• Title/Summary/Keyword: light response curve

Search Result 44, Processing Time 0.028 seconds

Modeling of Microalgal Photosynthetic Activity Depending on Light Intensity, Light Pathlength and Cell Density (빛의 세기, 투과거리 및 세포농도에 따른 미세조류의 광합성 활성 모델링)

  • Yun, Yeong-Sang;Park, Jong-Mun
    • KSBB Journal
    • /
    • v.14 no.4
    • /
    • pp.414-421
    • /
    • 1999
  • The influenced of light intensity, cell density, and light pathlength on photosynthetic activity of Chlorella vulgaris were investigated. Since the light respon curve varied according to reaction conditions, the parameters estimated from nonlinear regression were proved to be apparent and could not be applied to various situations. The light response model incorporating the light penetration through the microalgal suspension was developed based upon the spatial distribution of the photosynthetic activity. This model showed a good agreement with experimental data at different cell densities and light intensities. Using the model the effects of cell density and light pathlenth were simulated and some dicussions about optimization of operation conditions of photobioreactors were carried out. Concludingly, the developed model can be useful for predicting microalgal photosynthesis and for determining the optimal operating conditions.

  • PDF

New Light Curve Analysis for Large Numbers of Eclipsing Binaries I. Detached and Semi-Detached Binaries

  • Kang, Young-Woon
    • Journal of Astronomy and Space Sciences
    • /
    • v.27 no.2
    • /
    • pp.75-80
    • /
    • 2010
  • Several survey observations have produced light curves of more than five thousand eclipsing binaries for last 15 years. Future missions such as the Large Synoptic Survey Telescope (LSST), the Panoramic Survey Telescope and Rapid Response System (Pan-STARRS) and Gaia are expected to yield hundreds thousands of new variable stars and eclipsing binaries. Current methods require a week to analyze the light curves of an eclipsing binary for its physical and orbital parameters. The current methods of analyzing the light curves will be inadequate to treat the overwhelming influx of new data. Therefore we developed a new method to treat large numbers of light curves of eclipsing binaries. We tested the new method by analyzing more than one hundred light curves of the detached and semi-detached eclipsing binaries discovered in the Small Magellan Cloud and present their fitted light curves with observations.

The Effects of Lithium Chloride on the Light-sensitivity and Circadian activity of Goldhamster. (LiCl이 Goldhamster의 빛 민감성과 활동주기에 미치는 영향)

  • 한상진
    • The Korean Journal of Zoology
    • /
    • v.35 no.4
    • /
    • pp.509-517
    • /
    • 1992
  • LiCl (0.047 M)은 Goldhamster의 활동주기 (T)를 평균 1.6시간 연장시키고, 동물 중 20%엑서 단축되는 것으로도 관찰되었다. 1시간 통안의 빛자극(75 Lux)에 의해 주기현상 시점 변화가 나타나는 데 LICI에 의해서 0.3 h 더욱 delav되었고 advance 현상은 1.5 h 감소되었으며 delay엔h advance 전환시기는 1시간 늦게 나타났다. 반면에 7 Lux의 빛 자극에서는 delay가 2.4시간으로 더 증가되었으며 advance 현상은 2.6시간으로 저하되었고, 30분 늦게 delay에서 advance로 전환되었다. subjective day 동안에는 빛자극에 의한 LiCl 효과가 전혀 보이지 않았다. Phase-Response-Curve(PRC)는 Circadian Time에서 delay-advance로 전환되는 mid-subjective night에 점진적으로 변화되는 weak phase curve로 형성되었다. 이 PRC에서 Li이 빛에 대한 민감성을 둔화시키는 효과를 볼 수 있다.

