• 제목/요약/키워드: light wavelength

검색결과 1,424건 처리시간 0.027초

투과체에 적용된 채광방식이 사무소공간의 색도 및 색온도분포에 미치는 영향 분석 (Effect of Glazing Systems on Chromaticity and Color Temperature in the Office Room)

  • 정인영;김정태
    • 조명전기설비학회논문지
    • /
    • 제21권3호
    • /
    • pp.18-26
    • /
    • 2007
  • 투과체는 기본적으로 외부환경과 접촉할 수 있는 친화적이고 생태학적인 기능을 가지고 있으며, 이를 통해 유입되는 빛은 실내공간에 다양한 분위기를 연출할 수 있도록 해준다. 이에 본 연구는 투과체가 적용된 사무소건물을 대상으로 채광유입을 증대시킬 수 있는 채광방식을 설계하여 적용 시 실내의 색도와 색온도에 미치는 영향을 분석하였다. 이를 위하여 1/10축소모형을 제작하였으며, Prometric 1421이라는 측정기기를 이용하여 실험을 수행하였다. 측정결과 투과체가 갖는 파장대별 투과특성이 실내의 색도에 영향을 미치는 것으로 나타났으며, 빛의 유입을 증대시키는 채광방식을 설치할 경우 천정면의 색온도에 많은 영향을 주었으며, $5{\sim}20[%]$정도의 색온도를 증가시키는 것으로 나타났다. 따라서 채광시스템을 설치할 경우 활동적인 분의기의 공간이 연출될 수 있을 것으로 기대된다.

Methylene Blue의 오존(O3) 산화반응에 관한 연구 (A study of Ozone Oxidation of Methylene Blue)

  • 이철규;김문찬
    • 공업화학
    • /
    • 제16권3호
    • /
    • pp.366-371
    • /
    • 2005
  • 본 연구에서는 methylene blue의 오존 산화하는 동안 BOD, COD, TOC, 흡광도 그리고 탈색 비율을 분석하였으며, 오존산화반응은 methylene blue가 충진되어 있는 원형모양의 반응기에서 수행한 결과 다음과 같은 결론을 얻었다. 탈색도는 최대파장(${\lambda}_{max}$, 660 nm)에서 흡광도를 측정하였다. 오존농도는 $50{\pm}10mg/L$를 사용하였으며 40 min 후 거의 오존산화반응이 끝났다. 그 결과로 $30^{\circ}C$에서 오존산화 반응 후 $TOC/TOC_0$ 비율은 83.8%로 나타났고, COD는 초기값보다 44.0% 감소하였다. 그리고 $BOD_5/COD$ 비율은 64.2%에서 90.8%로 오존산화 반응 후 생분해도가 증가하는 것으로 나타났다. 반응속도상수는 $3.30{\times}10^{-2}min^{-1}$로 나타났으며, 활성화 에너지는 $3.01kcal{\cdot}mol^{-1}$로 나타났다.

콘택트렌즈 재료의 합성과 응용에 관한 연구 (Polymerization and Application of Contact Lens Materials)

  • 송경석;이종헌;성아영
    • 한국안광학회지
    • /
    • 제8권2호
    • /
    • pp.129-134
    • /
    • 2003
  • 불포화 비닐 유도체의 다양한 반응성은 자유 라디칼의 사슬 중합반응을 거쳐 유도되어질 수 있으며, 열역학적으로 실행 가능한 고분자 중합을 수행할 수 있는 능력은 주어진 반응조건 항서 반응을 진행시킬 수 있는 적당한 속도에 의존한다. 따라서 반응이 일어날 수 있는 속도조건을 만들기 위해 중합 개시제와 촉진제가 주로 사용되고 있다. 빛의 흡수도는 Methyl Methacrylate(MMA)를 포함한 단지 몇 종류의 불포화 비닐 단량체들만이 가장 편리한 250nm~500nm 파장범위의 빛을 흡수할 수 있다고 알려져 있다. 또한 광학적, 전기적으로 독특한 성질을 가진 polysilanes은 세라믹의 전구물질, UV 광전저항, 광전도체 등으로 널리 사용되어 왔으며, hydrosilation 반응은 실리콘을 포함한 여러 가지 흥미로운 고분자를 만드는데 사용되고 있다 본 연구는 콘텍트렌즈 재료로 사용되는 고분자를 광 화학적 개시제의 작용을 통하여 공중합체와 단일 중합체로 합성하여 그 수율을 분석하였다. 그 결과 이러한 개시제들은 비닐 유도체들의 중하반응에서 경쟁적으로 또는 동시에 사슬 개시와 사슬 전이제로서 작용하고 있음을 보여 주었다.

