• 한국정보통신학회논문지
• /
• 제7권4호
• /
• pp.845-852
• /
• 2003

한국 남해 중부해역에서의 적조발생과 기상 및 해양 인자와의 관계, 적조발생 적지선정 그리고 위성을 이용한 적조모니터링의 가능성에 대하여 연구하였다. 적조는 전조사기간(1990∼2001)에 걸쳐서 매년 발생하고 횟수가 증가하는 경향을 보였다. 이때 주로 7월, 8월, 9월에 집중해서 발생을 했다. 적조발생 횟수를 증가시키는 메카니즘을 지배하는 가장 중요한 기상인자는 강수량이 였다. 적조형성과 관련된 해양환경학적인 조건은 따뜻한 수온, 저염분, 고농도의 부유물질, 낮은 인산염 및 질산염이 였다. 적조가 발생하는데 필요한 기본적인 기상조건은 최소한 2∼4일 전에 23.4∼54.5 nm(일누적값) 정도의 많은 강수량이 나타났다. 또한 적조발생 당일 적조가 잘 형성될 수 있는 우호적인 기상조건은 $24.6∼24.9^{\circ}C$(일평균값)의 따뜻한 기온, 2∼10.3 h(일 누적값)의 적절한 일조시수, 2.4∼4.6 m/s(일평균값)의 풍속 및 남서풍계열의 바람이 등이 요구되어 진다. 위성자료를 이용하여 적조발생 시의 농도와 공간분포를 파악할 수 있었다. 적조가 잘 발생할 수 있는 최적지로서는 여수∼돌산해역, 가막만 북부지역, 남해 일부해역, 나로도해역, 고흥 남부의 일부 연안, 득량만과 인접한 고흥 서부 해역이 였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.323-328
• /
• 2003

한국 남해 중부해역에서의 적조발생과 기상 및 해양 인자와의 관계, 적조발생 적지선정 그리고 위성을 이용한 적조모니터링의 가능성에 대하여 연구하였다. 적조는 전조사기간(1990~2001)에 걸쳐서 매년 발생하고 횟수가 증가하는 경향을 보였다. 이때 주로 7월, 8월, 9월에 집중해서 발생을 했다. 적조발생 횟수를 증가시키는 메카니즘을 지배하는 가장 중요한 기상인자는 강수량이였다. 적조형성과 관련된 해양환경학적인 조건은 따뜻한 수온, 저염분, 고농도의 부유물질, 낮은 인산염 및 질산염이였다. 적조가 발생하는데 필요한 기본적인 기상조건은 최소한 2~4일 전에 23.4~54.5mm(일누적값) 정도의 많은 강수량이 내려야한다. 또한 적조발생 당일 적조가 잘 형성될 수 있는 우호적인 기상조건은 24.64~26.48$^{\circ}C$(일평균값)의 따뜻한 기온, 2~10.3h(일 누적값)의 적절한 일조시수, 2.4~4.6m/s(일평균값)의 풍속 및 남서풍계열의 바람이 등이 요구되어진다. 위성자료를 이용하여 적조발생 시의 농도와 공간분포를 파악할 수 있었다. 적조가 잘 발생할 수 있는 최적지로서는 여수~돌산해역, 가막만 북부지역, 남해 일부해역, 나로도해역, 고흥 남부의 일부 연안, 득량만과 인접한 고흥 서부 해역이였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.181-181
• /
• 2012

Direct synthesis of graphene using a chemical vapor deposition (CVD) has been considered a facile way to produce large-area and uniform graphene film, which is an accessible method from an application standpoint. Hence, their fundamental understanding is highly required. Unfortunately, the CVD growth mechanism of graphene on Cu remains elusive and controversial. Here, we present the evidences for two different growth modes of graphene on Cu investigated by varying carbon feedstock (C2H2 and CH4) and working pressure. The number of uniform graphene layer grown by C2H2 increased with increasing its injection time. A combined secondary ion mass spectrometry (SIMS) and X-ray diffraction (XRD) study revealed a carbon-diffused Cu layer created below surface region of Cu substrate with the expansion of Cu lattice. The graphene on Cu was grown by the diffusion and precipitation mode not by the surface adsorption mode, because similar results were observed in graphene/Ni system. The carbon-diffused Cu layer was also observed after graphene growth under high CH4 pressure. Based on various previous results and ours, we have successfully found that there are two selective growth modes for graphene on Cu substrate, and a desired mode can be chosen by tuning working pressure corresponding to the kind of carbon feedstock. We believe that this finding will shed light on high quality graphene growth and its multifaceted applications.

