• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.3
• /
• pp.148-156
• /
• 2015

Deck plates of ships or offshore structures would make out-of-plane distortion for their thin thickness. These distortions are usually straightened by thermal straightening such as flame heating method. After thermal straightening, the blocks are lifted and moved by cranes to assemble it at dry-dock stage. After this lifting process, out-of-plane deformation again happens frequently. And then, they continuously cause quality and accuracy problems in the final dry-dock process. So, it takes more time for repair and correction working. According to preceding research, the lifting process by cranes would offset the effect on thermal straightening. The target of this study is to develop a methodology analyzing the remaining efficiency of thermal straightening after block lifting. The development was based on the assumption of yield state at straightening region. Therefore the remaining efficiency was obtained by different stiffness slope while lifting & relieving. The efficiency formula was designed using inherent strain, and we made a table of zero-efficiency by cooling speed and class rule's steels. As a result, if the stress orthogonal to straightened line is calculated during lifting analysis by FEA, the efficiency can be obtained linearly to the values in the table. Finally, even optimized carling position can be designed by considering the regional data from series project and welding region on deck.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.209-213
• /
• 1997

Manual lifting techniques are commonly defined in terms of the postures adopted at the start of the lift. Quantitative definition is problematic, however, because the absolute joint angles adopted to lift an object are influenced by task parameters, such as the initial height of the load. The main objective of this study is to investigate the grip strength of the both hands at the initial lifting points. The survey is conducted by measuring the compression force, anthropometric data and grip strength at the lifting postures for the subjects(n=50) who is assigned to their job as usual. The experiment is peformed at the four lifting postures which involving the combination of two horizontal factors(H1 : 35 cm, H2 : 55 cm) and two vertical factors(V1 : 20~80 cm, V2 : 47~102 cm). The analysis result of lifting posture indicated that each H1-V1, H2-V1 combinations are about 60$^{\circ}$ and each H1-V2, H2-V2 combinations are about $30^{\circ}$. There are significant differences on grip strength between $60^{\circ}$ and $30^{\circ}$ stooped posture. The results of this study can be provided a method defining lifting postures at the minimum grip strength. Also, it is eliminated a hazard of the injuries which are cumulative trauma disorders(CTDs) and back pain, increased a productivity and improved a welfare of workers.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.89-93
• /
• 2009

The muscular-skeletal disorders that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. This study used the psychophysical approach to determine the maximum acceptable weight(MAWL) for seven young male subjects, and used isometric and isoinertial strength variables as predictors to develop prediction models. Also, the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWL. Three different lifting frequencies(1, 3, 5lifts/min) with two lifting range from floor to knuckle height and knuckle to shoulder height for one hour's work shift using free style lifting technique were studied. These results may not only provide scientific data in establishing the safety standards for Korean workers' lifting tasks, but also contribute preventing the rapidly increasing muscular-skeletal disorders lately on the industrial site.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.1
• /
• pp.1-10
• /
• 2010

Recently, a shipyard is making every effort to efficiently manage equipments of resources such as a gantry crane, transporter, and so on. So far block lifting scheduling of a gantry crane has been manually performed by a manager of the shipyard, and thus it took much time to get scheduling results and moreover the quality of them was not optimal. To improve this, a block lifting scheduling system of the gantry crane using optimization techniques was developed in this study. First, a block lifting scheduling problem was mathematically formulated as a multi-objective optimization problem, considering the minimization of travel distance at an idle state and wire replacement during block lifting. Then, to solve the problem, a meta-heuristic optimization algorithm based on the genetic algorithm was proposed. To evaluate the efficiency and applicability of the developed system, it was applied to an actual block lifting scheduling problem of the shipyard. The result shows that blocks can be efficiently lifted by the gantry crane using the developed system, compared to manual scheduling by a manager.

