• 대한수학회지
• /
• 제57권3호
• /
• pp.793-807
• /
• 2020

Stable range of rings is a unifying concept for problems related to the substitution and cancellation of modules. The newly appeared element-wise setting for the simplest case of stable range one is tempting to study the lifting property modulo ideals. We study the lifting of elements having (idempotent) stable range one from a quotient of a ring R modulo a two-sided ideal I by providing several examples and investigating the relations with other lifting properties, including lifting idempotents, lifting units, and lifting of von Neumann regular elements. In the case where the ring R is a left or a right duo ring, we show that stable range one elements lift modulo every two-sided ideal if and only if R is a ring with stable range one. Under a mild assumption, we further prove that the lifting of elements having idempotent stable range one implies the lifting of von Neumann regular elements.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.858-864
• /
• 2019

The increasing demands of lifting lugs can be attributed to the rapid advancement of shipbuilding and offshore-structure production technologies and an exponential increase in the size of the block units of ship structures. Therefore, to ensure safety during the transportation and turnover of large blocks, it is important to determine the structural integrity and position of lifting lugs. However, because the manufacturing cost and availability of lugs are important considerations, low cost and easily obtainable steel compositions of grades different from those of the blocks are often used as alternatives. The purpose of this study is to investigate the effect of a lifting-lug metal on the physical properties of a base metal in a dissimilar welding between the base metal and lifting lug. The effect was evaluated by observing the metal microstructures and determining the hardness and dilution values on the cross-sectional surface of the lifting lug. According to the results of the metal microstructures, impact, hardness, and emission spectrochemical analysis at the surface from where the lug was removed confirmed that the chemical composition of the lifting-lug metal did not influence the physical properties of the base metal.

• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.263-269
• /
• 2003

이 논문은 3차원 정수 웨이브릿 변환을 이용한 손실 의료 영상 압축에 대한 방법을 보여준다. 의료영상에 3차원 웨이브릿 분할법과 3차원 spatial dependence tree를 이용한 Set Partitioning in Hierarchical Trees(SPIHT) algorithm을 제공한다. 또한 3차원 웨이브릿 분할법에서 정수 웨이브릿 필터들을 이용한 lifting방법을 이용하고, unitary 변환을 만들기 위하여 정확한 scaling을 이용한다. 압축률이 증가하면 할수록 인접한 coding unit사이에선 boundary effect가 생긴다. Video와 같지 않아서 인접한 coding unit사이에서의 boundary artifact는 보여서는 안 된다. 이러한 현상을 제거하기 위해서 인접한 coding unit사이에 axial domain으로 overlapping방법을 사용한다. 또한 코딩 할 때 여러 종류의 정수 필터들을 사용한다. 결과로 어떤 특정한 필터를 사용할 때 좋은 결과를 얻었고 overlapping방법을 사용했기 때문에 ringing artifacts는 거의 찾아 볼 수가 없게 되었다. 그리고 어두운 면을 코딩 할 때도 좋은 결과를 얻었다.

• 대한전자공학회논문지SD
• /
• 제41권8호
• /
• pp.75-84
• /
• 2004

본 논문에서는 Motion JPEG2000 등의 이산 웨이블릿 기반의 고속 영상처리를 위해서 리프팅 방식의 효율적인 H/W 구조를 제안하였다. 리프팅 내부연산의 반복성을 이용하여 알고리즘 레벨에서 구조적인 사상을 적용하고 데이터 스케줄링을 이용하여 최적화되고 간략화된 리프팅 기반의 필터링 셀의 구조를 제안한다. 이를 바탕으로 (9,7) 및 (5,3) 필터를 모두 수용할 수 있는 리프팅 커널의 구조를 구현하였다. 제안된 리프팅 커널은 일정 대기지연 시간 후에 연속적으로 데이터를 출력할 수 있는 간략화된 구조를 갖고 있다. 시간적인 순서로 입력되는 데이터에 대해서 일정한 출력을 발생할 수 있기 때문에 단순히 H/W를 추가하면 병렬적인 동작을 통해서 높은 출력율을 간단히 얻을 수 있다. 본 논문에서 제안된 리프팅 커널은 ASIC 및 FPGA 환경으로 모두 구현하였는데, ASIC으로는 삼성전자의 0.35㎛ CMOS 라이브러리를 이용하여 구현하였고 FPGA은 Altera사의 APEX을 타겟으로 하였다. ASIC의 경우 리프팅 연산을 위해 41,592개의 게이트 수와 라인 버퍼링을 위한 128Kbit의 메모리를 사용하였으며, FPGA의 경우 6,520개의 LE(Logic Element)와 128개의 ESB(Embedded System Block)을 사용하였다. 각각의 경우에 대해서 125MHz와 52MHz의 속도에서 안정적으로 동작할 수 있었다.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.36-41
• /
• 2006

