• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.96-97
• /
• 2000

Incoherent broadband optical sources have been applied in various areas such as a light source for optical device characterization, fiber-optic gyroscopes$^{(1)}$ , and spectrum sliced light source in wavelength division multiplexing (WDM) system$^{(2)}$ . To utilize the inherent low loss in silica optical fibers, various types of incoherent light sources are being developed. Among the light sources, the amplified spontaneous emission (ASE) from a rare earth doped fiber has benefits in temperature stability, high output power, low polarization dependence over semiconductor diodes$^{(3)}$ . Recently erbium doped fibers (EDF) have been intensively researched for ASE sources as well as optical amplifiers$^{(4)}$ . The spectrum of ASE from an EDF, however, is limited in the 1520~1560 nm range in conventional configurations. In this letter we described a new broadband ASE source which included both the conventional ASE band of Er$^{3+}$ ion, 1520nm~1560nm and ASE band from Tm$^{3+}$ ions that extends the bandwidth further. For the first time, to the best knowledge of authors, a fiber ASE source based on the energy transfer between Er$^{3+}$ and Tm$^{3+}$ ions in the range of 1460~1550 nm, has been demonstrated using a single 980nm pump laser diode. (omitted)omitted)

• Korean Journal of Optics and Photonics
• /
• v.20 no.6
• /
• pp.375-380
• /
• 2009

The scattering of a normally incident monochromatic light by optically active concentric double cylinders is studied by using a numerical method. A numerical code is developed on the basis of the analytical solutions, and the angular distributions of the intensity and the polarization of the scattered light are computed for some specific cases. The numerical code can be used to non-invasively determine the size, structure, and composition of a double cylinder with high accuracy by measuring the angular distribution of the scattered light by an experiment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.607-617
• /
• 1999

In this paper, we fabricated dual polarization microstrip array antenna to analyze the performance of polarization diversity of each antennas beamwidth and recommend suitable polarizations diversity antenna under indoor environments. The proposed antennas which have directional beam patterns are small, light and thin. Also they are $1\times4$ array and $4\times4$ array antenna with $70^{\circ}$, $20^{\circ}$ beamwidth, respectively. The center frequency is 1890 MHz, IMT-2000's frequency. We also measured the antennas characteristics of each beamwidth in various waveguide structured corridor and compared then with the case of space diversity using the dipole antenna. The measurement shows that the polarization diversity using directional dual polarization microstrip array antennas has more 1~7 dB diversity gain than the space diversity using the dipole antenna. Therefore, the proposed antennas are expected to be efficiently used for the design of optimal directional beam pattern antenna and diversity system for indoor environments.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.4
• /
• pp.336-350
• /
• 2001

The purpose of this study was to investigate corrosion tendency and to compare corrosion resistance of three dental magnetic attachments and its keeper alloy by coercive, electrochemical method. By using petentiodynamic polarization technique, magnetic elements and its keeper alloy of Magfit EX600 system(MF, MFK), Dyna ES regular system(DN, DNK) and Shiner SR magnet system(SR, SRK) were corroded electrochemically in 0.9% NaCl electrolytic solution. Open-circuit potential and anodic polarization curve was measured with Potentiostat(model 273 EG&E) and polarization curve was created by current density per square area following scanning of increased series of voltage in the rate of 1.0mV per second. Before and after electrochemical corrosion, the surface roughness test was done. Thereafter the change of mean surface roughness value(Ra) and mean peak value(Rt) of surface roughness was compared one another. In order to observe the corroded surface of each specimen, metallurgical light microscopic(${\times}37.5$) and scanning electron microscopic view(SEM ${\times}100$) was taken and compared one another. Conclusion is followings. 1. All of six covering metal of dental magnetic attachments and its keeper alloy were corroded in various degree after electrochemical corrosion. 2. The corrosion resistance of which used in this experiment is the following in high order; DNK, MFK, DN, MF, SRK and SR. 3. Especially Shiner magnet system and its keeper alloy were more severely corroded after electrochemical corrosion and the change of Ra Rt value were more increased than others. 4 Metallurgical and scanning electron microscopic view showed the pitting corrosion tendency of all experimental alloy but DNK and SR. 5. Covering metal of magnet was more corroded than its keeper alloy.

