• 원예과학기술지
• /
• 제34권1호
• /
• pp.55-66
• /
• 2016

This study was carried out to investigate the effect of artificial light sources with different light qualities on the growth and flowering characteristics of a herbaceous long-day plant, Petunia ${\times}$ hybrida Hort. Seedlings of petunia cultivar 'Madness Rose' were potted, acclimated for one week, and grown in a phytotron equipped with tube- and bulb-type fluorescent lamps (FL tube and bulb), tube-type white light-emitting diodes (LED tube), halogen lamps (HL), metal halide lamps (MH), and high pressure sodium lamps (HPS) for 10 weeks. The temperature, photoperiod, and photosynthetic photon flux density (PPFD) in the phytotron were $22{\pm}2^{\circ}C$, 16 h, and $25{\pm}2{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. Light sources combined with HL promoted stem elongation, and plant height and internode length decreased with increasing red to far-red (R:FR) ratio. FL tube + LED tube, HPS, and FL tube promoted branching, whereas plants grown under light sources combined with HL did not have any branches. Days to flowering (from longest to shortest) occurred as follows: FL tube + HL > FL tube + HL > MH > HPS = FL tube + FL bulb > FL tube + LED tube > LED tube > FL tube, indicating that reducing the R:FR ratio of the light sources promoted flowering. Only 20% of plants grown under an FL tube flowered, whereas under all other treatments, 100% of plants flowered. At 10 weeks after treatment, plants grown under HPS and MH had (cumulatively) 12 open flowers, and those grown under FL tube + FL bulb, LED tube, FL tube + LED tube, and HPS treatment had approximately seven flower buds. These results suggest that light sources with low R:FR ratios promote flowering and stem elongation in petunia, but they reduce its ornamental value due to overgrowth and poor branching.

• 대한금속재료학회지
• /
• 제49권9호
• /
• pp.732-738
• /
• 2011

Silicon oxide thin films were deposited by using a plasma-enhanced chemical-vapor deposition technique to investigate the light emission properties. The photoluminescence characteristics were divided into two categories along the relative ratio of the flow rates of $SiH_4$ and $N_2O$ source gases, which show light emission in the broad/visible range and a light emission peak at 380 nm. We attribute the broad/visible light emission and the light emission peak to the quantum confinement effect of nanocrystalline silicon and the Si=O defects, respectively. Changes in the photoluminescence spectra were observed after the post-annealing processes. The photoluminescence spectra of the broad light emission in the visible range shifted to the long wavelength and were saturated above an annealing temperature of $900^{\circ}C$ or after 1 hour annealing at $970^{\circ}C$. However, the position of the light emission peak at 380 nm did not change at all after the post-annealing processes. The light emission intensities at 380 nm initially increased, and decreased at annealing temperatures above $700^{\circ}C$ or after 1 hour annealing at $700^{\circ}C$. The photoluminescence behaviors after the annealing processes can be explained bythe size change of the nanocrystalline silicon and the density change of Si=O defect in the films, respectively. These results support the possibility of using a silicon-based light source for Si-optoelectronic integrated circuits and/or display devices.

• 한국컴퓨터그래픽스학회논문지
• /
• 제16권1호
• /
• pp.9-20
• /
• 2010

3차원 공간에 존재하는 반투명 물질을 물리 기반으로 렌더링하기 위해서 빛의 진행 경로를 작은 구간으로 나눈 후, 각 구간에 대하여 빛의 직접적인 영향, 산란으로 인한 영향, 반투명 물질안에서의 소멸 및 물질의 발광으로 인한 영향 등을 고려한 빛의 에너지를 계산하여 누적하는 방식을 사용한다. 이중 빛의 산란은 연속 공간에서 매우 복잡한 방식으로 작용하기 때문에 이의 시뮬레이션을 위해서 상당한 노력이 필요하다. 빛의 산란을 효과적으로 계산하기 위해 여러근사 방법들이 고안되었는데, 그중 볼륨 포톤매핑 기법은 빛이 간섭매체 내부에서 산란되는 효과를 단순화된 시뮬레이션으로 미리 계산하여두고 이를 검색해 효율적으로 렌더링 하는 방법을 사용한다. 이 방법은 주변에서 검색한 시뮬레이션 정보를 이용하기 위해서 밀도추정방법을 적용하는데, 시뮬레이션자료의분포에 따라서 검색에 따른 편차가 있을 수 있게된다. 또한 시뮬레이션된 자료만을 이용하여 산란효과를 반영하기 때문에 고밀도이지만 시뮬레이션이 충분하지 못한 위치에 대해서 방향성 있는 위상함수에 대한 특징을 잘 표현하지 못한다는 문제가있다. 이러한 문제를해결하고자 하는 노력의 일환으로, 본 논문에서는 입자형태로 시뮬레이션된 볼륨데이터에 대해 밀도추정방법의 하나인 커널스무딩을 이용하여 표현한 산란효과를 반투명물질 자료구조에 저장하고 이를 복원하는 방법을 제안하고, 실험결과 분석을 통하여 장단점을 분석한다.