  • PDF

Estimation of viscous and Coulomb damping from free-vibration data by a least-squares curve-fitting analysis

  • Slemp, Wesley C.H.;Hallauer, William L. Jr.;Kapania, Rakesh K.
    • Smart Structures and Systems
    • /
    • v.4 no.3
    • /
    • pp.279-290
    • /
    • 2008
  • The modeling and parameter estimation of a damped one-degree-of-freedom mass-spring system is examined. This paper presents a method for estimating the system parameters (damping coefficients and natural frequency) from measured free-vibration motion of a system that is modeled to include both subcritical viscous damping and kinetic Coulomb friction. The method applies a commercially available least-squares curve-fitting software function to fit the known solution of the equations of motion to the measured response. The method was tested through numerical simulation, and it was applied to experimental data collected from a laboratory mass-spring apparatus. The mass of this apparatus translates on linear bearings, which are the primary source of light inherent damping. Results indicate that the curve-fitting method is effective and accurate for both perfect and noisy measurements from a lightly damped mass-spring system.

Photosynthetic Responses of four Oak Species to Changes in Light Environment (광환경 변화에 대한 네 참나무 수종의 광합성 반응)

  • Kim, Sun-Hee;Saung, Ju-Han;Kim, Young-Kul;Kim, Pan-Gi
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.10 no.4
    • /
    • pp.141-148
    • /
    • 2008
  • This study was conducted to investigate the photosynthetic responses of four Oak species (Quercus mongolica, Q. serrata, Q. acutissima and Q. variabilis) by shading treatment. We investigated light response curve, photosynthesis (A)-intercellular $CO_2$ concentration (Ci) curve, leaf growth and chlorophyll content at the level of 35, 55 and 75% shading treatments and under the full sunlight. In our results, Q. variabilis and Q. acutissima showed increased leaf growth, chlorophyll content and net apparent quantum yield but reduced chlorophyll a/b and carboxylation efficiency under the low light intensity. Therefore, light absorption and light utilization efficiency were improved under the low light intensity. Q. mongolica showed the similar responses that Q. variabilis and Q. acutissima showed, but net apparent quantum yield was reduced. The effects of shading treatment on Q. serrata were lower than those of other three species.

Early Alterations of Chlorophyll Fluorescence by Light-Chilling in Cucumber (Cucumis sativus) Leaves and Their Usage as Stress Indicators (오이 잎에서 저온 광저해에 의한 형광유도과정의 초기 변이와 스트레스 지표)

  • Ha, Suk-Bong;Young-Jae Eu;Choon-Hwan Lee
    • The Korean Journal of Ecology
    • /
    • v.19 no.2
    • /
    • pp.151-163
    • /
    • 1996
  • To investigate the early symptoms of light-chilling, alterations of chlorophyll fluorescence transients were monitored in cucumber (Cucumis sativus L. cv. Ilmichungjang) leaves. During 24 h chilling, decreases in (Fv)m/Fm, qE and qQ, and an increase in Fo were observed. The chilling effects were not recovered at room temperature, and a significant increase in Fo was observed during the recovery period. After 6 h chilling, ‘dip’(D) level of the transients became obscure, and the negative slope after ‘peak’(P) disappeared. The first derivative (dFv/dt) of the fast fluorescence rise curve was used to obtain more accurate information about the changes in the transients. The maximal rate of the fluorescence increase in the D-p rise curve (Fr) has been the most frequently used chilling stress indicator. However, a correct value of Fr could not be measured when the D level became obscure. This problem was overcome by introducing a new indicator, HFr (dFv/dt at Fv = 1/2 (Fv)m), and HFr gave very similar values to Fr. To monitor the changes in curvature around D level, another new parameter, ${\Delta}S$(D-Fr), was also introduced. These three parameters decreased very sensitively during light-chilling. In addition, increases in these parameters were observed during the first 2 h chilling, but this increase in Fr was also observed in pea leaf discs dark-chilled for 15 min, suggesting that this very early change is a common response to chilling in both pea and cucumber leaves. Quenching coefficients were also very sensitive to chilling, especially qE. Discussion on the usage of these parameters as chilling stress indicators is given in the text.