• Physical Therapy Korea
• /
• v.16 no.3
• /
• pp.16-23
• /
• 2009

The purpose of this study was to investigate the effects of a repetitive lifting task on the level of activation and median frequency of the paraspinal muscles, and to provide basic data of the maximal acceptable duration of the lifting task to avoid muscle fatigue. Ten healthy male subjects were recruited as participants and they repetitively (12 lifts/min) lifted a box ($46cm{\times}30cm{\times}30cm$, 15 kg) for 10 minutes. Electromyographic data (muscle activation and median frequency), heart rate, and Borg CR10 score were recorded at 1, 3, 5, 7, and 9 minutes after the lifting task. Electromyographic data was recorded from the elector spinalis, mutifidus, external oblique abdominis, and rectus abdominis for 1 minute. The results showed that as the repetitive lifting task progressed, the heart rate and Borg CR10 score significantly increased. In addition, activation of the muscles increased. The median frequency significantly decreased over time in the elector spinalis, mutifidus, and external oblique abdominis (right side), except for the external oblique abdominis (left side) and rectus abdominis. It is suggested that the median frequency recorded from a dynamic task is used to monitor muscle fatigue. Furthermore, the repetitive lifting task (15 kg, 12 lifts/min) should not continue for more than 3 minutes in order to avoid muscle fatigue.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.179-184
• /
• 2003

This study focuses on an analytical approach to calculate crane lifting forces for a sunken ship in consideration oj elongation of crane ropes. The method takes into account the relation of lifting forces acting in wire rope slings to the inclination of the ship's hull including the effect of lug positions. For lifting analysis, the Euler angles are defined to represent the inclination of a sunken ship in developing the static force and moment equations. An additional compatability condition is introduced in order to solve an indeterminate lifting analysis problem with 4 cranes and a set of lifting forces along the 4 crane ropes is calculated. A 3-dimensional example of the G/T 1500 oil tanker is analyzed and the results show that the information obtained by the method could be useful to engineers to conduct salvage work.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3680-3684
• /
• 2015

A deck crane is installed on the deck of a ship by lifting method using tower crane or floating crane. The safety assessment for two points lifting method should be preceded to ensure a safe installation of deck crane. In this study, finite element models of deck crane and fixing jig are generated for the structural analysis which can evaluate a safety of lifting method. Also, reaction forces and boundary conditions considering lifting state are applied to the structural analysis. The proposed safety assessment method can be useful as an analytic tool that can provide a safer procedure for installation of deck crane by lifting method.

• Archives of Plastic Surgery
• /
• v.46 no.2
• /
• pp.147-151
• /
• 2019

Background Successful aesthetic plastic surgery is devoid of both unsightly scarring and postoperative disfigurement. Patients undergoing midface-lifting surgery are very often disconcerted by an altered side hairline, including sideburns, despite considerable amelioration of facial wrinkles. This study was conducted to identify an effective means of approaching an altered hairline and the unavoidable scarring arising from midface-lifting surgery. Methods A total of 37 patients who underwent corrective surgery with hair transplantation for hair loss or scar deformity arising from midface-lifting surgery from June 2014 to June 2017, and were observed for more than 6 months thereafter, were enrolled in the study. Prior to corrective surgery, the patients were administered a multiple-choice survey regarding their dissatisfaction arising from midface-lifting surgery. Among the 37 patients, 24, 12, and one underwent donor harvesting by the strip method, non-shaven follicular unit extraction, and partial shaving follicular unit extraction, respectively. Additionally, 33 of the 37 patients underwent hair transplantation in the frontotemporal recess area along with hairline correction surgery. The average number of transplanted grafts was 1,025. Results Surgery resulted in a natural and satisfactory appearance in all patients. The average patient and physician subjective satisfaction scores were 4.6 and 4.8, respectively. No adverse events such as folliculitis occurred. Conclusions Side-hairline correction surgery by hair transplantation can be considered an effective method of realigning an altered hairline accompanied by scars following midface-lifting surgery.

