• The Korean Journal of Ecology
• /
• 제21권4호
• /
• pp.329-335
• /
• 1998

The growth of Phytolacca L. grown under three light regimes at three nutrient concentrations was analyzed. The effect of shading treatment on plnat growth was greater than that of nutrient treatment. Plant dry mass increased more than 5-fold during 21 days under 33% and 100% irradiances, whereas that was strongly reduced under 8% irradiance. Net assimilation rate decreased with plant growth irrespective of light and nutrient treatments, though the highest net assimilation rate was shown under 100% irradiance. Under 33% irradiance leaf area in plants supplied with nutrient solution increased to such extent as to compensate reduction in net assimilation rate, whic maintains almost identical growth rate with that under 100% irradiance. The relatonship between total plant nitrogen and leaf nitrogen content was dependent on the growth irradiance. Moreover, leaf nitrogen and specific leaf weight were also changed depending on the light and nutrient conditions. Based on these findings, it is suggested that the adaptive characteristics of Pokeberry plant to light and nutrient conditions may contribute to rapid extension of Pokeberry habital in Korea rocently.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.40-42
• /
• 1999

In this paper, light-weight system of linear induction motor(LIM) for light railway train is presented, and is compared with former type of LIM. For the light-weight system without modification of motor size the material of primary core(silicon steel) is changed with iron-cobalt alloy and the material of primary winding(copper) is changed with aluminium. The characteristics of LIM are analyzed. Specially, the air gap magnetic flux density distribution due to end effect is showed with motor velocity, we will present papers continuously through designing and testing a trial product.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1723-1726
• /
• 2008

In recent years, there has been a remarkable progress in the development of the fiber optic sensors for the detection of various chemicals. Fiber optic sensors have the advantages of very small size, flexibility and low cost. The fiber optic sensors employing different optical or spectroscopic phenomena have been reported such as bulk absorption, optical reflectance, fluoresces and energy transfer. In this study, the effect of nanoparticle concentration in liquid upon light absorption and scattering was studied using extrinsic fiber optic method. For the evaluation, we used Red (650 nm) and Blue (430 nm) light sources which are coupled through the standard cuvette using optical fiber to detector. The experiments are carried out with Polystyrene latex (400 - 800 nm), and Silicon (35 - 110 nm) nanoparticles suspended in Isopropanol. Differences in light absorption and scattering depending on nanoparticle concentration and type are discussed. This method may be useful to study nanoparticles properties for various application and research.

• Journal of Nutrition and Health
• /
• 제8권2호
• /
• pp.27-30
• /
• 1975

This investigation was designed to determine the influence of light on the changes of capsaicin, carotenoid and sugar in hot green pepper fruits during the after-ripening period. The results were as follows; 1. In capsaicin content, the sample in light was increased about twice of that of the sample under the darkness. 2. In total carotenoid content, both samples were increased in the same trend. And so, it might be able to assume that carotenoid pigments were produced without the light. 3. In sugar content, the sample in light was more rapidly decreased than that of the sample in darkness.

• Journal of Biosystems Engineering
• /
• 제31권5호
• /
• pp.449-453
• /
• 2006

Effect of light quality on plant temperatures at joining parts of grafted watermelon seedlings was investigated using a thermal imaging system in this study. Plant temperatures at joining parts lowered than those at stem region during graft-taking. However, difference in plant temperatures at joining parts and at stem region decreased by days after graft-taking. Plant temperatures of grafted seedlings graft-taken under white, blue, red, and blue + red fluorescent lamps repeatedly fluctuated high at photoperiod and low at dark period. Considering the variation of plant temperatures at joining pa퍼5, the illumination of blue and red light as well as white light will be effective for grafting of grafted watermelon seedlings. It is recommended that air temperature around grafted seedlings should be maintained at 27 to $29^{\circ}C$ for enhancing the physiological reaction of callus and for the smooth joining of scion and rootstock.

