• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.171-178
• /
• 2009

A comparative analysis of the hindered amine light stabilizers (HALS) and UV abosrber (UVA) and their respective photostabilizing effect on wood plastic composites (WPCs) are reported in this study. The influence of accelerated weathering on the mechanical properties of the composites and the microscopic morphology of a degraded layer on the cross section and the surface were studied. UV absorbers were more efficient at preventing composite lightening than was UV stabilizer. The amount of whitening decreased with the increase of photostabilizers. With the addition of a UV absorber (Tinuvin360), the tensile modulus and strength of the composites increased slightly. However, the addition of a light stabilizer (Tinuvin770) and a UV absorber decreased the tensile modulus and strength of the composites. After 250 and 500 hr exposure, tensile modulus and strength of the un stabilized and stabilized composites decreased. The tensile strength of UV absorber (Chimassorb81)-stabilized composites was significantly greater than that of control and light stabilizer (Tinuvin770)- and UV absorber (Tinuvin360)-stabilized composites. UV absorber-stabilized samples showed less whitening and photodegradation than control and light stabilizer-stabilized samples.

• 한국융합학회논문지
• /
• 제12권2호
• /
• pp.173-177
• /
• 2021

본 연구에서는 경차와 대형차의 중공축을 가진 스테빌라이저 모델들의 비틀림 강성과 내구성을 해석하여 서로 비교 및 검토하였다. Model 1이 가해진 모우멘트가 Model 2에 비하여 3배 이상이었지만 최대변형량은 2.6배 정도로 크게 나타났다. Model 1, Model 2 공히, 스테빌라이저 바 링크 목 부분에서 가장 많은 응력을 받는 것으로 보인다. 또한 Model 1의 최대응력은 Model 2보다 2.9배 정도로 크게 나타났다. 대형차에서의 Model 1이 소형차에서의 Model 2 보다 약 20배 이상의 변형 에너지를 보였다. 전반적으로 스테빌라이저의 변형 에너지보다 스테빌라이저 바를 고정해주는 모멘트를 가한 쪽의 브라켓 부분의 값이 큰 것을 확인할 수 있었다. 그리고 본 연구에서의 해석 결과들은 경차나 대형차에서의 스테빌라이저의 내구성이 있는 부품으로서 그 융합연구 설계에 도움이 될 수 있다고 사료된다.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권6호
• /
• pp.704-711
• /
• 1999

This paper presents a design of fuzzy power system stabilizer (FPSS) using adaptive evolutionary computation (AEC). We have proposed an adaptive evolutionary algorithm which uses a genetic algorithm (GA) and an evolution strategy (ES) in an adaptive manner in order to take merits of two different evolutionary computations. FPSS shows better control performances than conventional power system stabilizer (CPSS) in three-phase fault with heavy load which is used when tuning FPSS. To show the robustness of the proposed FPSS, it is appliedto damp the low frequency oscillations caused by disturbances such as three-phase fault with normal and light load, the angle deviation of generator with normal and light load and the angle deviation of generator with heavy load. Proposed FPSS shows better robustness than CPSS.

• 기술사
• /
• 제9권1호
• /
• pp.35-39
• /
• 1976

Possible methods of protection of non cellulosic fibers, particularly nylon filament yarn, from the damaging effects of light are discussed. Manganese acetate, cupricacetate, G1-06-196 and sodium phosphate are used as a light stabilizer for nylon filament yarn. The light stability of filament containing different weight of TiO$_2$ is increased as the following order: Bright>Semi-Dull>Full-Dull The protection effect against light according to the present of the light stabilizer in filament increased in the following order: Manganese acetate> Cupric acid> G1-06-196> Sodium phosphate Manganese acetate is shown to be the most effecting salt for protecting nylon against light. 15 ppm of the salt is shown to be effective enough for protecting nylon filament yarn against light.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.137-146
• /
• 2001

According to the advanced development of Light Weight Torpedo, the overall items related with the parachute type and gore layout and air stabilizer of the parachute for fixed and rotary wing aircraft are described in this paper. Also, the drag-area which should satisfy the firing envelope, parachute inflation characteristics, stability of parachute and torpedo in airdropping, water entry impact on torpedo and parachute constituted the principle design factors. The important trial and errors occurred in the step of performance of the parachute for fixed and rotary wing aircraft are investigated and analyzed.