  • PDF

Modeling for DC characteristics of DFB-LD (DFB-LD의 DC와 AC 특성 분석)

  • 김호진;안상호;엄진섭
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.23 no.5
    • /
    • pp.1372-1383
    • /
    • 1998
  • In this paper, modeling for DC and AC characteristics analysis of DFB-LD was performed considering effects of .lambda./4-shifted gratingandspatial hole burning within a laser diode cavity. From the simulation for DC characteristics, Light-Current curve, optical power distribution and carrier density distribution within the cavity can be obtained. The simulation for AC characteristics porovides IM response and the amplitude and phase and the amplitude and phase response of FM with excellent accuracy.

  • PDF

Multi-Channel Two-Stage 시스템을 이용한 수질 독성 모니터링의 지표 확립 및 모사

  • Kim, Byeong-Chan;Gu, Man-Bok
    • 한국생물공학회:학술대회논문집
    • /
    • 2000.11a
    • /
    • pp.715-718
    • /
    • 2000
  • The character of a recombinant bioluminescent bacteria's light emission enables us to monitor toxicity in water, soil and air. In this study, various bioluminescent responses to water samples containing toxic chemicals, such as phenol and mitomycin C, were obtained and analysed through the use of a multi-channel two-stage minibioreactor system. The bioluminescent pattern from each channel can be used as a standard for identifying the degree of toxicity in field samples. When various concentrations of toxic chemicals were injected in a step manner, different bioluminescent patterns were obtained. Also this system showed variation in its bioluminescent pattern as the injection manner was changed, i.e. using a modified version of the bell-curve type injection. In conclusion, the toxicity was shown to be related with the bioluminescent response when using these standard bioluminescent patterns. Comparing this standard with a bioluminescent response from a field sample, we can estimate the degree of which the sample is toxic.

  • PDF

Flexure hinge mechanism having amplified rectilinear motion for confocal scanning microscopy using optical section

  • Kwon, Oh-Kyu;Park, Poo-Gyeon
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2001.10a
    • /
    • pp.162.6-162
    • /
    • 2001
  • Confocal scanning microscopy (CSM) is an important instrument in a wide variety of imaging applications because of its ability to provide three-dimensional images of thick, volume specimens. The mechanism for two-dimensional beam scanning and optical sectioning has an important roe in CSM as the three-dimensional profiler. This optical sectioning property arises from the use of a point detector, which serves to attenuate the signals from out-of-focus. The intensity profile for the open loop scanning should be matched with its response for the standard. The non-linearity can be minimized with the optical sectioning or the optical probe of the closed loop control. This paper shows the mathematical expression of the light such as the extinction curve in the optical fields of system using AO deflector, the axial/lateral response experimentally when the error sources change, and the methods of optical sectioning. Thorough design of optical sectioner is crucial to the success of CSM in the field ...

  • PDF

Effects of the isolation parameters on the seismic response of steel frames

  • Deringol, Ahmet H.;Bilgin, Huseyin
    • Earthquakes and Structures
    • /
    • v.15 no.3
    • /
    • pp.319-334
    • /
    • 2018
  • In this paper, an analytical study was carried out to propose an optimum base-isolated system for the design of steel structures equipped with lead rubber bearings (LRB). For this, 5 and 10-storey steel moment resisting frames (MRFs) were designed as Special Moment Frame (SMF). These two-dimensional and three-bay frames equipped with a set of isolation systems within a predefined range that minimizes the response of the base-isolated frames subjected to a series of earthquakes. In the design of LRB, two main parameters, namely, isolation period (T) and the ratio of strength to weight (Q/W) supported by isolators were considered as 2.25, 2.5, 2.75 and 3 s, 0.05, 0.10 and 0.15, respectively. The Force-deformation behavior of the isolators was modelled by the bi-linear behavior which could reflect the nonlinear characteristics of the lead-plug bearings. The base-isolated frames were modelled using a finite element program and those performances were evaluated in the light of the nonlinear time history analyses by six natural accelerograms compatible with seismic hazard levels of 2% probability of exceedance in 50 years. The performance of the isolated frames was assessed in terms of roof displacement, relative displacement, interstorey drift, absolute acceleration, base shear and hysteretic curve.