• Journal of the Korean Applied Science and Technology
• /
• v.26 no.2
• /
• pp.171-178
• /
• 2009

A comparative analysis of the hindered amine light stabilizers (HALS) and UV abosrber (UVA) and their respective photostabilizing effect on wood plastic composites (WPCs) are reported in this study. The influence of accelerated weathering on the mechanical properties of the composites and the microscopic morphology of a degraded layer on the cross section and the surface were studied. UV absorbers were more efficient at preventing composite lightening than was UV stabilizer. The amount of whitening decreased with the increase of photostabilizers. With the addition of a UV absorber (Tinuvin360), the tensile modulus and strength of the composites increased slightly. However, the addition of a light stabilizer (Tinuvin770) and a UV absorber decreased the tensile modulus and strength of the composites. After 250 and 500 hr exposure, tensile modulus and strength of the un stabilized and stabilized composites decreased. The tensile strength of UV absorber (Chimassorb81)-stabilized composites was significantly greater than that of control and light stabilizer (Tinuvin770)- and UV absorber (Tinuvin360)-stabilized composites. UV absorber-stabilized samples showed less whitening and photodegradation than control and light stabilizer-stabilized samples.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.173-177
• /
• 2021

In this study, the torsional rigidity and durability of the stabilizer models with the hollow axis of light and large sized cars were compared and investigated each other. Model 1 was applied with the moment more than three times as much as model 2, but the maximum deformation of model 1 was seen to be about 2.6 times larger than that of model 2. Commonly, models 1 and 2 are seen to get the most stress at the neck of stabilizer bar link. Also, the maximum stress of model 1 was about 2.9 times larger than that of model 2. Model 1 at large car showed more than 20 times more deformed energy than model 2 at small car. Overall, it could be examined that the deformation energy of the bracket part on the side where the moment fixing the stabilizer bar was applied was greater than that of the stabilizer. It is thought that the analysis results in this study can be helped at the design of its convergent research as a durable component of the stabilizer at a light or large sized car.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.704-711
• /
• 1999

This paper presents a design of fuzzy power system stabilizer (FPSS) using adaptive evolutionary computation (AEC). We have proposed an adaptive evolutionary algorithm which uses a genetic algorithm (GA) and an evolution strategy (ES) in an adaptive manner in order to take merits of two different evolutionary computations. FPSS shows better control performances than conventional power system stabilizer (CPSS) in three-phase fault with heavy load which is used when tuning FPSS. To show the robustness of the proposed FPSS, it is appliedto damp the low frequency oscillations caused by disturbances such as three-phase fault with normal and light load, the angle deviation of generator with normal and light load and the angle deviation of generator with heavy load. Proposed FPSS shows better robustness than CPSS.

• Journal of the Korean Professional Engineers Association
• /
• v.9 no.1
• /
• pp.35-39
• /
• 1976

Possible methods of protection of non cellulosic fibers, particularly nylon filament yarn, from the damaging effects of light are discussed. Manganese acetate, cupricacetate, G1-06-196 and sodium phosphate are used as a light stabilizer for nylon filament yarn. The light stability of filament containing different weight of TiO$_2$ is increased as the following order: Bright>Semi-Dull>Full-Dull The protection effect against light according to the present of the light stabilizer in filament increased in the following order: Manganese acetate> Cupric acid> G1-06-196> Sodium phosphate Manganese acetate is shown to be the most effecting salt for protecting nylon against light. 15 ppm of the salt is shown to be effective enough for protecting nylon filament yarn against light.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.137-146
• /
• 2001

According to the advanced development of Light Weight Torpedo, the overall items related with the parachute type and gore layout and air stabilizer of the parachute for fixed and rotary wing aircraft are described in this paper. Also, the drag-area which should satisfy the firing envelope, parachute inflation characteristics, stability of parachute and torpedo in airdropping, water entry impact on torpedo and parachute constituted the principle design factors. The important trial and errors occurred in the step of performance of the parachute for fixed and rotary wing aircraft are investigated and analyzed.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.413-419
• /
• 2009