• Journal of Pharmaceutical Investigation
• /
• 제34권5호
• /
• pp.401-406
• /
• 2004

To develop an intravenous delivery system of all-trans retinoic acid (ATRA) for the cancer therapy, poly(L-lactic acid) nanoparticles were prepared and characterized. Emulsification-solvent evaporation method was chosen to prepare submicron sized nanoparticles. Spherical nanoparticles less than 200 nm in diameter with narrow size distribution were prepared, and the entrapment efficiency of drug was more than 95%. The endothermic peak at $183^{\circ}C$ and X-ray crystallographic peak of ATRA appeared in the nanoparticle system, suggesting the inhibition of crystallization of ATRA by polymer adsorption during the precipitation process. ATRA was released at $37^{\circ}C$ for 60 days and the release rate was dependent on the concentration of drug incorporated in the nanoparticles. While ATRA was unstable in the light, it was very stable at $4^{\circ}C$. These results suggest the usefulness of PLA nanoparticles as a sustained and prolonged release carrier for ATRA.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권10호
• /
• pp.1498-1504
• /
• 2005

Competitive direct ELISA was developed to detect gentamicin residues. Mice immunized with gentamicin-keyhole limpet hemocyanin (KLH) conjugate developed good antiserum titers, which gradually increased with booster injections, indicating immunization was successfully processed. Monoclonal antibody against gentamicin was prepared using hybridoma cells cloned by limit dilution of fused cells. IgG was purified from ascites fluid of hybridoma cell-injected mice through ammonium sulfate precipitation and Sephadex G-25 gel filtration. After the gel filtration, fractions of high antibody titer were further purified through affinity chromatography on protein A/G column. Monoclonal antibody against gentamicin was confirmed as IgG1, which has kappa light chain. Cross-reactivities ($CR_{50}$) of gentamicin monoclonal antibody to other aminoglycosides (kanamycin, neomycin, and streptomycin) were less than 0.005%, indicating the monoclonal antibody was highly specific for gentamicin. Standard curve constructed through competitive direct ELISA showed measurement range (from 80 to 20% of B/$B_0$ ratio) of gentamicin was between 1 and 40 ng/ml, and 50% of B/$B_0$ ratio was about 4 ng/ml. The gentamicin concentration rapidly increased to 1,300 ng/ml after the intramuscular administration up to 2 h, then sharply decreased to less than 300 ng/ml after 4 h of withdrawal, during which the elimination half-life ($t_{1/2}$) of gentamicin in the rabbit plasma was estimated to be 1.8 h. Competitive direct ELISA method developed in this study using the prepared monoclonal antibody is highly sensitive for gentamicin, and could be useful for detecting gentamicin residues in plasma of live animals.

• Ocean and Polar Research
• /
• 제36권4호
• /
• pp.437-445
• /
• 2014

A time-series sediment trap was operated at a water depth of 4950 m from July 2003 to May 2004 at KOMO station ($10^{\circ}30^{\prime}N$, $131^{\circ}20^{\prime}W$) in the northeastern equatorial Pacific, with the aim of understanding the temporal variation of planktonic foraminifera assemblages in response to the seasonal shift of Inter-Tropical Convergence Zone (ITCZ). A total of 22130 planktonic foraminifera specimens belonging to 30 species and 11 genera were identified, which shows a distinct seasonal variation with high values (125~288 specimens $m^{-2}day^{-1}$) in the winter to spring (December-May) and low values (16~23 specimens $m^{-2}day^{-1}$) in the fall (September-November). In addition, seasonal ecological differences of foraminifera assemblages are distinctly recognizable: omnivorous foraminifera occurred predominantly during the summer season, whereas herbivorous ones were dominant during the winter season. Such seasonal variations correspond to the seasonal shift of the ITCZ. Enhanced occurrence of herbivorous species during the winter-spring season seems a result of surface water mixing generated by the southward shift of the ITCZ. The increase in omnivorous species during the summer season may be due to the northward movement of the ITCZ caused by weakened wind speed, resulting in the intensification of water column stratification and nutrient-poor environment. A significant reduction of planktonic foraminifera specimens during the fall is attributed to heavy precipitation and reduction in light intensity.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.620-625
• /
• 2002

Considering the fuel consumption of car, a light structure of aluminum alloys is desired for car body nowadays. However, fusion welding of aluminum alloys has some problems of reduction of joint efficiency, porosity formation and hot cracking. ill the present work, investigation to improve the joint performance of laser welded joint has been carried out by addition of Cu, Ni, and Zr to A6N01 alloy welds. Aluminum alloy plate of 2.0mm in thickness with filler metal bar was welded by twin beam Nd:YAG laser facility (total power:5kW). The filler metals were prepared by changing the chemical compositions for adding the elements into the weld metal. Thirteen filler metal bars were prepared and pre-placed into the base metal before welding. Ar gas shielding with a flow rate of 10 l/min was used. The defocusing distance is kept at 0 mm. At travel speeds of 3 to 9 m/min and at laser power of 5kW (front beam 2kW rear beam 3kW), full penetration welds were obtained, whereas at travel speeds of 12 to 18 m/min and same power, partial penetration was observed. The joint efficiency of laser-welded joint was improved by the addition of Cu, Ni, and Zr due to the solid solution hardening, grain refining and precipitation hardening. The type of hardening has been further considered by metallurgical examination.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.535-539
• /
• 2002

