• Korean Journal of Materials Research
• /
• v.22 no.10
• /
• pp.519-525
• /
• 2012

Enhancement of light trapping in solar cells is becoming increasingly urgent for the development of next generation thin film solar cells. One of the possible candidates for increasing light trapping in thin film solar cells that has emerged recently is the use of scattering from metallic nanostructures. In this study, we have investigated the effects of the geometric parameters of Ag nanorings on the light scattering efficiency by using three dimensional Finite Different Time Domain (FDTD) calculations. We have found that the forward scattering of incident radiation from Ag nanorings strongly depends on the geometric parameters of the nanostructures such as diameter, height, etc. The forward scattering to substrate direction is increased as the outer diameter and height of the nanorings decrease. In particular, for nanorings larger than 200 nm, the inner diameter of Ag nanorings should be optimized to enhance the forward scattering efficiency. Light absorption and scattering efficiency calculations for the various nanoring arrays revealed that the periodicity of nanorings arrays also plays an important role in the absorption and the scattering efficiency enhancement. Light scattering efficiency calculations for nanoring arrays also revealed that enhancement of scattering efficiency could be utilized to enhance the light absorption through the forward scattering mechanism.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.2
• /
• pp.267-280
• /
• 1992

This paper describes a numerical analysis of the light scattering patterns of roughness profiles. This analysis was based upon the light scattering theory developed by Beckmann. In the analysis, the roughness profile was regarded as a profile whose irregularities depend on the production process and the shape of cutting tool. Generally, waviness of an actual surface seriously distorts the scattered pattern of roughness profile. In order to avoid the effects of waviness of actual surfaces, several theoretically calculated scattering patterns, instead of actual scattering patterns, were used to analyze the scattering patterns of typical engineering roughness profiles. The characteristics of the light scattering patterns for five model surfaces were studied.

• Particle and aerosol research
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2015

In this study, indoor $PM_{10}$ concentration was measured by different type of real-time instruments in public transport vehicles. Light-scattering method is widely used in measuring the size of particulate matters and there is two types of light-scattering methods; one is the nephelometer type which measures the light-scattering degree by aerosol cloud, the other is the spectrometer type which measures light-scattering degree by individual particle. We observed the variation of $PM_{10}$ in KTX, subway and express bus carriages by 1-minute resolution and found that there is similar tendency in pattern among 4 light-scattering devices but difference in absolute concentrations. By comparing gravimetric result in a subway cabin, the spectrometer type device, C, was chosen as a reference device. The conversion factors of nephelometer device A-1, A-2, and B were 1.666, 1.463 and 2.125 respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.128-130
• /
• 2008

One of methods to increase the efficiency of a dye-sensitized solar cell(DSC) is the effective usage of the incident light. It can be controlled by using a light scattering layer. The light scattering effect makes that the optical path length of incident light to DSC increases. And then, the photocurrent and the efficiency is increased because of the increase of dye adsorption and the abundant amount of the light. In this study, we apply the light scattering layer to DSC by using two $TiO_2$ pastes that have different particle sizes. As a result, the photocurrent increases and the total efficiency is also increases in the case of using large-sized $TiO_2$ particle as the light scattering layer.

• Journal of Powder Materials
• /
• v.16 no.5
• /
• pp.305-309
• /
• 2009

The effect of light scattering layers (400 nm, TiO$_2$ particle) of 4 $\mu$m thickness on the dye-sensitized solar cell has been investigated with a 12 $\mu$m thickness of photo-anode (20 nm, TiO$_2$ particle). Two different structures of scattering layers (separated and back) were applied to investigate the light transmitting behaviors and solar cell properties. The light transmittance and cell efficiency significantly improved with inserting scattering layers. The back scattering layer structure had more effective transmitting behavior, but separated scattering layer (center: 2 $\mu$m, back: 2 $\mu$m) structure (9.83% of efficiency) showing higher efficiency (0.6%), short circuit current density (0.26 mA/cm$^2$) and fill factor (0.02). The inserting separating two scattering layers improved the light harvesting, and relatively thin back scattering layer (2 $\mu$m of thickness) minimized interruption of ion diffusion in liquid electrolyte.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.5
• /
• pp.451-460
• /
• 2013

In a direct coal fuel cell (DCFC) system, it is essential to identify volume fraction of coal suspended in electrolyte melt in order to control its dispersion and fluidity. This requirement is compelling especially at anode channel where hot slurry is likely to flow at low velocity. In this study, light scattering techniques were employed to measure the volume fraction for a pulverized coal suspension with relatively high absorption coefficient. The particle size, scattering angle, and volume fraction were varied to evaluate their effects on the scattering behavior as well as scattering regime. The larger coal size and smaller forward scattering angle could provide a shift to more favorable scattering regime, i.e., independent scattering, where interferences of light scattering from one particle with others are suppressed.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.322-328
• /
• 1991

We have studied a characterization method of accurate size of spherical particles by fitting experimental light scattering profile to the rigorous theoretical scattering function. An efficient software has been developed for computation of the theoretical scattering function and regression analysis. A light scattering instrument has been built and the necessary data acquisition and analysis are carried out by use of a personal computer with an emphasis on the reduction of analysis and time aiming that this study will be extended toward a development of a practical particle sizing apparatus. The performance of the instrument and the software has been evaluated with latex spheres and found to be satisfactory.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1083-1086
• /
• 2005

Light scattering measurement system that can evaluate light scattering characteristic from defects on silicon wafer surface has been developed. The system uses $Ar^+$ laser as an illumination source, and a highly sensitive photomultiplier tube (PMT) for detecting scattered light from defects. Unlike with conventional measurement system, our system has ability to measure scattered light pattern from wide range of scattering angles with changeable incidence condition. It is shown that our developed system is effective to discriminate the types and sizes of defects from basic experimental results using a microscatch and a PSL sphere.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.7
• /
• pp.558-562
• /
• 2012

As an alternative energy, Dye-sensitized solar cells (DSSCs) have received much attention due to low cost manufacturing procedure and high energy consumption rate. Incorporating scattering centers in the nanocrystalline photoanode or additional scattering layers on the nanocrystalline photoanode is an effective way to enhance the light harvest efficiency of the photoanode and the performance of dye-sensitized solar cells (DSSCs). The light scattering abilities of these scattering layers also depend on the relative sizes and phase of the particles in the layers. A higher surface area is normally obtained using large particle sizes. Therefore, transparent high surface area $TiO_2$ layers and an additional scattering layer consisting of $TiO_2$-Rutile 500 nm paste with relatively larger particles are attractive. In this work, we investigates the applicability of a hybrid $TiO_2$ electrode (or a working electrode with a light scattering layer) in a DSSCs. We fabrication various thin film using $TiO_2$ paste 20 nm and $TiO_2$ paste 500 nm. As a result, the efficiency of the a single structure thin film was 3.35% and the efficiency as scattering layer of hybrid structure thin film was 4.36%, 4.73%.

• Current Optics and Photonics
• /
• v.5 no.3
• /
• pp.329-335
• /
• 2021

The problem of polarized light scattering by a cylinder on or close to a planar substrate is analytically solved. The light is assumed to be normally incident to the axis of the cylinder. Transverse magnetic (TM) and transverse electric (TE) polarizations are treated separately. The solution for each polarization is composed of a coupled set of linear equations which couples the scattering characteristics of the cylinder and the planar substrate. The coupling comes from the scattering by the planar substrate and by the cylinder. The solution of the coupled set of equations obtained by iterative substitution consists of infinite series, where each term represents the contribution of single and multiple scatterings of all orders.