  • PDF

Influence of silver nanoparticles on the photovoltaic parameters of silicon solar cells

  • Dzhafarov, Tayyar D.;Pashaev, Arif M.;Tagiev, Bahadur G.;Aslanov, Shakir S.;Ragimov, Shirin H.;Aliev, Akper A.
    • Advances in nano research
    • /
    • 제3권3호
    • /
    • pp.133-141
    • /
    • 2015
  • Influence of Ag nanoparticles on optical and photovoltaic properties of, silicon substrates, silicon solar cells and glass have been investigated. Silver nanoparticles have been fabricated by evaporation of thin Ag layers followed by the thermal annealing. The surface plasmon resonance peak was observed in the absorbance spectrum at 470 nm of glass with deposited silver nanoparticles. It is demonstrated that deposition of silver nanoparticles on silicon substrates was accompanied with a significant decrease in reflectance at the wavelength 360-1100 nm and increase of the absorption at wavelengths close to the band gap for Si substrates. We studied influence of Ag nanoparticles on photovoltaic characteristics of silicon solar cells without and with common use antireflection coating (ARC). It is shown that silver nanoparticles deposited onto the front surface of the solar cells without ARC led to increase in the photocurrent density by 39% comparing to cells without Ag nanoparticles. Contrary to this, solar cells with Ag nanoparticles deposited on front surface with ARC discovered decrease in photocurrent density. The improved performance of investigated cells was attributed to Ag-plasmonic excitations that reduce the reflectance from the silicon surface and ultimately leads to the enhanced light absorption in the cell. This study showed possibility of application of Ag nanoparticles for the improvement of the conversion efficiency of waferbased silicon solar cells instead of usual ARC.

Vertical Change in Extinction and Atmospheric Particle Size in the Boundary Layers over Beijing: Balloon-borne Measurement

  • Chen, Bin;Shi, Guang-Yu;Yamada, Maromu;Zhang, Dai-Zhou;Hayashi, Masahiko;Iwasaka, Yasunobu
    • Asian Journal of Atmospheric Environment
    • /
    • 제4권3호
    • /
    • pp.141-149
    • /
    • 2010
  • Aerosol size and number concentration were observed in the atmospheric boundary layer over Beijing (from near the ground to 1,200 m) on March 15 (a clear day) and 16 (a dusty day), 2005. The results were further compared with lidar measurements in order to understand the dependency of extinction on the particle size distribution and their vertical changes. The boundary layer atmosphere was composed of several sub-layers, and a dry air layer appeared between 400 and 1,000 m under the influence of dust event. In this dry air layer, the concentration of the fine-mode particles (diameter smaller than $1.0\;{\mu}m$) was slightly lower than the value on the clear day, while the concentration of coarse-mode particles (diameter larger than $1.0\;{\mu}m$) was remarkably higher than that on the clear day. This situation was attributed to the inflow of an air mass containing large amounts of Asian dust particles and a smaller amount of fine-mode particles. The results strongly suggest that the fine-mode particles affect light extinction even in the dusty atmosphere. However, quantitatively the relation between extinction and particle concentration is not satisfied under the dusty atmospheric conditions since laser beam attenuates in the atmosphere with high concentration of particles. Laser beam attenuation effect becomes larger in the relation between extinction and coarse particle content comparing the relation between extinction and fine particle content. To clarify this problem technically, future in situ measurements such as balloon-borne lidar are suggested. Here extinction was measured at 532 nm wavelength. Measurements of extinction at other wavelengths are desired in the future.

