• 보존과학연구
• /
• 통권7호
• /
• pp.246-264
• /
• 1986

Micoromorphological alterations of sea-waterlogged woods by marinemicro-oragnisms were investigated by the light and scanning electron microscopy as a part of serial investigations on the shipwrecked materials which were excavated at the sea shore of Wando-Kun, southern coast of Korea in 1984.Deterioration of sea-waterlogged wood by marine microorganisms were varied with the wood species. The degree of deterioration even in the same wood specieswas different according to the part where it was in mud of sea-water. However, the resistance of Torreya nucifera over the marine organisms was marked. Deterioration in cell wall may be classified into three types; thinning of cell wall, separation of secondary wall from compound middle lamella and tunneling of cell wall. Thinning and separation were frequently observed, while the tunneling was rare. Among the wood cell elements of hardwoods, vessel wall was the least deteriorated. The difference degree of degradation of cell wall constituents and the accumulation of inorganic substances in cell lumen indicate that some factors to be considered for the conservation treatment were discussed. The kinds of marine microorganisms invading and/or inhabiting in wrecked wooden ship were also discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.40-43
• /
• 1997

This paper presents a 3D object recognition method for generation of 3D environmental map or obstacle recognition of mobile robots. An active light source projects a stripe pattern of light onto the object surface, while the camera observes the projected pattern from its offset point. The system consists of a laser unit and a camera on a pan/tilt device. The line segment in 2D camera image implies an object surface plane. The scaling, filtering, edge extraction, object extraction and line thinning are used for the enhancement of the light stripe image. We can get faithful depth informations of the object surface from the line segment interpretation. The performance of the proposed method has demonstrated in detail through the experiments for varies type objects. Experimental results show that the method has a good position accuracy, effectively eliminates optical noises in the image, greatly reduces memory requirement, and also greatly cut down the image processing time for the 3D object recognition compared to the conventional object recognition.

• 한국버섯학회지
• /
• 제21권1호
• /
• pp.22-32
• /
• 2023

간벌률이 산림 내에서 환경 요인과 외생균근성 버섯 발생에 미치는 영향을 알아보기 위해 34%, 45%, 60%의 간벌 처리 후 10년이 지난 소나무림에서 수관 울폐율, 수관 통과우량, 토양 온도, 토양 수분량, 하층 식생의 광반응과 외생균근성 버섯 발생 특징을 조사하였다. 수관 울폐율은 4월에 34% 처리구와 대조구가 80~85%로 유의적으로 높았고 11월에는 모든 간벌 처리구들이 대조구에 비하여 5~10%가량 낮아졌다. 60% 처리구의 수관통과우량은 대조구에 비하여 총 200 mm이상 많았으며 월별 수관통과 우량은 10월에 100 mm 이상 큰 차이가 나타났다. 각 처리구의 토양 온도는 60% 처리가 45% 처리에 비하여 0.3~0.5℃ 정도 높아 큰 차이는 없었으나 대조구와는 1℃이상 유의적으로 높아졌다. 간벌 처리구에서 강우 시 토양 수분량이 5% 이상 더 증가하며 34% 처리구에서는 수분 감소 속도도 느려졌다. 소나무를 제외한 주요 수종의 광합성량은 신갈나무가 7 µmolCO₂·m^-2·s^-1로 가장 많았다. 800 µmol·m^-2·s^-1의 동일한 광도에서 신갈나무는 45% 처리구에서 6±0.3 µmolCO₂·m^-2·s^-1로 가장 높은 광합성 수준을 보여주었으며 때죽나무와 쇠물푸레는 간벌률이 높을수록 광합성량이 증가하였다. 균근성 버섯의 SWI에서 종수는 각 처리구간에는 큰 차이가 나타나지 않았으나 버섯의 발생량은 34%와 45% 처리구가 대조구에 비하여 약 360~840 g 더 많이 발생하였고 60% 처리구에서는 대조구에 비하여 860 g 더 적은 양이 발생하였다. 특정 종에 따라 애광대버섯은 대조구가 간벌 처리구에 비하여 더 많은 개체수가 발생하였으나 황소비단그물버섯은 34% 간벌 처리구가 대조구에 비하여 10배 이상 증가하였다. 이상의 결과를 통하여 소나무림에서 간벌률에 따른 수관 울폐율의 감소는 산림 내에 광량과 수관통과우량을 증가시키며 토양 온도 상승 및 토양 수분량의 증가와 하층 식생의 광합성량을 증가시켜 특정 버섯의 발생량 변화에 영향을 주는 것으로 추정된다. 그러나 산림생태계의 복잡성을 고려할 때 간벌과 버섯 발생에 대한 정확한 상관관계를 알기 위해서는 장기간의 연구가 지속되어야 할 것으로 생각된다.

