• KSBB Journal
• /
• 제28권3호
• /
• pp.170-176
• /
• 2013

The purpose of this study was to determine optimum condition of Pavlova lutheri and Phaeodactylum tricornutum. Detailed studies were carried out on the effects of various wavelengths of light-emitting diodes (LEDs), light intensities and air flow rations. For the Pa. lutheri, cell growth rates and maximum cell concentrations were similar regardless of wavelengths and air flow rates. Among the different light intensities, cell concentration increased when light intensity of red LED increased. For Ph. tricornutum, red LED was found to be the most effective light source, and light intensity of 3,100 Lux resulted in the most effective for the cultivation of Ph. tricornutum. Different air flow rates were tested to overcome shading effects due to denser cell concentration in the solution. Aeration of 0.8 vvm was determined to be the optimum aeration rate for the cultivation of Ph. tricornutum. Especially, five and two times greater cell concentrations of Pa. lutheri and Ph. tricornutum, respectively, were observed when air was applied.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.997-999
• /
• 1999

We fabricated white light-emitting organic electroluminescent device which have a mixed single emitting layer containing poly(N-vinylcarbazole)[PVK], tris(8-hydroxyquinoline)aluminum[Alq3] and poly(3-hexylthiophene)[P3HT] and investigated the emission properties of it. We expect to obtain a blue light from PVK, green light from Alq3 and red light from P3HT The fabricated device emits white light over 18V with slight orange light. We think that the energy transfer in a mixed layer occurred from PVK to $Alq_3$ and P3HT resulted in decreasing the blue light intensity from PVK. With mixing of N, N'-diphenyl-N, N'-(3-methylphenyl)-[1,1'-biphenyl]-4, 4'-diamine[TPD], hole transport material, to the emitting layer, the luminance intensity of device was increased 50 times than that of the device which not contain TPD. We find that the efficiency of the white light electroluminescent device can be improved by injecting electron more effectively and blue light need to improve the color purity of white light.

• 한국해양바이오학회지
• /
• 제8권1호
• /
• pp.24-29
• /
• 2016

Microalgae are considered as superior biodiesel producers, because they could effectively produce high amount of lipid with fast growth rate. In this study, Chlorella vulgaris was exposed to various light wavelengths (${\lambda}_{max}$ 470 nm, ${\lambda}_{max}$ 525 nm, and ${\lambda}_{max}$ 660 nm) using light emitting diodes (LEDs) to examine effect of light quality on their growth and fatty acid production in 0.4-L bubble column photobioreactors. Fluorescent lamps were also used as polychromatic light sources (control). From the results, biomass productivity was varied by light wavelength from 0.05 g/L/day to 0.30 g/L/day. Maximum biomass productivity was obtained from red LED among tested ones. We also observed that contents of oleic acid and linolenic acid, which affect biodiesel properties, were significantly changed depending on supplied wavelength. These results indicated that production of algal biomass, and fatty acid content and productivity could be improved or controlled by supplying specific light wavelength.

• Journal of Information Display
• /
• 제8권2호
• /
• pp.20-24
• /
• 2007

Efficient white organic light-emitting diodes are fabricated with the blue and red electroluminescent (EL) units electrically connected in a stacked tandem structure by using a transparent doped organic p/n junction. The blue and red EL units consist of the light-emitting layer of 1,4-bis(2,2-diphenyl vinyl)benzene (DPVBi) and 4-dicyanomethylene-2-methyl-6-[2-(2,3,6,7-tetrahydro-1H,5H-benzo[i,j] quinolizin-8-yl)vinyl]-4H-pyran) (DCM2) doped tris(8-hydroxyquinoline) aluminum $(Alq_3)$, respectively. The organic p-n junction consists of ${\alpha}-NPD$ doped with $FeCl_3$ (15 % by weight ratio) and $Alq_3$ doped with Li (10 %). The EL spectra exhibit two peaks at 448 and 606 nm, resulting in white light-emission with the Commission Internationale d'Eclairage (CIE) chromaticity coordinates of (0.36, 0.24). The tandem device shows the quantum efficiency of about 2.2 % at a luminance of 100 $cd/m^2$, higher than individual blue and red EL devices.

• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.451-456
• /
• 2013

To study emission properties of white phosphorescent organic light emitting devices (PHOLEDs), we fabricated white PHOLEDs of ITO(150 nm) / NPB(30 nm) / TcTa(10 nm) / mCP(7.5 nm) / light-emitting layer(25 nm) / UGH3(5 nm) / Bphen(50 nm) / LiF(0.5 nm) / Al(200 nm) structure. The total thickness of light-emitting layer with co-doping and blue-doping/co-doping using a host-dopant system was 25 nm and the dopant of blue and red was FIrpic and $Bt_2Ir$(acac) in UGH3 as host, respectively. The OLED characteristics were changed with position and thickness of blue doping layer and co-doping layer as light-emitting layer and the best performance seemed in structure of blue-doping(5 nm)/co-doping(20 nm) layer. The white PHOLEDs showed the maximum current density of $34.5mA/cm^2$, maximum brightness of $5,731cd/m^2$, maximum current efficiency of 34.8 cd/A, maximum power efficiency of 21.6 lm/W, maximum quantum efficiency of 15.6%, and a Commission International de L'Eclairage (CIE) coordinate of (0.367, 0.436) at $1,000cd/m^2$.