향나무 추출 색소의 특성 및 염색성 (Characteristics and Dyeability of Juniperus Chinensis Extracts)

  • 남기연;이정순
    • 한국생활과학회지
    • /
    • 제21권5호
    • /
    • pp.989-1004
    • /
    • 2012
  • The purpose of this study was to investigate the characteristics of the pigment and the dyeability of juniperus chinensis needles, berry, bark and heartwood extracts using distilled water, methanol, normal butanol and ethyl acetate as a solvent. Ultraviolet-visible absorption spectrum bands of the extracts were measured at around 280nm to 320nm in all the solvent extracts. The maximum absorption wavelength was able to determine tannin. All the solvent extracts except for distilled water extracts were able to confirm the presence of chlorophyll. Infrared absorption spectra (FT-IR) of all parts of the extracts showed broad absorption bands of OH due to phenolic-OH, benzene CH peak of phenol chemical structure, ether-based stretching vibration peak and the peak of flavonoid compounds that appeared in all the solvent extracts. The yield of juniper needles and heartwood in distilled water and methanol extraction were effective. Extraction of berry yields in distilled water was also effective. The yield of ethanol extraction from the bark showed better efficiency. As a result of using distilled water for the dye solution, the color of the fabrics dyed with all extracts of the needles and Y series berries generally showed light Y progression with a strong red tinge. By using a mixture of 20% ethanol and 80% distilled water for the dye solution, the color of the fabrics dyed with needles and berry extracts showed Y series dominantly. The color of the fabrics dyed with Bark and heartwood extracts were dominantly R series.

고 에너지 레이저를 통한 알루미늄-산소 연소현상에 대한 분광분석 (The spectroscopic study of chemical reaction of laser-ablated aluminum-oxygen by high power laser)

  • 김창환;여재익
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.608-611
    • /
    • 2011
  • 이차 추진제로 많이 쓰이는 알루미늄을 고출력 레이저를 이용하여 공기 중의 산소와 반응시켜 발생되는 rich 및 stoichiometric 상태의 알루미늄-산소 연소 현상에 대해 레이저 분광분석법을 이용하여 연구하였다. 7ns의 펄스 주기와 1064nm의 주파수를 가진 Q-switched Nd:YAG 레이저로 40 - 2500mJ의 에너지가 공급되었으며, 플라즈마 빛은 echelle 회절 분광기와 ICCD 카메라로 감지하였다. 레이저 분광분석을 통하여 연료인 알루미늄과 산화제인 산소의 원자 신호를 얻었을 뿐만 아니라, 현상이 일어나는 환경인 플라즈마 온도와 전자밀도가 계산되었다. 특정 전자 밀도비 비교를 통하여, 고출력 레이저를 통해 일어나는 알루미늄과 산소의 연소 및 폭발 현상 변화에 대한 분석이 가능하다는 것에 본 논문의 중요성이 있다.

  • PDF

화염법에 의한 천이금속 첨가 이산화티타늄 나노분말의 제조 (Fabrication of Transition-metal-incorporated TiO2 Nanopowder by Flame Synthesis)

  • 박훈;지현석;이승용;안재평;이덕열;박종구
    • 한국분말재료학회지
    • /
    • 제12권6호
    • /
    • pp.399-405
    • /
    • 2005
  • Nanopowders of titanium dioxide $(TiO_2)$ incorporating the transition metal element(s) were synthesized by flame synthesis method. Single element among Fe(III), Cr(III), and Zn(II) was doped into the interior of $TiO_2$ crystal; bimetal doping of Fe and Zn was also made. The characteristics of transition-metal-doped $TiO_2$ nanopowders in the particle feature, crystallography and electronic structures were determined with various analytical tools. The chemical bond of Fe-O-Zn was confirmed to exist in the bimetal-doped $TiO_2$ nanopowders incorporating Fe-Zn. The transition element incorporated in the $TiO_2$ was attributed to affect both Ti 3d orbital and O 2p orbital by NEXAFS measurement. The bimetal-doped $TiO_2$ nanopowder showed light absorption over more wide wavelength range than the single-doped $TiO_2$ nanopowders.