• 원예과학기술지
• /
• 제32권4호
• /
• pp.454-462
• /
• 2014

'홍로'/M.9 사과나무 세장방추형의 생산성을 높이기 위하여 수고에 따른 투광율, 투약율, 수체생육, 과실 품질, 그리고 노동 생산성을 비교 분석하였다. 수고가 높을수록 수관내부, 특히 낮은 수관위치에서의 투광률은 감소하였다. 엽면적지수(LAI)는 수고가 높을수록 증가하였으나 엽면적지수의 증가는 수관 내부 농약 살포 효과를 감소시켰다. 신초 생장은 수고가 높을 때 가늘고 길게 자라는 경향이었고, 과실의 착색도는 수고가 높을 때 감소하였으나, 과실 경도와 산함량은 차이가 없었다. 수고가 높을 때 주당 착과수는 증가하였으나, 305g 이상의 대과 생산량은 감소하였다. 수고가 높아질수록 적화, 적과, 전정, 수확 등에 필요한 노동력은 증가하였으나, 높은 수고에서의 노동력 증가는 고소작업차를 투입하여 해결할 수 있었다. 4.5m 수고에서 적화 작업의 경우 사다리보다 전동고소작업차를 이용했을 때 작업시간은 14.6분/주가 절약되었다. 투광율 향상과 과실착색도 증진을 위하여 수관내부의 광환경 개선이 필요함을 알 수 있다.

• 한국자원식물학회지
• /
• 제32권6호
• /
• pp.677-682
• /
• 2019

Hand leaf thinning for improvement of fruit coloration and quality is one of the most labor-consuming works in Korean apple cultivation. The study was aimed at investigating whether foliar application of two chelate compounds (Cu-EDTA, Fe-EDTA) could defoliate effectively 'Hongro'/M.9 apple leaves and enhance fruit coloration and quality. At 30 days before harvest, foliar spray with two chelate compounds defoliated significantly the apple leaves. Chelate treatments did not affect the leaf chlorophyll content. High concentration of chelates decreased drastically photosynthetic rate of true leaves, and then it stayed in low levels, whereas low levels of chelates reduced sharply the photosynthetic rate but it was gradually restored over time. Cu-EDTA regardless of its concentration triggered higher defoliation compared to Fe-EDTA. Consequently, higher defoliation improved light interception of fruits and accumulated more anthocyanin. Particularly, Cu-EDTA could target mainly fruit cluster leaves which affect directly light interception of the fruits, i.e. more selective defoliants compared to Fe-EDTA. However, 3% Cu-EDTA rather defoliated excessively, accompanying with reduction of fruit weight and soluble solids. Therefore, our results suggest that 1% Cu-EDTA which defoliates properly the fruit cluster leaves could improve coloration and quality of 'Hongro'/M.9 apple fruits.

• Journal of Welding and Joining
• /
• 제17권2호
• /
• pp.53-60
• /
• 1999

Conventionally, CCD camera and vision sensor using the projected pattern of light is generally used to inspect the weld bead defects. But with this method, a lot of time is needed for image preprocessing, stripe extraction and thinning, etc. In this study, laser vision sensor using the scanning beam of light is used to shorten the time required for image preprocessing. The software for deciding whether the weld bead is in proper shape or not in real time is developed. The criteria are based upon the classification of imperfections in metallic fusion welds(ISO 6520) and limits for imperfections(ISO 5817).

• 치과방사선
• /
• 제22권2호
• /
• pp.241-252
• /
• 1992

The purpose of this study was to investigate the changes of morphology and structure of bone tissue in the irradiated mandibular bone in rats which were fed a low calcium diet. In order to carry out this experimant, 64 seven-week old Sprague-Dawley strain rats weighing about 150gms were selected and equally divided into one experimental group of 32 rats and one control group with the remainder. The experimental group and the control group were then subdivided into two groups when the rats reached ten-week old, 16 were assigned rats for each subdivided group, exposed to irradiation. The two irradiation groups received a single dose of 20 Gy in the jaws area only and irradiated with a cobalt-60 teletherapy unit. The rats in the control and experimental groups were serially terminated by fours on the 3rd, the 7th, the 14th, and the 21st day after irradiation. Following termination, both sides of the dead rats mandibular bodies were removed and fixed with 10% neutral formalin. One side of the mandibular body was radiographed with a soft X-ray apparatus. Thereafter, the obtained microradiographs were observed by a light microscope. The remaining side of the mandibular bone was further decalcified and embedded in paraffin as using the general method. The specimen sectioned and stained with hematoxylin and eosin, and Rabit Anti-Human Tumor Necrosis Factor-a, observed by a light microscope. The obtained results were as follows: 1. Microradiogram revealed that thinning of the cortex and a decrease in the trabecula of the interradicular bone and mandibular body were observed and noted from the start to finish throughout the experiment in the non-irradiated rats on the low calcium diet rather than in the non-irradiated rats on the normal diet. In microscopic observations, there were marked osteolytic changes in the center of the bone marrow. 2. Microradiogram revealed that thinning of the cortex and a decrease in the trabecula of interradicular bone and mandibular body were more marked after 7 days in the irradiated rats on the low calcium diet rather than in the non-irradiated rats on the low clacium diet. In microscopic observations, osteoblasts were decreased markedly after 7 days, and a few osteoclasts were observed. 3. Microradiogram revealed that thinning of the cortex and a decrease in trabecula of interradicular bone and the mandibular body were more marked from the strart to finish troughout the experiment in the irradiated rats on the low calcium diet rather than in the irradiated rats on the normal diet. In microscopic observations, there were no osteolytic changes noted in the irradiated rats on the normal diet. 4. In immunocytochemical findings, a few bone marrow cells including Tumor Necrosis Factor were observed in the irradiated rats on the normal diet, but was not observed in the rats on the low calcium diet.

