• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.188-190
• /
• 2004

As an effort to reduce cost and lead-time and to increase flexibility and responsiveness, manufacturers are using digital printing in numerous process steps. Typically, these processes require the precise dispensing of various fluids. Piezo ink jet printheads are proving to be reliable tools for depositing active materials such as light emitting polymers (LEP) for mobile phone displays and color filter inks for liquid crystal displays. Ink jets are also being used to provide uniform coatings of polyimide alignment layers and spacers for LCDs. Success with legend printing on PCBs using ink jets has encouraged the design of equipment for directly printing both etch resist and solder mask for PCBs. Development of printers for passive components such as capacitors and resistors is underway. This paper will present the attributes of an ink jet printhead designed to a precision deposition tool and discuss how it is being used to digitally print electronic and flat panel display components. Status of commercialization of digital printing will be discussed along with issues to be resolved before wide adoption takes place.

• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.61-68
• /
• 2010

Optical simulation methods were applied to the edge-lit LED backlight for LCD TV applications in order to optimize the optical structure of the light guide plate(LGP), and thus to improve the uniformity properties by removing the bright spots caused by LED's. The edge-lit LED backlight consisted of three white LED's with a lamp cover, a light guide plate, and a reflection film. When there was no pattern on the entrance side surface of the LGP, the illuminance uniformity was sensitively dependent on the distance d between the LED and the entrance surface. The illuminance uniformity increased with d but its increasing rate slowed down when d was beyond ~ 1.5 mm. When micro-patterns such as a lenticular lens array (LLA) or a serration pattern were formed on the entrance surface, the illuminance uniformity was improved substantially even for the case of very small d. At the same simulation condition, the lightguide with serration pattern showed a better uniformity than that with LLA pattern. Additional improvement could be achieved by changing the refractive index of the micro-patterns. These results suggest that using micro-patterns is a very effective way to reduce the bright spots due to their refracting function for the concentrated incident rays onto the LGP.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.1
• /
• pp.9-18
• /
• 2019

Concrete, which is the most widely used building material in modern times, has been improved not only in strength but also in structural performance such as increase in toughness and ductility, weight reduction, and improvement in quality of human life. Due to the surge in demand for the building, there is a tendency to be used variously from architectural panel and architecture to interior accessories. In Korea, a light-transmitting concrete, LEFC(Light Emotion Friendly Concrete), that insert plastic rods to stimulate emotional sensation through the combination of light and concrete has developed. In previous research, it was confirmed that the use of a synthetic foam agent rather than an animal foam agent did not cause a fogging phenomenon. In this study, lightweight by applying foaming agent to LEFC and two types of fiber (Nylon Fiber, Polyvinyl Alcohol) were compared to achieve to investigate the fiber to be applied in future. An equation that can predict the loss and adhesion reduction of the concrete section according to the diameter of the rod (5mm, 10mm) and the interval (10mm, 15mm, 20mm) was proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.212-217
• /
• 2020

The PV power generation system is a comprehensive system that transmits the power generated through a PV panel to a grid connection and is composed of a solar panel, a structure, and an inverter grid connection system. One technology to increase the amount of power generated involves changing the incident angle of sunlight. This study examined the structure and control of a single-axis tracking PV system that increases the amount of power generated by changing the incident angle. The core content is a single-axis control system and technology configured to rotate the solar structure in the east-west direction around the north-south axis. A solar structure that follows the sun from sunrise to sunset in the east-west direction needs to secure structural stability and solar tracking control performance. A single-axis tracking system can generate up to 25% more power.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.1
• /
• pp.114-123
• /
• 2017

The global small and mid-sized display market is changing from thin film transistor-liquid crystal display to organic light emitting diode (OLED). Reflecting these market conditions, the domestic and overseas display panel industry is making great effort to innovate OLED technology and incease productivity. However, current OLED production technology has not been able to satisfy the quality requirement levels by customers, as the market demand for OLED is becoming more and more diversified. In addition, as OLED panel production technology levels to satisfy customers' requirement become higher, product quality problems are persistently generated in OLED deposition process. These problems not only decrease the production yield but also cause a second problem of deteriorating productivity. Based on these observations, in this study, we suggest TRIZ-based improvement of defects caused by glass pixel position deformation, which is one of quality deterioration problems in small and medium OLED deposition process. Specifically, we derive various factors affecting the glass pixel position shift by using cause and effect diagram and identify radical reasons by using XY-matrix. As a result, it is confirmed that glass heat distortion due to the high temperature of the OLED deposition process is the most influential factor in the glass pixel position shift. In order to solve the identified factors, we analyzed the cause and mechanism of glass thermal deformation. We suggest an efficient method to minimize glass thermal deformation by applying the improvement plan of facilities using contradiction matrix in TRIZ. We show that the suggested method can decrease the glass temperature change by about 23% through an experiment.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.12
• /
• pp.1035-1044
• /
• 2013