타원은하 NGC 4649의 종족합성 (STELLAR POPULATION SYNTHESIS OF THE ELLIPTICAL GALAXY NGC 4649)

  • 천문석;김문환;손영종
    • Journal of Astronomy and Space Sciences
    • /
    • 제18권3호
    • /
    • pp.175-190
    • /
    • 2001
  • 적정화 종족합성의 선형화 계획을 통하여 자외선 방출이 강한 타원 은하 NGC 4749의 광도 계급과 분광형에 따른 항성 분포를 알아보았다. 종족합성을 위한 항성군을 만들기 위해 $3160\AA$에서 $10800\AA$까지의 파장영역에서 여러 항성종족에 대한 스펙트럼 자료 (Gunn Sf Stryker 1983)를 사용하였다. NGC 4649의 누적 스펙트럼은 Bertola et al. (1982)의 자료를 이용하였다. 주계열 전향점을 이루는 항성종족에 따른 4개의 모형에 대한 종족합성을 수행한 결과 G8-K0V 관을 전향점 종족으로 하는 모형이 NGC 4649의 누적 스펙트럼과 가장 잘 맞음을 확인하였고, 장파장 영역에서의 홉수선은 초중원소 K 거성에 의해 큰 영향을 받는다는 사실을 확인하였다. 종족합성으로부터 구한 NGC 4649의 질량대 광도비 (M/L~ 20)는 역학적으로 구한 값과 비슷함을 알 수 있었으며, 은하의 중심거리에 대한 항성 종족의 분포 특성이 비슷함을 알 수 있었다.

  • PDF

진공증착 법으로 제작한 $WO_{3}$/CdS 박막의 가시광 광 변색의 에너지 전환 (Visible photochromic energy shift of $WO_{3}$/CdS thin films fabricated by thermal evaporation method)

  • 김근묵;김명욱
    • 반도체디스플레이기술학회지
    • /
    • 제4권1호
    • /
    • pp.29-34
    • /
    • 2005
  • Tungsten oxide($WO_{3}$) is suitable to materials for photochromic window in the visible region. The resistivities of CdS, $WO_{3}$, and $WO_{3}$/CdS films prepared by thermal evaporation method were $4.61\times 10\^{3}$, $7.59\times10^{3}$, and $6.29\times10^{3}$ $\omega$ cm. And x-ray diffraction patterns of CdS, $WO_{3}$/CdS films showed a preferred orientation of hexagonal(002), and the monoclinic(020) structure, respectively. The optical transmission were measured that the cut-on wavelength were 510nm, 380nm for CdS and $WO_{3}$ films respectively, and the transmission spectrum of $WO_{3}$/CdS was shifted into the visible region. Photoluminescence(PL) spectra showed the two peaks at 2.8 eV and 3.2 eV for the as-grown sample($WO_{3}$/CdS ($500{\AA}$), but the other sample($WO_{3}$/CdS ($1000{\AA}$)) had a peak energy value of 2.8 eV. The photochromism of $WO_{3}$/CdS films showed that the excitation of electron-hole pairs and subsequent coloration is shifted into visible-light range. And the spectral behavior of coloration turned out to be proportional to the excited electron-hole pairs creation rate of CdS film. This result is interpreted in terms of charge carrier injection from the CdS-layer into the $WO_{3}$ films. We found a value of about 2.8 eV of $WO_{3}$/CdS film which is somewhat higher than peak energy of 2.54 eV using CBD prepared by Bechinger et. al.

  • PDF