• PNF and Movement
• /
• v.10 no.4
• /
• pp.49-55
• /
• 2012

Purpose : The purpose of this study was to assess the effects of bridging exercise and combined lifting pattern bridging exercise on the lower extremity muscle activity. Methods : Twenty-five healthy adults volunteered to participate in this study. Subjects were required to complete following bridging exercises. Muscle activity was measured by QEMG-4 system(LXM 3204, Laxtha Korea). A paired t test was used to determine the influence of muscle activity for each exercise and descriptive statistics was used to characteristics of the subjects. Results : The biceps femoris, tibialis anterior, gastrocnemius of combined lifting pattern bridging exercise showed significance excepted vastus medialis(p<.05). In the case of men, biceps femoris showed significance in the combined lifting pattern bridging exercise(p<.05). In the case of women, biceps femoris and tibialis anterior showed significance in the combined lifting pattern bridging exercise(p<.05). Conclusion : The combined lifting pattern bridging exercise was more increased than bridging in lower extremity muscle activation. This result will be used for knee joint stabilizing exercises and biceps femoris strength training.

• Journal of Korean Medical classics
• /
• v.29 no.2
• /
• pp.135-150
• /
• 2016

Objectives : KangHaiChengZhiLun (亢害承制論; If Excess Brings Harm, Lifing Qi (承氣) Restrains) was originally a theory that explained how the realms of nature remain in harmony and equilibrium. It later became an important theory for clinical trials of Traditional Chinese Medicine, explaining the physiological and pathological mechanism. Methods : The researcher considered all the annotations and the original text of SuWen(素問), LiuWeiZhiDaLun(六微旨大論) and theories of medical practitioners who applied KangHaiChengZhiLun(亢害承制論) to their clinical trials. Results & Conclusions : Wangbing (王氷) went with a theory that phenomena of Lifting Qi (承氣) take place in the realms of nature when Qi (氣) flourishes. In XinJiaoZheng(新校正), he wrote about two theories: one was that Six Kinds of Natural Factors (六氣) first work as the main Qi (本氣) but later bring about Lifting Qi. (終見下承之氣說); the other was that excessive Stagnation Qi (鬱氣) can be exploded and invite another accompanying Qi, Lifting Qi. (甚者兼其下承之氣說) Liuwansu (劉完素) had a theory that if Six Kinds of Natural Factors go disproportionately excessive, it becomes accompanied by imaginary Qi (假象) that conquers self. (反兼勝己之化說) $Wangl{\ddot{u}}$(王履) maintained that Lifting Qi usually works as a means to prevent Six Kinds of Natural Factors (六氣) from becoming rampant; but when Six Kinds of Natural Factors become overly excessive, Lifting Qi restrains them in order to maintain equilibrium. (防之與克勝說) Yutuan explained that since Excessive Qi (亢氣) does damage to the mother of Lifting Qi, Lifting Qi restrains Excessive Qi to protect Original Qi (元氣), its mother. (護救承者之元氣說) Gongtingxian was in favor of two theories: one argued that causes and symptoms of a disease differ from each other. (體用不同說); the other said that diseases are naturally cured if the patient finds out the time when Lifting Qi gains strength. (得承之時自愈說) Mashi (馬蒔) had a theory that Lifting Qi is generated when Six Kinds of Natural Factors are prosperous and reveals itself when its season comes. (極則生承氣 至本位著說) Zhangjiebin (張介賓) asserted that when Six Kinds of Natural Factors are thriving, Lifting Qi, as a restraining force, is generated to disperse the thriving natural factors and leads to a new one. (前之退而後之進說) Zhangqi (張琦)'s argument was that if Lifting Qi restrains the main Qi, a son of the main Qi is generated and every four season goes in harmony. (承氣制則生化說) Hemengyao (何夢瑤) had an argument that a son of the restrained Qi succeeds to its father and later achieves equilibrium by restraining Excessive Qi. (被克承父 制之平衡說).