Because of the high specific stiffness and strength inherent in the sandwich structure composed of facesheet that resists in-plane loads and a core that resists out-of-plane loads, it is often used for large and light-weighted structures. However, inevitably the increased flexibility allows greater deformation-based disturbances in the structures. Thus, it is necessary to analyze the structural safety. To obtain more accurate analytical results, the input disturbances must more closely simulate real load conditions; to improve accuracy, non-linear elements such as gust effects were considered. In addition, the structural safety was analyzed for the iso-grid sandwich panel structure using fluid-structure interactions. For a more realistic simulation, flow velocity fields, which consider the effects of irregular gust fluctuation, were generated and the coupled field was analyzed by mapping the pressure and displacement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.726-728
• /
• 2013

Optoelectronic arc discharge sensor was used to detect arc discharge inside power distribution panel. Arc discharge is fatal to power system once it begins, thus preventive detection is necessary before power failure occurs. Optoelectronic detection method was used to avoid direct electrical contact to power apparatus inside power distribution panel. 180 degree detection angle and detection range far exceeding 6m, which was sufficient for monitoring purpose, was achieved using the photodiode having $7.5mm^2$ of active surface area and flash source with $0.4cal/cm^2$ energy density, which is equivalent to 1.9J with $2.16cm^2$ emitting area. The response speed of arc discharge sensor was measured to be below 1 msec. The above optoelectronic arc discharge sensor was measured to be sensitive enough to detect 0.94 pC charge.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1702-1708
• /
• 2013

OLED has good efficiency of power consumption by having no power consumption from black color as different with LCD. when it has white color, all RGB pixel should be glowing with high power consumption and that can make it has short life time. This paper suggest the way of low power consumption for OLED panel using adaptive luminance enhancement with color compensation and implement it as hardware. This way which is based on luminance information of input image makes converted luminance value from each pixel in real time. There is with using the basic idea of chromaticity reduction algorithm, showing new algorithm of color correction. And performance of proposed method was confirmed by comparing the conventional method in experiments about 48.43% current reduction. The proposed method was designed by Verilog HDL and was verified by using OpenCV and Windows Program.

• Korean Journal of Food Science and Technology
• /
• v.17 no.5
• /
• pp.355-360
• /
• 1985

Soybean, hydrogenated soybean and corn oils, which were exposed to fluorescent light for different periods of time, were evaluated for sensory qualities by subjective sensory evaluation and instrumental gas chromatographic analysis. Sensory evaluation was conducted in 8 laboratories using a 10-point hedonic scale with a total of 95 panel members. The correlation coefficients between sensory scores and predicted sensory scores by gas chromatographic analysis for the 8 laboratories varied from 0.10 to 0.99. However, most laboratories had better than 0.90, which was considered excellent. The correlation coefficients between sensory scores of the 95 panel members and predicted sensory scores using the amount of 2. 4-decadienal isomers in oil determined by a gas chromatographic method for soybean, hydrogenated soybean, and corn oils, were r=0.96, r=0.97, and r=0.97, respectively. The correlation study suggests that it is possible to obtain realistic results of oil flavor qualities from the instrumental evaluation by combining improved gas chromatographic analysis, sensory evaluation, and statistical analysis for practical purposes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.483-491
• /
• 2019

The aim of this study is to shed light on factors that influence securing of university research grants. For this purpose, this study emphasizes the role of management capability of industry-university cooperation foundation in securing research grants. We analyze whether the potential capabilities influence research grants using panel data from 194 universities during 2016 to 2018. The results obtained from the Driscoll & Kraay standard errors (DKSE) indicate that a number of variables including the portion of industry-university collaboration professors, academic performance of professors, and the number of paid researchers are positively associated with the amount of external research grant approved. However, the percentage of employees employed for less than two years is negatively related with securing external research grants. Once the dependent variable is measured by the total university research grants, the negative coefficient of employees with short-term career disappears. Instead, the percentage of employees who are in charge of research planning and management and the total number of employees involved in industry-university collaboration foundations are negatively related with the total university research grant amounts.