• 한국의류학회지
• /
• 제38권5호
• /
• pp.665-674
• /
• 2014

An analysis of the components of clay mineral before and after coloration (XRF) showed that the elements involved in coloration are Fe, Cr, and Ni. Fe accounts for 65% of coloring components on dyed fabric; in addition, Cr and Ni also affect coloring. The optimal coloration condition was to repeat the process of immersing the cotton fabric in $80^{\circ}C$ slurry of 8g of clay mineral to 1g cotton for 60 minutes, dry it for 24 hours and rinse three times. Especially, as the repetition of coloration increased, the $(K/S)_{440}$ value of sample A increased from 1.0 to 2.5, and sample B increased from 1.0 to 1.6. The effect of the repeated process on coloration was significant; consequently, the rinsing and drying process were important to decrease the coloration level. It also showed excellent results in regard to color fastness to washing, light, rubbing, perspiration, and antibiotic effect.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.35-41
• /
• 2005

Research and development of nano fiber products is very active over the world. Physical characteristics and dyeing properties of nylon 66 nano fiber were investigated in this study. X-ray diffraction, DSC, analysis of amino end group, and water absorption were performed to get information concerning physical properties of nano fiber. Nylon 66 nano fiber was dyed with high molecular mass acid dyes. Effects of dyeing temperature, pH of dyeing solution, and concentration of acid dyes on dyeing properties such as rate of dyeing and the extent of exhaustion, were examined and compared to those of regu­lar fiber. It was found that nano fiber adsorbed acid dyes at lower temperature, got rapidly dyed, and its extents of exhaustion at specific dyeing temperature were higher than regular fiber. It was also observed that nano fiber could adsorb a large amount of acid dye without a significant loss in the extent of exhaustion. Washing fastness of the dyed nano fiber was lower by $1/2\~1$ grade, light fastness by 1 grade than the dyed regular fiber.

• 자연과학논문집
• /
• 제8권1호
• /
• pp.137-143
• /
• 1995

산성땀액에 면100% 내의(상의)를 처리하고 반복세탁.건조를 한후 내의의 물성변화를 연구, 검토하였다. 수축은 초기의 수축이 크게 나타났으며, 15회 반복세탁에 의해서도 강신도의 영향은 거의 없었으며 백색면 내의의 백색도(Hw)는 감소한 반면 색차($\Delta$E)와 황변도(YI)가 크게 증가하며 일광에 큰 영향을 받고 있음을 알았다. 또한 유색면 내의의 경우 세탁에 의해 색차가 크게 증가함을 보여 세탁초기의 탈색현상이 심각한 것으로 나타났다.

• 패션비즈니스
• /
• 제22권1호
• /
• pp.124-134
• /
• 2018

This study examined the dyeing characteristics and spectrum of cotton and silk by using dyeing solution extracted from aronia. The value $L^{\ast}$ which indicates the brightness of cotton regardless of mordant increases with increasing pH from pH 3.5 to pH 10.5. The color difference value(${\Delta}E$) of the cotton was generally high in pH 3.5 regardless of mordant existence. The silk showed the highest ${\Delta}E$ value in pH 3.5 dye solution as cotton did. On the other hand, the silk with mordant dyed showed the highest ${\Delta}E$ value in pH 7. Silk fabrics dyed with Aronia solution turns out red in pH 3.5, blue in pH 7 and yellow in pH 10.5. This is because of the amino acid, one of the silk ingredients, combines with a part of anthocyanin to show blue. As the result of the spectrum measurement, the maximum absorption wavelength of Aronia solution was increased in the order of pH 10.5, pH 3.5 and pH 7, regardless of extraction temperature and mordant. The measurement results of color fastness to washing and color fastness to light are generally low. Therefore, there is a need for further study to improve color fatness in the future.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2010년도 제3회 국제학회
• /
• pp.167-168
• /
• 2010

Non coating type Low melting yarn(L/M PET) not to use the polyurethane resin causing some problems was knitting and evaluated its dyeing characteristics, heat setting properties and flame-retardant properties without flame retardant agent or flame retardant fabric. In order to investigate the dyeing property of fabric of L/M PET, the dyeing of L/M PET was experimented at each different dyeing temperature. Higher exhaustion yield was achieved at lower temperature of L/M PET compared to regular PET. According to result of the study for the heat setting properties of L/M fiber, the K/S value of dyed L/M fiber increased as much as the heat setting temperature did. The experiment for the light fastness reached similar result to dyed PET. However washing fastness in L/M fiber showed lower grade compared with regular PET. flame-retardant efficiency of L/M PET without flame retardant agent or flame retardant fabric measured by $45^{\circ}$ burn test and Contact burn test. The flame?retardant performance of the sample was carried out according to the Korea Fire-fighting Standard.[KOFEIS 1001].

• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.194-205
• /
• 2013

In this study, we report dyeing properties and functionality of cotton and silk fabrics dyed with methanol extract from Juniperus chinensis heartwood. Non-aqueous dye of Juniperus chinensis heartwood extracted with methanol was expressed reddish color. It showed relatively good affinity to silk than cotton. Dye uptake of cotton and silk continued to increase according to the increase of the dye concentration. Cotton was not affected by the dyeing temperature and time, however, dye uptake of silk was increased as the dyeing time and temperature were increased. Dye uptake of cotton and silk were the highest at pH 8 and pH 6 respectively. Dyed fabrics showed various colors depending on mordant types and mordant concentration. Washing, light and perspiration fastness were not good. However, rubbing and dry cleaning fastness showed relatively good grade. Dyed fabrics of ultraviolet-cut ability and deodorant ability were improved. Also, dyed fabrics showed very good antimicrobial abilities of 99.9%.

