higher intensity. The increase in indoor illumination goes hand in hand with increase in indoor heat load. Of late, the internal heat in the cooling load has been growing gradually and the proportion of the lighting load has been bigger in the cooling load. The objective of the experiment here is to estimate the proper exhaust air flow displacement to remove heat from different types of lighting equipment. The heat causing the cooling load in lighting equipment is the ratio of heat per watt and the ratio of space for heat. Experimental measurements of the constant temperature and humidity in chambers that exhaust air flow by changing the exhaust calorific value was measured. Using the Airflow exhaust heat from lighting fixture of this study should help to reduce House cooling load.

• 조명전기설비학회논문지
• /
• 제26권11호
• /
• pp.20-29
• /
• 2012

The outdoor lighting is provided for a variety of purposes, for work or recreation, for safety or security, for amenity and for advertising or display. But the effects of lighting on the natural environment can be difficult to quantify. At present, in many countries, various policies to manage the light trespass from outdoor light have been planned. For example, Model Lighting Ordinance(MLO) will allow communities to drastically reduce light pollution and glare and lower excessive light levels. The recommended practices of the IES can be met using readily available, reasonably priced lighting equipment. So, it this paper, we analyze the effect of road lighting on light trespass using by RELUX program. And then we consider the possibility of practical application of BUG rating in Korea.

• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.488-492
• /
• 2013

Current limiting diode (CLD) was fabricated using junction field effect transistor (JFET) structured two small cells and eight large cells. Two small cells and eight large cells were connected in parallel and the obtained constant current was 110 mA. The application of CLD in each of the parallel circuits on chip on board (COB) type LED lighting source, could significantly reduce the current deviation within the parallel circuits. The applications of CLD on AC power small lighting source, battery power low voltage parallel lighting source and AC flat lighting source were investigated.

• 대한설비공학회지:설비저널
• /
• 제38권12호
• /
• pp.100-107
• /
• 2009