• Journal of the Korean Solar Energy Society
• /
• v.29 no.1
• /
• pp.11-17
• /
• 2009

Daylighting is core of sustainable design in most buildings. Well-designed daylighting systems can significantly reduce or even eliminate the electric lighting loads during the day time, including air conditioning energy loads. Among window systems. the topside lights systems including monitor lighting, sawtooth lighting, sunscoop and, lightscoop is one of the most popular apparatus to improve the lighting quantity. Also they are important both in terms of energy savings and visual quality. The objective of this study is to analyse daylighting performance of topside lighting system for different orientations. Four types of topside lighting system were tested and comparpd: monitor lighting, sawtooth lighting, lightscoop and sunscoop. Totally 25 measuring points of illuminance on the horizontal plane were monitored from 09:00 to 17:00 on October 6, 2008. Agilent data logger and photometric sensors Li-cor were used. Comparisons with a light factor is discussed. The results found in this study would mean that there were no significant differences in light factor between three cases.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.217-221
• /
• 1999

This report investigates the road lighting systems by using the road lighting simulation system which is the 'Lightscape', and compares the result of the simulation with criterion of the road lighting system. The solution of that is almost equal to the criterion of the road lighting system. With this simulation, we hope to accurately investigate the criterion of the road lighting systems and design the road lighting systems effectively.

• KIEAE Journal
• /
• v.8 no.1
• /
• pp.45-52
• /
• 2008

Daylighting systems can improve the luminous quality of indoor environment and reduce the building's electric lighting energy consumption. For designing good daylighting, place the light where it is desired and avoid excessive contrasts, glare and high light levels. Sun scoop, light scoop and sun catcher systems have been used for alternative systems compared to other natural lighting systems. This study aims to evaluate daylighting performance of sun scoop, light scoop and sun catcher systems using scale model experiments. For the purpose, the 1/10 scale models of the systems were made as the same areas of glazing(10 percent of floor area) on the top of the center roof. Totally 15 measuring points of illuminance on the horizontal work plane were monitored from 09:30 to 12:30 on October 29, 2007. Agilent data logger and photometric sensors Li-cor were used. As the results, the topside lighting systems can improve the illumination uniformity than side lighting and top lighting. However, the appropriated shading system should be integrated to prevent the direct sunlight.

• Journal of Multimedia Information System
• /
• v.6 no.4
• /
• pp.329-332
• /
• 2019

Recently, smart lighting systems are the combination between sensors and lights. These systems turn on/off and adjust the brightness of lights based on the motion of object and the brightness of environment. These systems are often applied in places such as buildings, rooms, garages and parking lot. However, these lighting systems are controlled by lighting sensors, motion sensors based on illumination environment and motion detection. In this paper, we propose an automatic lighting control system using one single camera for buildings, rooms and garages. The proposed system is one integration the results of digital image processing as motion detection, hand gesture detection to control and dim the lighting system. The experimental results showed that the proposed system work very well and could consider to apply for automatic lighting spaces.

• The Journal of the Korea Contents Association
• /
• v.10 no.11
• /
• pp.38-47
• /
• 2010

DMX512 protocol controls a lighting system for outdoor lightings and stage lightings. But lighting systems using DMX512 protocol based wired needs expensive cost in installation, maintain, repair. And it has restrictions about control channel numbers and its ranges. Also, it needs additional equipments for the control of lighting systems which installed on wide area. In this paper, we propose wireless control technique and a ZDMX module for lighting systems on wide area based on DMX512 protocol. Our technique solves problems of DMX512 protocol, and it can control lighting systems on wide area effectively. We developments the LED lighting system using ZDMX modules and we have confirmed the suitability of our technique for real environment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.11
• /
• pp.7-13
• /
• 2013

There has been a need for the systematic evaluation of the economic efficiency between conventional fluorescent lamp lighting systems that have been used in tunnels and LED lighting systems. This study has evaluated basic tunnel lighting between the conventional fluorescent lighting systems and the LED lighting system using the evaluation tool of tunnel lighting by Life Cycle Cost (LCC) and using the economic efficiency evaluation method. In addition, the unit discount rate of the LED lighting system and the estimated increase in the price of electricity have made the estimated cost of LCC the same if two luminaires were used in the basic part of the tunnel.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.5
• /
• pp.19-25
• /
• 2015

The management of energy resources for efficient utilization of the energy resources while reducing the system costs is a critical technical issue. Among many kinds of the energy resource management, the energy reduction for indoor lighting systems is getting much concern as a large portion of energy consumption has been made for indoor lightings. In this paper, an energy-efficient lighting control scheme for indoor lighting systems in order to reduce the energy consumption by controlling the luminous flux and the lighting direction under the illuminance constraints is proposed. With the use of the user location information for the luminaire which is closely located to the user, the proposed scheme firstly sets the light direction of the luminaire to be aligned to the user location. Then, an optimization problem to find the luminous flux of each luminaire is formulated in order to minimize the luminous flux sum of the luminaires with the constraints for the dynamic ragne of the luminous flux, and the light flux for each luminaire is determined by the solution of the problem. Simulation results show that the proposed scheme outperforms the luminaire control scheme with only the luminous flux control in the evaluation of satisfaction of the required illuminance level.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.1
• /
• pp.29-38
• /
• 2016

Objective: The purpose of this research is to extract factors affecting office lighting and their relations, and then develop a framework that helps designers research and design smart lighting systems. Background: Due to the highly specialized usages of offices, the lighting system within offices also varies according to space, work, user, etc. A framework which considers these various factors and their relations is necessary for understanding and developing smart lighting systems. Method: First we extract factors affecting office lighting conditions, and select factors that can be controlled. We then analyze and develop a structure which reflects the relations among these factors from procedural perspective. Results: We divide factors affecting office lighting into physical and social factors, and then conceptualize their relations using a circular model. We then develop our framework from procedural perspective by dividing these factors into three levels, namely Subject, Action and Object. Conclusion: The developed framework organizes various factors affecting office lighting and their relations, and helps understand the procedural and structural aspects of lighting system. Application: Our framework helps designing and refining smart lighting system for complicated office spaces by helping people understanding the overall structure of office lighting.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1491-1492
• /
• 2008

This paper investigates life test of LED lighting module using accelerated life test method. Pooly designed LED lighting systems can experience a short life. By knowing the relationship between life and heat, LED system manufacturers can design and build long-lasting systems. In this study, various white LED from several other manufacturer were subjected to life tests at LED lated temperatures for prediction to life of LED lighting systems. Results show that the different LED products have various optical characteristic and different life values.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.9
• /
• pp.984-993
• /
• 2014

In this paper, we propose a design for an efficient hybrid LED street lighting management system using standalone solar photovoltaic. The proposed efficient hybrid LED street lighting management system was composed of hybrid power conditioning system, gateways, LED street lights and a monitoring server. The hybrid power conditioning system was designed to charge produced power by solar photovoltaic panels in day time, and supply power to the LED street lights in night time. If there is insufficient power, the system was designed to operate using firm power, because the system utilizes photovoltaic power. A system control algorithm allied to the lighting management system, and experimented by being configured to the functions that are able to perform real-time monitoring and remote control through the lighting management system even when absent. In the result of the efficiency analysis of the hybrid lighting management system proposed in this paper, we were able to increase the energy efficiency compared to existing lighting control systems by reducing power consumption and electricity costs.