• 한국산림과학회지
• /
• 제85권3호
• /
• pp.524-531
• /
• 1996

소나무의 초기 천연 갱신에 영향을 미치는 중요한 인자가 무엇인지를 알아보기 위하여 강원도 평창군 중왕산 지역에서 이 연구를 수행하였다. 3개의 조사지와 1개의 임도 지역에 시험구를 설치하여 소나무의 발아와 치수의 묘고, 여름을 지나는 동안의 생존율을 조사하였다. 조사지 I과 III은 1992년에 간벌을 실시한 곳이고, 조사지 II는 1982년과 1989년에 모수림 작업을 시도한 후, 1993년까지 헥사지 논으로 지피 식생 처리를 한 곳이다. 세 조사지는 서로 다른 시기에 산림 작업의 형태로 교란이 일어난 곳이다. 소나무 치수는 간벌이 일어난 후에 나타났으며, 치수의 발생은 지피 식생이 적은 곳에서 잘 나타났다. 특히 산림 작업에 의해 토양이 드러난 곳인 작업로에 소나무 치수의 발생이 많았으며, 상층 수관의 울폐도가 낮은 곳에서 생장이 좋았다. 하층 식생은 소나무 치수의 발생과 생장에 제한요소로 작용하나 약 10~40%의 초본류는 소나무 치수를 보호하기 위하여 필요하다. 여름철의 집중호우는 주위에 초본이 없는 경우 완전히 뿌리를 내리지 못한 소나무 치수를 비에 떠내려가게 하는 역할을 하였다. 소나무 치수가 잘 성장하기 위해서는 묘고가 초본류의 높이인 약 50cm에 달하는 4~5년까지 제초 작업이 필요하다. 이 지역에서 소나무 천연 갱신에 주요한 영향을 미치는 요인 등 갱신을 도와주는 요인은 간벌과 집재 등의 산림 작업과 40% 이상의 광이었으며, 피도 70% 이상의 지피식생과 집중 호우 등은 오히려 소나무 묘목의 생존과 생장에 방해가 되었다.

• 한국지역사회생활과학회지
• /
• 제18권2호
• /
• pp.247-263
• /
• 2007

This study was complied to analyze the professional agricultural techniques level and to suggest a desirable direction for the professional education system for women farmer. The research was conducted by using in-field surveys and interviews. Data was gathered by questionnaire from 147 women farmer in five specialized crop regions: strawberry, cucumber, rose, apple, and oyster mushroom. The results obtained are as follows. First, the technique levels in computer usage and electronic commerce, machinery usage, pesticide and fertilizer utilization, facility automation, and eco-agricultural cultivation were low. Second, the demand for professional education, evaluated through technique level by standard management diagnosis, was recognized. Areas of concern included: cucumber (temperature control, carbonic acid gas control, grading, funds management), strawberry (light control, soil temperature control, irrigation watering, shipping), rose (temperature control, light control, funds management, cooperated management), oyster mushroom (growth cabinet sterilizer), and apple (flower bud pinching, defloration, fruit thinning, funds management). Based on the results of this study, the following are suggestions for the planning of a professional education system for women farmer. First, it needs to address formal education in marketing, machinery usage, facilities automation, and techniques in pesticide and fertilizer utilization. Second, it needs to be a multi- level program with appropriate terminology at every level which is suitable to each age and ability of women farmer. Third, it needs a more comprehensive manual developed by need analysis of women farmer and a larger lecturer pool for professional education.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.82-90
• /
• 2005

Recently, the in-line vision inspection has become the subject of growing research area in the visual control systems and robotic intelligent fields that are required exact three-dimensional pose. The objective of this article is to study the pc based in line visual inspection with the hand-eye structure. This paper suggests three dimensional structured light measuring principle and design method of laser sensor header. The hand-eye laser sensor have been studied for a long time. However, it is very difficult to perform kinematical analysis between laser sensor and robot because the complicated mathematical process are needed for the real environments. In this problem, this paper will propose auto-calibration concept. The detail process of this methodology will be described. A new thinning algorithm and constrained hough transform method is also explained in this paper. Consequently, the developed in-line inspection module demonstrate the successful operation with hole, gap, width or V edge.