This study was carried out to install the lifting force of a two hinge type stand mechanism by 6 Sigma process in advance. This unit is designed for the display device in order to enhance the ergonomics for effective height adjustment and maintenance at any preferred position. The unit will be very useful for the mechanism fabricated with coil springs and disc springs as a torque generator. The 6 Sigma process was applied to select two key factors among 7 elements to lift the head unit and to find out applicable tolerance securing the 3.4 ppm of defects as well as what deviation of lifting force we can expect between calculation and experiment at the design stage of development. The result of this study can be applied to various units for the optimization of the smooth lift.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제42권5호
• /
• pp.278-283
• /
• 2016

Objectives: The maxillary sinus mucosa is reported to recover to preoperative sterility after sinus floor elevation. However, when drainage of maxillary sinus is impaired, recovery can be delayed and maxillary sinusitis can occur. Therefore, in this study, we investigated the correlations between anatomic variants that can interrupt the ostium of the maxillary sinus and incidence of complication after sinus lifting. Materials and Methods: The subjects are 81 patients who underwent sinus lifting in Wonkwang University Dental Hospital (Iksan, Korea). Computed tomography (CT) images of the subjects were reviewed for presence of nasal septum deviation, anatomic variants of the middle turbinate, and Haller cells. Correlations between anatomic variations and occurrence of maxillary sinusitis were statistically analyzed. Results: Patients with anatomic variants of ostio-meatal units, such as deviated nasal septum, concha bullosa or paradoxical curvature of the middle turbinate, or Haller cells, showed a higher rate of complication. However, only presence of Haller cell showed statistically significant. Conclusion: Before sinus lifting, CT images are recommended to detect anatomic variants of the ostio-meatal complex. If disadvantageous anatomic variants are detected, the use of nasal decongestants should be considered to reduce the risk of postoperative sinusitis.

• 대한수학회보
• /
• 제55권4호
• /
• pp.1037-1049
• /
• 2018

In this paper, we have first presented the construction of the linear characters of a finite Coxeter group $G_n$ of type $B_n$ by lifting all linear characters of the quotient group $G_n/[G_n,G_n]$ of the commutator subgroup $[G_n,G_n]$. Also we show that the sets of distinguished coset representatives $D_A$ and $D_{A^{\prime}}$ for any two signed compositions A, A' of n which are $G_n$-conjugate to each other and for each conjugate class ${\mathcal{C}}_{\lambda}$ of $G_n$, where ${\lambda}{\in}\mathcal{BP}(n)$, the equality ${\mid}{\mathcal{C}}_{\lambda}{\cap}D_A{\mid}={\mid}{\mathcal{C}}_{\lambda}{\cap}D_{A^{\prime}}{\mid}$ holds. Finally, we have given the general structure of units of Mantaci-Reutenauer algebra.

• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.458-463
• /
• 2011

A CHS(Container Handling System) is a system to load and to unload ISO 2000 or ISO 4000 standard containers which is widely used for various industrial transport purpose. A new light type of CHS is introduced in this paper, in order to reduce weight of cargos and to give the convenience in cargo loading and unloading without additional lifting equipments. The structural models of this system are created to assemble the smooth integration of system and to interface the each composing units with the specification of truck chassis to be mounted. These models are applied to find the suitable design parameters under the condition of force restrictions of each units. Finally, the stability of this system are investigated by analyzing the dynamic simulation using Visual NASTRAN 4D, and it could be recommend the good design parameters for the manufacturing purpose.

• 반도체디스플레이기술학회지
• /
• 제5권2호
• /
• pp.19-25
• /
• 2006

This paper focuses on lossy medical image compression methods for medical images that operate on three-dimensional(3-D) irreversible integer wavelet transform. We offer an application of unbalanced tree structure algorithm to medical images, using a 3-D unbalanced wavelet decomposition and a 3-D unbalanced spatial dependence tree. The wavelet decomposition is accomplished with integer wavelet filters implemented with the lifting method. We have tested our encoder on volumetric medical images using different integer filters and coding unit sizes. The coding unit sizes of 16 slices save considerable dynamic memory(RAM) and coding delay from full sequence coding units used in previous works. If we allow the formation of trees of different lengths, then we can accomodate more transaxial scales than three. The encoder and decoder can then keep track of the length of the tree in which each pixel resides through the sequence of decompositions. Results show that, even with these small coding units, our algorithm with certain filters performs as well and better in lossy coding than previous coding systems using 3-D integer unbalanced wavelet transforms on volumetric medical images.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.300-303
• /
• 2006

The rotor blade of a helicopter is the key structural units and provides three components such as vertical lifting force, horizontal propulsive force and control force. With advancements in aerospace technology, composite materials have been widely used in lightweight structures. In addition, composites show great potential on the design of rotor blades due to the advantages of strength, durability and weight of the materials. In the operational condition of a helicopter, it is required the vibration characteristics of the rotating blades for avoiding resonance and analysis of efficient performance prediction et al. In this study, the CAMRAD-II is used for analyzing the vibration characteristics of rotating composite blades. The effects of rotating speed and collective angles are investigated. Also, the numerical results are compared with experimental data.