• 한국콘텐츠학회논문지
• /
• 제8권11호
• /
• pp.18-24
• /
• 2008

유기 발광 다이오드(Organic light-emitting diode, OLED)는 저전력 구동, 자체발광, 넓은 시야각, 우수한 고해상도, 풀 칼라, 높은 재현성, 빠른 응답속도, 간편한 제조 공정 등의 장점을 가지고 있으나, 고성능 디스플레이로서 실용화하기 위해서는 아직도 해결되어야 할 과제가 많다. 소자의 저소비전력, 제조공정의 안정성, 대형 기판기술, 봉지 기술, 소자의 수명, 풀 컬러화를 위한 적색, 청색, 발광 소자의 고휘도등이 시급하다. 무엇보다 중요한 것은 유기 발광 소자의 효율을 향상시키는 것이 상용화를 위한 키(key)이다. 이를 위해서 유기 발광 소자의 구조 개선과 새로운 유기 물질 적용을 통해 구동전압을 낮춤으로써 효율을 향상시킬 수 있다. 따라서 본 연구에서는 유기 발광 소자의 효율을 향상시킬 목적으로 ITO/TPD/Znq2+DCJTB/Znq2/Al의 구조와 ITO/CuPc/NPB/Alq3+DCJTB/Alq3/Al의 구조를 가지는소자의 발광 층에 형광염료를 도포한 적색 발광 소자를 제작하고, 그 전기적 및 광학적인 특성을 평가하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.124-129
• /
• 2015

Organic electronics are the domain in which the components and circuits are made of organic materials. This new electronics help to realize electronic and optoelectronic devices on flexible substrates. In recent years, organic materials have replaced conventional semiconductors in many electronic components such as, organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs) and organic photovoltaic (OPVs). It is well known that organic light emitting diodes (OLEDs) have many advantages in comparison with inorganic light-emitting diodes LEDs. These advantages include the low price of manufacturing, large area of electroluminescent display, uniform emission and lower the requirement for power. The aim of this paper is to model polymer LEDs and OLEDs made with small molecules for studying the electrical and optical characteristics. The purpose of this modeling process is, to obtain information about the running of OLEDs, as well as, the injection and charge transport mechanisms. The first simulation structure used in this paper is a mono layer device; typically consisting of the poly (2-methoxy-5(2'-ethyl) hexoxy-phenylenevinylene) (MEH-PPV) polymer sandwiched between an anode with a high work function, usually an indium tin oxide (ITO) substrate, and a cathode with a relatively low work function, such as Al. Electrons will then be injected from the cathode and recombine with electron holes injected from the anode, emitting light. In the second structure, we replaced MEH-PPV by tris (8-hydroxyquinolinato) aluminum (Alq₃). This simulation uses, the Poole-Frenkel -like mobility model and the Langevin bimolecular recombination model as the transport and recombination mechanism. These models are enabled in ATLAS- SILVACO. To optimize OLED performance, we propose to change some parameters in this device, such as doping concentration, thickness and electrode materials.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.301-305
• /
• 2008

유기 발광 다이오드(Organic light-emitting diode, OLED)는 저전력 구동, 자체발광, 넓은 시야각, 우수한 고해상도, 풀 칼라, 높은 재현성, 빠른 응답속도, 간편한 제조 공정 등의 장점을 가지고 있으나, 고성능 디스플레이로서 실용화하기 위해서는 아직도 해결되어야 할 과제가 많다. 소자의 저소비전력, 제조공정의 안정성, 대형 기판기술, 봉지 기술, 소자의 수명, 풀 컬러화를 위한 적색, 청색, 발광소자의 고휘도 등이 시급하다. 무엇보다 중요한 것은 유기 발광 소자의 효율을 향상시키는 것이 상용화를 위한 키(key) 이다. 이를 위해서 유기 발광 소자의 구조 개선과 새로운 유기 물질 적용을 통해 구동전압을 낮춤으로써 효율을 향상시킬 수 있다. 따라서 본 연구에서는 유기 발광 소자의 효율을 향상시킬 목적으로 ITO/TPD/Znq2+DCJTB/Znq2/Al의 구조와 ITO/CuPc/N PB/Alq3+DCJTB/Alq3/Al의 구조를 가지는 소자의 발광층에 형광염료를 도포한 적색 발광 소자를 제작하고, 그 전기적 및 광학적인 특성을 평가하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.121-124
• /
• 2000

Achieving red light-emitting diodes with high quantum and luminous efficiency is required to fabricate the full-color organic electroluminescence display. In this work, we report that devices with 2.3,7,8,12,13,17,18-Octaethyl-21H,23H-porphine palladium (II) (PdOEP), doped into tris(8-Hydroxyquinolinato)-aluminum (III) (Alq3) show a narrow deep red emission (670nm). In addition, PdOEP has been used as host material in which red dyes such as 4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) doped in order to fabricate efficient red-emitting diodes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.31-32
• /
• 2008

The structure of OLEDs with conventional heterostructure consists of anode, hole injection layer, hole transport layer, light-emitting layer, electron transport layer, electron injection layer, and cathode. NPB used as a hole transport layer and DPVBi used as a blue light emitting layer were graded-mixed at selected ratio. Interface at heterojunction between the hole transport layer and the elecrtron transport layer restricts device's stability. Mixing of the hole transport layerand the emitting layer removes abrupt interface between the hole transport. layer and the electron transport layer. The stability of OLED with graded mixed-layer developed in this study was improved.