As the refractive index of the prism layer becomes higher, the optical performance of the prism sheet gets better and the efficiency of the LCD backlight unit is improved. In order to increase the refractive index of the prism layer, the ultraviolet curing type resins were prepared by mixing high refractive index materials containing aromatic groups and the multi-functional reactive diluents. By using 9,9-bis [4-(2-acryloyloxyethoxy)phenyl] fluorene, the refractive index of the prism layer was increased up to 1.58 and the brightness of the backlight unit was improved. Since the light source used in the backlight unit caused the yellowing in the prism sheet and deteriorated the brightness accordingly, the hindered amine light stabilizer was used to improve the yellowing resistance successfully.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.293-300
• /
• 1999

Soilcrete has been the traditional material for the paving and soft ground improvement techniques. But because the durability is not excellent and the quality is not homogeneous, it has not been used for the various purposes up to date. And because the quality of soilcrete is apt to be changed by the content of water and soil stabilizer, and the kind of soil and soil stabilizer, it is not free of cares. But with the increase of naturally oriented needs for the light traffic road such as pedestrian roads of the garden, golf courses and sidewalks, the cases of soilcrete paving has been increased recently. This study aims at making the reference table of the mix design in accordance with the required design specifications for the soilcrete admixtures by the FGC soil stabilizer by using the statistical experiment method. The treated soil is the clay which are widely spreaded in Korea. As the results of this study we can derive the effective reference mix design table for the clay soil treated by the FGC soil stabilizer in accordance with the compressive strength of 50∼200kg/$\textrm{cm}^2$ soilcrete with respect to the contents of water, soil stabilizer and fine sand.

• Journal of the Korean GEO-environmental Society
• /
• v.1 no.1
• /
• pp.43-50
• /
• 2000

This paper presents the engineering property of light weight soil made of soil mixed with recycled stylofoam and stabilizer. Recycled stylofoam beads is able to use by lightweight fill materials because it is light, adiabatic, and effective for vibration interception. Especially, recycled stylofoam beads is easy to supply because stylofoam have been recycle item in 1996. In this study, physical and geotechnical properties of the light weight mixed soil(weathered granite soil mixed with Stylofoam Beads) were analyzed by laboratory experiments to examine its suitability for backfill materials. Laboratory tests were performed to evaluated strength, bearing capacity, weight, permeability, microphotograph analysis with variation of mixing ratio. Based on the results, it is concluded that the use of recycled stylofoam beads is acceptable lightweight fill.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.2
• /
• pp.61-70
• /
• 2002

This paper presents the engineering property of light weight soil made of soil mixed with recycled Styrofoam and stabilizer. Recycled Styrofoam is widely used for lightweight fill material because it has important geotechnical characteristics which are light, adiabatic, and effective for vibration interception. It is very easy to get the disposal styrofoam. For this study, dynamic compaction test, static compaction test and pH and leaching tests were performed. Based on the test results, it is concluded that the static compaction method is recommened to prevent from crushing materials and pH values of embankment materials are satisfied with these of domestic and RCRA configuration.

• Journal of Powder Materials
• /
• v.27 no.3
• /
• pp.233-240
• /
• 2020

Nano-sized ZnSe particles are successfully synthesized in an aqueous solution at room temperature using sodium borohydride (NaBH₄) and thioglycolic acid (TGA) as the reducing agent and stabilizer, respectively. The effects of the mass ratio of the reducing agent to Se, stabilizer concentration, and stirring time on the synthesis of the ZnSe nanoparticles are evaluated. The light absorption/emission properties of the synthesized nanoparticles are characterized using ultraviolet-visible (UV-vis) spectroscopy, photoluminescence (PL) spectroscopy, and particle size analyzer (PSA) techniques. At least one mass ratio (NaBH4/Se) of the reducing agent should be added to produce ZnSe nanoparticles finer than 10 nm and to absorb UV-vis light shorter than the ZnSe bulk absorption wavelength of 460 nm. As the ratio of the reducing agent increases, the absorption wavelengths in the UV-vis curves are blue-shifted. Stirring in the atmosphere acts as a deterrent to the reduction reaction and formation of nanoparticles, but if not stirred in the atmosphere, the result is on par with synthesis in a nitrogen atmosphere. The stabilizer, TGA, has an impact on the Zn precursor synthesis. The fabricated nanoparticles exhibit excellent photo-absorption/discharge characteristics, suggesting that ZnSe nanoparticles can be alloyed without the need for organic solutions or high-temperature environments.