• 폴리머
• /
• 제33권5호
• /
• pp.413-419
• /
• 2009

프리즘 시트의 프리즘 층 물질의 굴절률을 증가시킬수록 휘도가 향상되어 LCD 백라이트 유닛의 효율이 향상되었다. 프리즘 층의 굴절률을 증가시키기 위해서 방향족을 포함하고 있는 고굴절 물질과 다관능성 반응물을 혼합하여 자외선 경화형 수지를 제조하였다. 9,9-Bis [4-(2-acryloyloxyethoxy)phenyl] fluorene을 반응시켜 프리즘층의 도막 굴절률을 1.58까지 증가시켰고 백라이트의 휘도를 향상시킬 수 있었다. 백라이트 유닛에 사용되는 광원에 장기간 노출될 경우 프리즘 시트에 황변현상이 발생하게 되어 휘도가 감소되므로 자외선 안정제로 hindered amine light stabilizer를 사용하여 프리즘 시트의 내황변성을 크게 향상시켰다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.293-300
• /
• 1999

Soilcrete has been the traditional material for the paving and soft ground improvement techniques. But because the durability is not excellent and the quality is not homogeneous, it has not been used for the various purposes up to date. And because the quality of soilcrete is apt to be changed by the content of water and soil stabilizer, and the kind of soil and soil stabilizer, it is not free of cares. But with the increase of naturally oriented needs for the light traffic road such as pedestrian roads of the garden, golf courses and sidewalks, the cases of soilcrete paving has been increased recently. This study aims at making the reference table of the mix design in accordance with the required design specifications for the soilcrete admixtures by the FGC soil stabilizer by using the statistical experiment method. The treated soil is the clay which are widely spreaded in Korea. As the results of this study we can derive the effective reference mix design table for the clay soil treated by the FGC soil stabilizer in accordance with the compressive strength of 50∼200kg/$\textrm{cm}^2$ soilcrete with respect to the contents of water, soil stabilizer and fine sand.

• 한국지반환경공학회 논문집
• /
• 제1권1호
• /
• pp.43-50
• /
• 2000

본 논문은 폐스티로폴과 현장발생토를 활용하여 경량성토재로서의 특성을 파악하고자 하는데 목적이 있다. 폐스티로폴 입자는 가볍고 단열성이 좋으며 진동차단효과도 우수하기 때문에 경량성토재로서의 활용이 가능하다. 특히 스티로폴은 1996년 재활용품목으로 선정되어 토공재료로서의 적합성만 확인된다면 체계적인 공급이 가능하다. 따라서 본 논문에서는 폐스티로폴 입자와 현장발생토를 혼합한 후 혼합비와 고화재의 투입량을 변화시켜가며 다짐시험, 일축압축시험, 정수위 투수시험, CBR 시험, 실체현미경분석을 실시하였으며, 그 결과 폐스티로폴을 활용한 혼합토가 강도, 투수, 지지력 특성이 우수한 것으로 나타나 토공재료고서 사용가능한 것으로 나타났다.

• 한국지반환경공학회 논문집
• /
• 제3권2호
• /
• pp.61-70
• /
• 2002

본 논문은 폐 Styrofoam과 현장발생토를 활용하여 경량 성토재로서의 특성을 파악하고자 하는데 목적이 있다. 폐 Styrofoam 입자는 가볍고 단열성이 좋으며 진동차단효과도 우수하기 때문에 경량 성토재로서의 활용이 가능하다. 특히 Styrofoam은 1996년 재활용 품목으로 선정되어 토공재료로서의 적합성만 확인된다면 체계적인 공급이 가능하다. 따라서 본 논문에서는 폐 Styrofoam 혼합토의 동적 다짐시험, 정적 다짐시험, pH 및 용출실험을 하였으며, 그 결과 효율적인 다짐관리를 위해서는 정적 다짐방식으로 다짐관리가 이루어져야 하며, 경량 성토재의 환경적 위해성 평가결과 pH는 지정폐기물 판정기준을 만족하는 것으로 나타났다.

• 한국분말재료학회지
• /
• 제27권3호
• /
• pp.233-240
• /
• 2020

Nano-sized ZnSe particles are successfully synthesized in an aqueous solution at room temperature using sodium borohydride (NaBH₄) and thioglycolic acid (TGA) as the reducing agent and stabilizer, respectively. The effects of the mass ratio of the reducing agent to Se, stabilizer concentration, and stirring time on the synthesis of the ZnSe nanoparticles are evaluated. The light absorption/emission properties of the synthesized nanoparticles are characterized using ultraviolet-visible (UV-vis) spectroscopy, photoluminescence (PL) spectroscopy, and particle size analyzer (PSA) techniques. At least one mass ratio (NaBH4/Se) of the reducing agent should be added to produce ZnSe nanoparticles finer than 10 nm and to absorb UV-vis light shorter than the ZnSe bulk absorption wavelength of 460 nm. As the ratio of the reducing agent increases, the absorption wavelengths in the UV-vis curves are blue-shifted. Stirring in the atmosphere acts as a deterrent to the reduction reaction and formation of nanoparticles, but if not stirred in the atmosphere, the result is on par with synthesis in a nitrogen atmosphere. The stabilizer, TGA, has an impact on the Zn precursor synthesis. The fabricated nanoparticles exhibit excellent photo-absorption/discharge characteristics, suggesting that ZnSe nanoparticles can be alloyed without the need for organic solutions or high-temperature environments.