• 한국염색가공학회지
• /
• 제31권3호
• /
• pp.127-134
• /
• 2019

Cotton fabrics were treated with gelatin to improved their dyeability, color strength toward cochineal dye. Gelatin were used as the protein. Gelatin is containing a large number of hydrophilic groups. Pad-dry-cure method was used for the treatment process(10g/L concentration). The scanning electron micrograph showed the gelatin was deposited on the surface of cotton. Pretreated fabrics were mordanted with 10%(owf) alum. Then the fabrics were dyed with cochineal. Compared with original cotton fabric the K/S value with cochineal dyes was significantly improved on gelatin modified cotton. Treating cotton with 10g/L concentration gelatin offered higher cochineal adsorption. The dyeability of pH 4 yielded the highest color strength. In dyebaths of a ratio of ethanol and water such as; 10:0, 9:1, 8:2, 7:3, 6:4, 5:5, 4:6, 3:7, 2:8, 1:9, 0:10, fabrics were dyed. The ratio of ethanol and water had powerful effects on solution polarity. Cochineal dye uptake showed maximum value, when the proportion of ethanol and water was 9:1. Dyeing at increased temperatures and with increased time resulted in higher dye uptake and reddish-purple color(5RP). The washing fastness was 1-2grade, and the fastness to light was 2-3grade.

• 패션비즈니스
• /
• 제23권4호
• /
• pp.100-111
• /
• 2019

In this study, the dyeing properties and functionalities of Crataegi fructus extract were investigated for the purpose of application to new natural dye resources. The effects of dyeing conditions(concentration of dye, dye bath temperature, dyeing duration and dye bath pH) and mordanting on dye uptake and color changes were also examined. The study also estimated the colorfastness, antibacterial properties, and ultraviolet protection properties of the dyed and mordanted silk fabrics. The dye uptake increased in tandem with the dye concentration and dye bath temperature. The highest K/S values were obtained at the following conditions: a dye concentration of 100%(v/v), a dyeing period of 60 minutes, a dye bath temperature of $90^{\circ}C$, and a dyeing pH of 3. The colorfastness of the material when dry cleaned or rubbed ranged from good to excellent and fastness to light was rated at grade 2-3. The change in the color grade when exposed to washing was not good; however, the stain of washing fastness was good at a range of 4-5. In regards to the functional property aspects, the dyed and mordanted fabrics exhibited excellent results with a 99.9% reduction rate, and excellent ultraviolet protection factors.

• 한국의류산업학회지
• /
• 제15권4호
• /
• pp.606-612
• /
• 2013

This paper investigates the physical properties of organic cotton staple yarns manufactured by ring and siro spinning methods as well as analyzes the physical properties of fabric specimens knitted with staple yarns made by these two methods. The breaking stress and evenness of organic ring staple yarns showed the same level for the Japanese specimens as the control yarns; in addition, the same coefficient for the friction of the manufactured yarns and Japanese specimens was also shown. These results makes it possible to manufacture organic staple ring yarns from organic cotton fibers. The tenacity and breaking strain of siro staple yarns were higher than ring staple yarns. The evenness and friction coefficient of siro staple yarns were lower than the ring staple yarns; in addition, hairiness and the number of siro staple yarns was significantly lower than the ring staple yarns. The dimensional stabilities of knitted fabrics by 20 Ne and 30 Ne siro staple yarns were superior to ring staple yarns. The color fastnesses of washing, perspiration and abrasion of knitted fabrics by two spinning methods showed the same level as the 4.5 grade; however, the light fastness of knitted fabric by siro staple yarns was superior to ring staple yarns. It was shown that the siro spinning method (using eco-friendly organic cotton fibers) was applicable to a high sensible knitted garment that overcame drawbacks of organic fibers related to shrinkable properties after washing and low color fastness to light.

• 한국의류산업학회지
• /
• 제19권3호
• /
• pp.331-336
• /
• 2017

Bacteria exist everywhere and continuously come into contact with daily surroundings and humans. Super bacterium methicillin-resistant Staphylococcus aureus, resistant to methicillin, has recently appeared. The morbidity and rate of death associated with super bacteria infection has increased. This study investigated the antibacterial activity of fabrics naturally dyed with Chamaecyparis obtusa leaves extract against methicillin-resistant Staphylococcus aureus. Fabrics were left for 15 min in a natural dyeing solution prepared by extraction from C. obtusa leaves using 11.3% (o.w.f) with a fixed liquor ratio of 1:22 at $40^{\circ}C$. The dyeing process was conducted using three different mordants; subsequently, the K/S value of the dyed fabrics increased in the order of None < Cu < Fe < Al. The color fastness property of the fabrics to washing, dry-cleaning, and rubbing was found to be excellent and ranked in the 4-5 grade. The color fastness to light of natural dyeing is low in most cases and has the problem that the dye color soon becomes bleached. Yet, in most cases cloth dyed with retinispora leaves, the color fastnezz to light was good with a third to fourth grade. Non-mordant fabrics, aluminum mordants, and copper mordants also showed better antibacterial properties (99.9% reduction) against methicillin-resistant Staphylococcus aureus, compared to the control fabrics. The dyed fabrics showed the same antibacterial activity even after three washes. The results highlight the strong potential of fabrics naturally dyed with C. obtusa-extract as a medicinal material with excellent antibacterial function against methicillin-resistant Staphylococcus aureus.