• 보존과학회지
• /
• 제36권4호
• /
• pp.236-243
• /
• 2020

In this study, an accelerated aging experiment for fabric and paper was conducted using two light emitting diode(LED) sources with different wavelength characteristics, and the discoloration under each lighting type was examined. Hanji(Korean traditional paper) and related textiles showed more discoloration under blue LEDs, while the blue wool standard showed more discoloration under white LEDs. This, indicated that the deterioration varied depending on the sample color. The the effect of the light source on artifact deterioration was primarily related to the total radiation flux(expressed in mill watts), rather than the total luminous flux(expressed in lumens). In addition, the discoloration of the investigated artifacts was dependent on the color rendering of the lighting.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.17-18
• /
• 2018

With the technological advancement of the construction industry, construction materials with future direction appeared. In Korea, LEFC(Light Emotion Friendly Concrete) has been developed and studied, which has improved labor productivity and economic efficiency over semi-transparent concrete by introducing transparent plastic rods into concrete matrix. However, there is a problem in that the bending performance is lowered according to the insertion of the rod and the bending performance is different according to the light transmission direction. In this study, the incorporation of PVA fibers in the direction of light transmission was increased and the change of flexural performance according to the interval of light transmission was examined.

• Journal of Plant Biology
• /
• 제37권3호
• /
• pp.285-292
• /
• 1994

Ultrastructural changes in Panax ginseng C. A. Meyer mesophyll chloroplasts and variation of thylakoid membrane protein in responce to the light intensity were studied in leaves of two-y-old plants exposed to two different light intensities under field coditions. The leaves were allowed to function for three months after emergence under two contrasting light conditions. The ginseng chloroplasts of 5% light were filled with highly stacked grana of condensely arrayed thylakoids, so that the stroma space was hardly observed. In contrast, chloroplasts from leaves at 100% sunlight had fewer thylakoid membranes and smaller grana stacks. The number of osmiophilic globules increased. Total Chl content and Chl b content were lower at 100% sunlight than 5% sunlight. The thylakoid membrane proteins in the leaves grown at 100% sunlight showed lower CPIa, LHCII and CP29 than those with 5% sunlight. This effect was most obvious for LHCII. Polypeptides showed major bands at 90, 64, 29-30, 22 and 14 kD, and minor bands at 59, 58, 54, 52, 49, 46, 44, 35, 23, 21 and 18-19 kD. All these bands were lower in intensity in the leaves exposed to 100% sunlight. Moreover, the bands at 58-59, 46-47 and 23 kD disappeared.

• 대한기계학회논문집A
• /
• 제28권1호
• /
• pp.79-84
• /
• 2004

A light-guide is one of several important components of backlight unit in TFT-LCD. The manufacturing technology and optical system design of the light guide is very sensitive to quality and cost of the TFT-LCD module. In the present study a new manufacturing method which is called as direct surface forming(DSF) has been tested under various conditions. DSF is very similar to the well-known hot embossing except for partial contact between mold and substrate. The final V-groove pattern shows different shapes depend on the temperature of mold surface, contact time of mold and depth of V-groove.

• 한국세라믹학회지
• /
• 제54권6호
• /
• pp.449-469
• /
• 2017

The development of quantum dots (QDs) has had a significant impact on various applications, such as solar cells, field-effect transistors, and light-emitting diodes (LEDs). Through successful engineering of the core/shell heterostructure of QDs, their photoluminescence (PL) quantum yield (QY) and stability have been dramatically enhanced. Such high-quality QDs have been regarded as key fluorescent materials in realizing next-generation display devices. Particularly, electrically driven (or electroluminescent, EL) QD light-emitting diodes (QLED) have been highlighted as an alternative to organic light-emitting diodes (OLED), mostly owing to their unbeatably high color purity. Structural optimizations in QD material as well as QLED architecture have led to substantial improvements of device performance, especially during the past decade. In this review article, we discuss QDs with various semiconductor compositions and describe the mechanisms behind the operation of QDs and QLEDs and the primary strategies for improving their PL and EL performances.