• Korean Journal of Optics and Photonics
• /
• v.22 no.5
• /
• pp.219-222
• /
• 2011

Integrated optical waveguide polarization converters are among the essential components for constructing various functional optical integrated circuits. The RM materials have been widely used in liquid crystal displays for fabricating waveplates. In this work, the polarization converters are fabricated by using a solution of Reactive Mesogen(RM) dissolved in liquid crystal(LC). In the middle of the polymer waveguide, a groove is defined by an oxygen plasma etching in a direction perpendicular to the optical waveguide. The solution of RM-LC is inserted to fill up the groove, and then liquid crystal is aligned in a certain direction by applying an electric field. After the alignment, RM materal is crosslinked by UV light so as to form a permanent waveplate. The phase retardation of the waveplate is determined by the width of the groove, and by the birefringence and the degree of alignment of the LC. Polarization conversion efficiency of 90% is obtained for the wavelength of 1550 nm.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.259-271
• /
• 2019

We evaluated mineralogical, physical property and accelerated weather resistance of cinnabar, realgar and orpiment used as cultural heritages and traditional paintings. JB and JS are sample names of cinnabar and JH and UH are sample names of orpiment and Realgar, respectively. As a result of mineralogical property evaluation, Jinsa was identified cinnabar (HgS) and there was no difference in chemical composition according to the grade. UH and JH were confirmed realgar (AsS) and orpiment (As₂S₃), respectively. The polarization characteristics such as shape and color indicate that pigments using our test were natural mineral pigment observed by polarization microscope. Especially, in the case of cinnabar, it is not easy to distinguish between natural mineral pigment and synthetic pigment. But the results of polarization microscope said that cinnabar is natural occurring mineral which have authentic mineral particle and unevenly fracture. As a result of thermal analysis, JH has a higher glass transition temperature and heat stability than UH. After accelerated weather test, cinnabar, realgar and orpiment were striking result in color change because of light degradation. Red color of cinnabar turn into black and the color of realgar and orpiment became brighter than before. JB (meta-cinnabar) is more photosensitivity and faster becoming dark than JB (cinnabar). Finally light transforms realgar (red, As₄S₄) in arsenolite (As₂O₃).

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.399-405
• /
• 2003

We manufactured a clamp-type optical current transformer (COCT) head using FD10 glass. It was manufactured of two parts of FD10 glass with symmetrical structure and was designed so that light propagates along the critical angle in order to avoid a phase difference with the light within the sensor head at reflection. Also, we measured and analyzed the current of conductor from 0 to 1,000 AT, change of optical power with incidence angle of light, temperature and polarization of light, long-term current measurement using COCT head, and demonstrated the feasibility of manufactured COCT through those experiments.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.65-67
• /
• 2015

The surfaces of most atmosphereless solar system objects are referred to as regolith, layers of loosely connected fragmentary debris, produced by meteorite impacts. Measurements of light scattered from such surfaces provides information about the composition and structure of the surface. A suitable way to characterize the scattering properties is to consider how the intensity and polarization of scattered light depends on the particle size, composition, porosity, roughness, wavelength of incident light and the geometry of observation. In the present work, the effect of porosity on bidirectional reflectance as a function of phase angle is studied for alumina powder with grain size of $0.3{\mu}m$ and olivine powder with grain size of $49{\mu}m$ at 543.5 nm. The optical constants of the alumina sample for each porosity were calculated with Maxwell Garnett effective medium theory. On using each of the optical constants of alumina sample in Mie theory with the Hapke model the variation of bidirectional reflectance is obtained as a function of phase angle with porosity as a parameter. Experimental reflectance data are in good agreement the model. For the olivine sample the effect of porosity is studied using Hapke (2008).

• Journal of Sensor Science and Technology
• /
• v.28 no.4
• /
• pp.262-265
• /
• 2019

The effect of inter-band transition on surface plasmon resonance in gold thin film was investigated. We induced localized inter-band transition in the film by using incident light on its surface from a green laser (532 nm) source, and the surface plasmon resonance for inter-band transition was investigated at different wavelengths. It was determined that the reflectivity of blue light (450 nm) was significantly reduced in the region where the green laser was incident. We demonstrated that this decrease is mainly due to the coupling between the blue light and the surface plasmon resonance of excited electrons in higher energy states, based on experimental results for the incident and polarization angle-dependent reflectivity of the blue light.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.262-263
• /
• 2002

오늘날 정보화 사회가 세계적으로 구축됨에 따라 초고속 광네트워크 사이의 통신용량의 급격한 증가로 인하여 대용량의 정보를 초고속으로 처리할 광스위치의 필요성이 심각하게 대두되고 있다.[1] 현재 연구되고 있는 광스위치 중에는 광도파로 형테와 MEMS형, 기계식 형태가 있다.[2] 그러나 이들 형태의 광스위치는 대용량과 초고속이라는 두 개의 기능을 동시에 수행하기에는 기술적 어려움이 있다. (중략)