• Journal of the Optical Society of Korea
• /
• 제7권4호
• /
• pp.211-215
• /
• 2003

Statistical characteristics of the backscattered light from turbid tissues obtained by polarizationsensitive optical coherence tomography are investigated. The amplitude of the backscattered light is found to faithfully follow the Rayleigh distribution predicted by the scattering theory of electromagnetic waves in random media. The probability density function of the phase difference between the two orthogonal polarization components of the backscattered light is explicitly derived and then verified in comparison with the experimental data measured from in-vitro tissues of porcine ligament.

• 로봇학회논문지
• /
• 제11권1호
• /
• pp.19-25
• /
• 2016

In this paper, we propose a new method for improving the accuracy of localizing a robot to find the position of a robot in indoor environment. The proposed method uses visible light for indoor localization with a reference receiver to estimate optical power of individual LED in order to reduce localization errors which are caused by aging of LED components and different optical power for each individual LED, etc. We evaluate the performance of the proposed method by comparing it with the performance of traditional model. In several simulations, probability density functions and cumulative distribution functions of localization errors are also obtained. Results indicate that the proposed method is able to reduce localization errors from 7.3 cm to 1.6 cm with a precision of 95%.

• 한국균학회지
• /
• 제20권1호
• /
• pp.51-57
• /
• 1992

Mitochondria in Pleurotus ostreatus were isolated and purified by stepped sucrose density gradient centrifugation, to compare the effects of organic compound on the activities of mitochondrial ATPase in Basidiomycotina with those in mammalian cell. The effects of N, N'-dicycio-hexylcarbodiimide (DCCD), carbonyl cyanide m-chlorophenylhydrazone (CCCP), sodium azide and aurovertin known as compounds to be related to electron transfer system in mitochondria were studied. A activity of mitochondrial ATPase was inhibited by 64%, 57% and 53% in the presence of 0.25 mM DCCD, 0.02 mM sodium azide and 1.5 $({\mu}g/mg\;of\;protein)$ aurovertin B, respectively. It was stimulated by 22% in the presence of 0.15 ${\mu}M$ CCCP.

• 한국멀티미디어학회논문지
• /
• 제10권6호
• /
• pp.779-785
• /
• 2007

This paper introduces a kind of new ink hue analysis system (HAS) based on the model-distinguishing technology and briefly casts light on the principle of the analysis. Also, it stresses the hardware structure, the software designing methods and programming procedure of the HAS as well as its interface. And the simulation result of the experiment data was given. The study shows that this kind of system can help to improve the color arrangements and managements of ink. The accuracy has reached ${\pm}0.5%$ compared with high precision density meter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1007-1010
• /
• 2003

We made use of $Alq_3$ which is the representative light-emitting material. Electric conduction mechanism and luminance characteristics were analyzed in this paper. We have also measured current density-thickness-voltage characteristics with thickness variation from 60 to 400nm. we analyzed the low electric and the high electric field in theoretically. Also, maximum luminous efficiency is the thickness 200 nm of $Alq_3$ in luminous-thickness characteristics.

• 한국수산과학회지
• /
• 제28권6호
• /
• pp.805-811
• /
• 1995

Final biomass yields (peak optical density) and growth rates (divisions/day) of seven clones of Skeletonema costatum from Korean coastal waters were measured to understand their intraspecific variations in the light intensity niche component under $25^{\circ}C$ condition. Daily growth rates of 6 of 7 S. costatum, clones were maximum at 6000 lux while that of YS4, a neritic clone, was maximum at 9000 lux. The final biomass yields of 4 of the 7 S. costatum clones were maximum at the lowest light intensity of 2000 lux. Minimum final biomass yields were found at 9000 lux in all the S. costatum clones other than an estuarine clone, HDC9. The intraspecific variations of the mean growth rate and mean final biomass yield under each of the three different light intensity in terms of the coefficient of variation were not greater than 10% in any of the 7 S. costatum clones.

• Applied Science and Convergence Technology
• /
• 제27권2호
• /
• pp.42-45
• /
• 2018

Photovoltaic and optoelectronic devices based on hybrid metal halide perovskites ($MAPbX_3$; $MA=CH_3NH_3{^+}$, $X=Cl^-$, $Br^-$, or $I^-$) are rapidly improving in power conversion efficiency. Also, during recent years, perovskite single crystals have emerged as promising materials for high-efficiency photovoltaic and optoelectronic devices because of their low defect density. Here we show that the light soaking effect of mixed halide perovskite ($MAPbBr_{3-x}I_x$) single crystals can be explained using photoluminescence, time-resolved photoluminescence, and Raman scattering measurements. Unlike Br-based single crystal, Br/I mixed single crystal show a strong light soaking effect under laser irradiation condition that was related to the existence of multiple phases.