이 연구는 저온균일침전법으로 제조한 루타일 상의 TiO$_2$ 나노분말을 이용하여 AgNO$_3$ 수용액 중에서 광반응 조건에 따른 Ag 이온의 광흡차 특성을 고찰하였다. 자연광을 조사하였을 경우 흡척되는 Ag의 양이 9.32ppm이며 Ag 이온의 환원 속도는 느리지만 루타일 TiO$_2$ 나노분말이 자연광에서도 광촉매 반응을 일으킨다는 것을 확인하였다. 암반응 하에서도 TiO$_2$ 나노분말 자체의 밤송이 형태 때문에 Ag흡착 반응이 진행되었으며, UV를 적용할 때에는 120분 이내에 Ag 이온이 전부 흡착되었다. 광촉매 반응이 더 중요시 됨을 알수 있었다. 흡착 반응속도상수와 흡착 평형속도상수를 계산한 결과, 각각 0.0004g/min와 1494.20(120 $m^2$/g)를 나타내었다.

• 한국지구과학회지
• /
• 제26권7호
• /
• pp.714-724
• /
• 2005

The East Sea, a semi-enclosed marginal sea with shallow straits in the northwest Pacific, is marked by the nearly geographic isolation and the low sea surface salinity during the last glacial maximum (LGM). The East Sea might have the only connection to the open ocean through the Korea Strait with a sill depth of 130 m, allowing the paleo-Tsushima Water to enter the sea during the LGM. The low paleosalinity associated with abnormally light $\delta^{18}O$ values of planktonic foraminifera is interpreted to have resulted from river discharge and precipitation. Nevertheless, two LGM features in the East Sea are disputable. This study attempts to estimate volume transport of the paleo-Tsushima Water via the Korea Strait and further examines its effect on the low sea surface salinity (SSS) during the lowest sea level of the LGM. The East Sea was not completely isolated, but partially linked to the northern East China Sea through the Korea Strait during the LGM. The volume transport of the paleo-Tsushima Water during the LGM is calculated approximately$(0.5\~2.1)\times10^{12}m^3/yr$ on the basis of the selected seismic reflection profiles along with bathymetry and current data. The annual influx of the paleo-Tsushima Water is low, compared to the 100 m-thick surface water volume $(about\;79.75\times10^{12}m^3)$ in the East Sea. The paleo-Tsushima Water influx might have changed the surface water properties within a geologically short time, potentially decreasing sea surface salinity. However, the effect of volume transport on the low sea surface salinity essentially depends on freshwater amounts within the paleo-Tsushima Water and excessive evaporation during the glacial lowstands of sea level. Even though the paleo-Tsushima Water is assumed to have been entirely freshwater at that time period, it would annually reduce only about 1‰ of salinity in the surface water of the East Sea. Thus, the paleo-Tsushima Water influx itself might not be large enough to significantly reduce the paleosalinity of about 100 m-thick surface layer during the LGM. This further suggests contribution of additional river discharges from nearby fluvial systems (e.g. the Amur River) to freshen the surface water.

• 한국세라믹학회지
• /
• 제56권4호
• /
• pp.360-364
• /
• 2019

PZT suspensions for photo-curable 3D printing were fabricated and their characteristics were evaluated. After mixing the PZT, photopolymer, photo-initiator, and dispersant for 10 min by using a high-shear mixer, the viscosity characteristics were investigated based on the powder content. To determine an appropriate dispersant content, the dispersant was mixed at 1, 3, and 5 wt% of the powder and a precipitation test was conducted for two hours. Consequently, it was confirmed that the dispersibility was excellent at 3 wt%. Through thermogravimetric analysis, it was confirmed that weight reduction occurred in the photopolymer between 120? and 500?, thereby providing a debinding heat treatment profile. The fabricated suspensions were cured using UV light, and the polymer was removed through debinding. Subsequently, the density and surface characteristics were analyzed by using the Archimedes method and field-emission scanning electron microscopy. Consequently, compared with the theoretical density, an excellent characteristic of 97% was shown at a powder content of 87 wt%. Through X-ray diffraction analysis, it was confirmed that the crystallizability improved as the solid content increased. At the mixing ratio of 87 wt% powder and 13 wt% photo-curable resin, the viscosity was 3,100 cps, confirming an appropriate viscosity characteristic as a stereolithography suspension for 3D printing.